Back to Advisory Circulars Main Page Back to Advisory Circulars Main Page

Will search within 'Airport Improvement Program (AIP)' only. Search all ACs.

76 - 89 of 89 results.
First Previous 1 2 3 [4] Next Last
Number Office Title Date
150/5220-22B AAS-100 Engineered Materials Arresting Systems (EMAS) for Aircraft Overruns

Contains standards for the planning, design, installation, and maintenance of Engineered Materials Arresting Systems (EMAS) in runway safety areas (RSAs).

09-27-2012
150/5300-13A AAS-100 Airport Design

Contains the Federal Aviation Administration’s (FAA) standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.This substantial revision fully incorporates all previous changes to AC 150/5300-13 as well as new standards and technical requirements.

See also Interim Guidance on Land Uses Within a Runway Protection Zone.

CHANGE 1 (02-26-2014)

This change replaces Runway Reference Code (RRC) with new Approach and Departure Reference Code (APRC and DPRC) designations; expands Taxiway Fillet information and adds a new Appendix 8, Taxiway Fillet Design; adjusts TDG limits, with associated changes to fillet dimensions; moves Figure 4-1 to Chapter 1; combines Tables 3-4 and 3-5 to form Standards for Instrument Approach Procedures; incorporates minor editorial corrections; adds a Record of Changes at the end of the AC; and incorporates revisions describes in the Errata Sheet for the original release.

See also Additional Design Tools and Drawings for Change 1.

09-28-2012
150/5345-42G AAS-100 Specification for Airport Light Bases, Transformer Housings, Junction Boxes, and Accessories

This AC contains the specifications for airport light bases, transformer housings, junction boxes, and accessories. This AC is not intended to be a compilation of currently available product designs. It provides the basic standard requirements for critical dimensions and performance requirements to which all manufacturers must demonstrate compliance.

01-23-2013
150/5395-1A AAS-100 Seaplane Bases

This AC provides guidance to assist operators in planning, designing, and constructing seaplane bases and associated facilities.

08-06-2013
150/5300-14C AAS-100 Design of Aircraft Deicing Facilities

This AC provides standards and recommendations for use in the design of aircraft deicing facilities.

08-07-2013
150/5320-5D AAS-100 Airport Drainage Design

This AC provides guidance for engineers, airport managers, and the public about the design and construction of airport surface storm drainage systems; and subsurface drainage systems for paved runways, taxiways, and aprons. It incorporates the DOD Unified Facilities Criteria (UFC) draft document, Surface Drainage Design, dated August 1, 2006. This revision adds guidance that was not included in the original DOD document. See paragraph 5,, "Purpose of this Revision."

08-15-2013
150/5345-7F AAS-100 Specification for L-824 Underground Electrical Cable for Airport Lighting Circuits

This AC provides specifications for L-824 underground electrical cable for airport lighting circuits.

08-19-2013
150/5340-5D AAS-100 Segmented Circle Airport Marker System

This AC provides standards for a system of airport marking consisting of certain pilot aids and traffic control devices.

09-25-2013
150/5345-27E AAS-100 Specification for Wind Cone Assemblies

This AC contains a specification for wind cone assemblies to be used to provide wind information to pilots. This revision revises the equipment qualification requirements to be furnished under the Federal grant assistance program for airports, applies photometric requirements for internally lighted wind cones to both Size 1 and Size 2 windsocks, and makes editorial changes.

09-26-2013
150/5360-12F AAS-100 Airport Signing and Graphics

This AC provides guidance on airport terminal and landside wayfinding, signing, and graphics. It focuses on four areas of the airport: roadways, parking, curbside and ground transportation, and terminal. This version is a substantial rewrite and incorporates the recommendations and guidelines developed under Airport Cooperative Research Program (ACRP) Report 52, Wayfinding and Signing Guidelines for Airport Terminals and Landside, completed in 2011.

09-26-2013
150/5340-1L AAS-100 Standards for Airport Markings

This AC contains the FAA standards for markings used on airport runways, taxiways, and aprons.

09-27-2013
150/5340-26C AAS-100 Maintenance of Airport Visual Aid Facilities

This AC provides guidance and specifications for the Maintenance of airport Visual Aid Facilities.

06-20-2014
150/5340-30H AAS-100 Design and Installation Details for Airport Visual Aids
This AC provides guidance and recommendations about the installation of airport visual aids.
07-21-2014
150/5370-10G AAS-100 Standards for Specifying Construction of Airports

The standards contained in this AC relate to materials and methods used for the construction of airports. Items covered in this AC include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation.

Access related Pay Reduction Spreadsheets on our Airport Design Software page.

07-21-2014
76 - 89 of 89 results.
First Previous 1 2 3 [4] Next Last