« Back to Advisory Circulars main page

Will search within 'Airport Improvement Program (AIP)' only. Search all ACs.

1 - 25 of 87 results.

Export (CSV)

Search results
Number Office Title Date
150/5100-13B AAS-100 Development of State Standards for Nonprimary Airports

Provides guidelines for the development of State standards for and the use of State highway specifications for pavement construction at nonprimary public-use airports as provided for in title 49 United States Code (USC), Sections 47105(c) and 47114(d)(5), respectively.

08-31-2011
150/5100-14D AAS-100 Architectural, Engineering, and Planning Consultant Services for Airport Grant Projects
Provides guidance for airport sponsors in the selection and employment of architectural, engineering, and planning consultants under Federal Aviation Administration airport grant programs.
09-30-2005
150/5100-14E AAS-100 Architectural, Engineering, and Planning Consultant Services for Airport Grant Projects

This AC provides guidance for airport sponsors in the selection and engagement of architectural, engineering, and planning consultants. It also discusses services that normally would be included in an airport grant project, types of contracts for these services, contract format and provisions, and guidelines for determining the reasonableness of consultant fees. Please see the Principal Changes paragraph for a list of major changes from the last version of this AC.

09-30-2014
150/5210-5D AAS-100 Painting, Marking, and Lighting of Vehicles Used on an Airport

Provides guidance, specifications, and standards for painting, marking, and lighting of ground vehicles operating in the airport air operations area (AOA). The approved lights, colors, and markings described in the AC assure the conspicuity of vehicles operating in the AOA from both the ground and the air. The AC contains new specifications and recommendations for the painting, marking, and lighting of Towbarless Tow Vehicles (TLTVs).

04-01-2010
150/5210-15A AAS-100 Aircraft Rescue and Firefighting Station Building Design
Contains information, references and guidelines for construction of Aircraft Rescue and Fire Fighting (ARFF) station building design.
09-10-2008
150/5210-18A AAS-100 Systems for Interactive Training Of Airport Personnel
Provides guidance in the design of systems for interactive training of airport personnel, which are eligible for funding under the Airport Improvement Program (AIP) and with Passenger Facility Charge (PFC) revenues.
09-29-2008
150/5210-19A AAS-100 Driver's Enhanced Vision System (DEVS)
Contains performance standards, specifications, and recommendations for DEVS equipment on Aircraft Rescue and Fire Fighting (ARFF) vehicles.
06-12-2009
150/5220-10E AAS-100 Guide Specification for Aircraft Rescue and Fire Fighting (ARFF) Vehicles

Provides an interactive specification that airports can use in procuring Aircraft Rescue and Fire Fighting (ARFF) vehicles. It describes the selection process, vehicle requirements, and how to produce formal specifications.

06-01-2011
150/5220-17B AAS-100 Aircraft Rescue and Fire Fighting (ARFF) Training Facilities

Provides guidance on the design, construction, and operation of aircraft rescue and fire fighting (ARFF) training facilities.

09-30-2010
150/5220-18A AAS-100 Buildings for Storage and Maintenance of Airport Snow and Ice Control Equipment and Materials
Provides guidance for the site selection and design of buildings used to store and maintain airport snow and ice control equipment, store approved materials, and provide personnel areas required to support the requirements under the airport operator’s winter storm management plan.
09-14-2007
150/5220-20A AAS-100 Airport Snow and Ice Control Equipment

This advisory circular provides guidance to assist airport operators in the procurement of snow and ice control equipment for airport use.

09-24-2014
150/5220-21C AAS-100 Aircraft Boarding Equipment

Contains the FAA's performance standards, specifications, and recommendations for the design, manufacture, testing and maintenance of equipment used in the boarding of airline passengers. The physical area covered in this AC is that which is bounded by the door of the passenger terminal area, on one end, to the door of the aircraft, on the other end. Although this AC refers only to aircraft boarding (enplaning), all references apply equally to disembarking (deplaning) with the described procedures occurring in reverse order.

The previous version of this AC discussed only the passenger lift scenario and associated equipment. This document updates that effort and addresses the other methods and equipment used to board an aircraft, including passenger boarding bridges, ramps, lifts, and aircraft boarding chairs.

06-29-2012
150/5220-22B AAS-100 Engineered Materials Arresting Systems (EMAS) for Aircraft Overruns

Contains standards for the planning, design, installation, and maintenance of Engineered Materials Arresting Systems (EMAS) in runway safety areas (RSAs).

09-27-2012
150/5220-23 AAS-100 Frangible Connections

Contains specifications for the frangible connections used to support objects located in airfield safety areas, including fuse bolts, special material bolts, frangible couplings, tear-through fasteners, and tear-out sections.

This AC is based on the performance standards, specifications, and recommendations contained in the International Civil Aviation Organization (ICAO) Aerodrome Design Manual, Part 6, Frangibility, and the U.S. Air Force (USAF) Engineering Technical Letter (ETL) 01-20: Guidelines for Airfield Frangibility Zones.

04-27-2009
150/5220-24 AAS-100 Foreign Object Debris Detection Equipment

Provides information that airports can use to procure foreign object debris (FOD) detection equipment. Contains minimum performance specifications for systems and equipment that detect foreign objects on airports, including stationary radar, stationary electro-optical, stationary hybrid radar and electro-optical, and mobile radar.

See also Buy American Preferences to view:

  • Notice of Decision to Issue Buy American Waivers for Foreign Object Debris (FOD) Detection Equipment (11/28/2010)
  • Notice to Manufacturers of Foreign Object Debris (FOD) Detection Equipment (8/5/2010)
  • Waiver request process
09-30-2009
150/5220-25 AAS-100 Airport Avian Radar Systems

Provides guidance on the use of avian radar systems to supplement an airport’s Wildlife Hazard Management Plan (WHMP) and reduce the potential avian threats to aircraft.

