« Back to Advisory Circulars main page

526 - 550 of 640 results.

Export to MS Excel

Search results
Number Office Title Date
150/5210-13A AAS-120 Water Rescue Plans, Facilities, and Equipment (Cancelled) Date Cancelled: 04-15-2004 05-31-1991
150/5210-5B AAS-120 Painting, Marking, and lighting of Vehicles used on and Airports (Cancelled) Provides guidance, specifications, and standards, in the interest of airport personnel safety and operational efficiency, for painting, marking, and lighting of vehicles operating in the airport air operations areas. Date Cancelled: 08-31-2007 07-11-1986
150/5325-4A AAS-110 Runway Length Requirements for Airport Design (Consolidated reprint includes Change 1 dtd 3-11-91) (Cancelled) Date Cancelled: 07-01-2005 01-29-1990
150/5220-4B AAS-100 Water Supply Systems for Aircraft Fire and Rescue Protection (Cancelled)

Provides guidance for the selection of a water source and standards for the design of a distribution system to support aircraft rescue and firefighting (ARFF) service operations on airports.

The AC was cancelled for the following reason. The primary reference upon which the document is based, National Fire Protection Association (NFPA) 419 - Guide for Master Planning Airport Water Supply Systems for Fire Protection, was cancelled in 1996. The relevant information from that specification has been inserted in other NFPA standards. Therefore, the AC is no longer necessary as water supply safety is ensured through a variety of other guidance material used by airport operators and architectural and engineering firms.

Date Cancelled: 09-09-2011
07-29-1992
150/5390-3 AAS-100 Vertiport Design (Cancelled)

Provides guidance to planners and communities interested in developing a civil vertiport or vertistop.

Date Cancelled: 07-28-2010
05-31-1991
150/5300-15 AAS-100 Use of Value Engineering for Engineering and Design of Airport Grant Projects (Cancelled) Provides guidance for the use of value engineering (VE) in airport projects funded under the Airport Grant Program. Date Cancelled: 09-30-2008
Cancelled By: 150/5300-15A
09-09-1993
150/5370-11A AAS-100 Use of Nondestructive Testing Devices in the Evaluation of Airport Pavement (Cancelled)

Provides guidance on the use of nondestructive testing equipment to evaluate the load-carrying capacity of airport pavements.

Date Cancelled: 09-30-2011
12-29-2004
150/5340-19 AAS-100 Taxiway Centerline Lighting System (Cancelled) Cancelled as of 9-1-98. Date Cancelled: 09-01-1998
Cancelled By: 150/5340-28
11-14-1968
150/5210-18 AAS-100 Systems for Interactive Training of Airport Personnel (Cancelled) Provides guidance on the design of systems for interactive training of airport personnel. Date Cancelled: 09-29-2008
Cancelled By: 150/5210-18A
04-13-1994
150/5320-5C AAS-100 Surface Drainage Design (Cancelled)

Provides guidance for engineers, airport managers, and the public in the design and maintenance of airport surface drainage systems. Combines existing surface drainage topics covered in different agency manuals into one Unified Facilities Criteria (UFC) document that will serve as the design and analysis standard for surface drainage for FAA and the Department of Defense. Consolidated file contains Change 1.

The AC is 12.7 MB (see Complete file). Because of its size, the AC has been broken into several parts to make it easier to download (see Parts 1-13).

Date Cancelled: 08-15-2013
CHANGE 1 (09-30-2008)
Provides guidance about the design and construction of subsurface drainage facilities for paved runways, taxiways, and aprons where the water can be drained from the pavement structure by gravity flow.
09-29-2006
150/5370-10F AAS-100 Standards for Specifying Construction of Airports (Cancelled)

Provides standards for the construction of airports. Items covered in this AC include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation.

Access related Pay Reduction Spreadsheets on our Airport Design Software page.

Date Cancelled: 07-21-2014
09-30-2011
150/5370-10E AAS-100 Standards for Specifying Construction of Airports (Cancelled)

Version E updates Item P-620, Runway and Taxiway Painting, to include new information on Preformed Thermoplastic Airport Pavement Markings and Application—Preformed Airport Pavement Markings; clarifies that Prohibited Materials cannot exceed permissible limits as specified in relevant Federal Regulations; adds Item P-621, Saw-Cut Grooves; and updates references to Saw-Cut Grooves in Items P-401, Plant Mix Bituminous Pavements, and P-501, Portland Cement Concrete.

Because of the size of this document, it is available as a single file (see Complete) and as three smaller files. See Construction Standards for Airports to access individual files for each item or part.

Access related Pay Reduction Spreadsheets on our Airport