See also:

11-23-2010
150/5220-26 AAS-100 Airport Ground Vehicle Automatic Dependent Surveillance - Broadcast (ADS-B) Out Squitter Equipment

Provides guidance on the development, installation, testing, approval, and maintenance of Automatic Dependent Surveillance – Broadcast (ADS-B) Out squitter units for airport ground vehicles. Using this AC, airports will be able to acquire approved and authorized airport ground vehicle ADS-B squitter units that are compliant with Title 14 Code of Federal Regulations (CFR), Part 91, Automatic Dependent Surveillance-Broadcast (ADS–B) Out Performance Requirements to Support Air Traffic Control (ATC) Service, as well as the initial set of ADS-B applications. Please note that the technical specifications for manufacturing ADS-B squitter units for airport ground vehicles are published in the FAA’s document, Vehicle Automatic Dependent Surveillance - Broadcast (ADS-B) Specification, Version 2.4, published May 1, 2012.

Contact the appropriate FAA Airport District Office or Regional Airports Division to discuss Airport Improvement Program (AIP) eligibility.

Learn more about Automatic Dependent Surveillance-Broadcast (ADS-B).

CHANGE 1 (09-01-2012)

Provides guidance on the development, installation, testing, approval, and maintenance of Automatic Dependent Surveillance – Broadcast (ADS-B) Out squitter units for airport ground vehicles. Change 1 updates the ADS-B Specification version number, Table 1 to show airports with existing or planned FAA surveillance systems, and Appendix A to list qualified products.

11-14-2011
150/5300-9B AAS-100 Predesign, Prebid, and Preconstruction Conferences for Airport Grant Projects

Provides guidance for conducting predesign, prebid, and preconstruction conferences for projects funded under the FAA airport grant program. This version adds quality acceptance as a topic of discussion for the preconstruction conference, items to be addressed in the engineer’s report, details about what should be included in the phasing plan, and discussion of construction management plans.

09-30-2009
150/5300-13A AAS-100 Airport Design

Contains the Federal Aviation Administration’s (FAA) standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.This substantial revision fully incorporates all previous changes to AC 150/5300-13 as well as new standards and technical requirements.

See also Interim Guidance on Land Uses Within a Runway Protection Zone.

CHANGE 1 (02-26-2014)

This change replaces Runway Reference Code (RRC) with new Approach and Departure Reference Code (APRC and DPRC) designations; expands Taxiway Fillet information and adds a new Appendix 8, Taxiway Fillet Design; adjusts TDG limits, with associated changes to fillet dimensions; moves Figure 4-1 to Chapter 1; combines Tables 3-4 and 3-5 to form Standards for Instrument Approach Procedures; incorporates minor editorial corrections; adds a Record of Changes at the end of the AC; and incorporates revisions describes in the Errata Sheet for the original release.

See also Additional Design Tools and Drawings for Change 1.

09-28-2012
150/5300-14C AAS-100 Design of Aircraft Deicing Facilities

This AC provides standards and recommendations for use in the design of aircraft deicing facilities.

08-07-2013
150/5300-15A AAS-100 Use Of Value Engineering For Engineering And Design Of Airport Grant Projects
Provides guidance on using value engineering (VE) in airport projects funded under the Federal Aviation Administration's (FAA's) Airport Grant program.
09-30-2008
150/5300-16A AAS-100 General Guidance and Specifications for Aeronautical Surveys: Establishment of Geodetic Control and Submission to the National Geodetic Survey

Explains the specifications for establishing geodetic control on or near an airport. It also describes how to submit the information to the National Geodetic Survey (NGS) for approval and inclusion in the National Spatial Reference System (NSRS) in support of aeronautical information surveys. See also Airports GIS Video Training Series.

09-15-2007
150/5300-17C AAS-100 Standards for Using Remote Sensing Technologies in Airport Surveys

Provides guidance on the use of remote sensing technologies in the collection of data describing the physical infrastructure of an airport. This version is a substantial rewrite and includes new sections on remote sensing technologies other than aerial imagery (primarily LIDAR) for collecting airport data. See also the Airports GIS website.

09-30-2011
150/5300-18B AAS-100 General Guidance and Specifications for Submission of Aeronautical Surveys to NGS: Field Data Collection and Geographic Information System (GIS) Standards

Provides the specifications for the collection of airport data for the FAA Airport Surveying – Geographic Information System (GIS) Program. Also explains how to submit data to the FAA, which will forward the safety critical data to the National Geodetic Survey (NGS) for independent verification and validation. The standards covered in this document provide critical information for the operation and safety of the National Airspace System (NAS) and are classified as critical by the International Civil Aviation Organization (ICAO). ICAO Annex 15 defines data as critical when “there is a high probability when using corrupted critical data that the continued safe flight and landing of an aircraft would be severely at risk with the potential for catastrophe.” The information furnished under these standards covers the entire spectrum of the FAA’s airport data requirements. See also FAA Airport Surveying - GIS Program and Airports GIS Video Training Series.

CHANGE 1 (02-24-2014)

This change incorporates updated airport data collection standards and deletes outdated information. These changes clarify airport data collection and ongoing Airports GIS and other system enhancements.

05-21-2009
150/5320-5D AAS-100 Airport Drainage Design

This AC provides guidance for engineers, airport managers, and the public about the design and construction of airport surface storm drainage systems; and subsurface drainage systems for paved runways, taxiways, and aprons. It incorporates the DOD Unified Facilities Criteria (UFC) draft document, Surface Drainage Design, dated August 1, 2006. This revision adds guidance that was not included in the original DOD document. See paragraph 5,, "Purpose of this Revision."

08-15-2013

1 - 25 of 87 results.

Export (CSV)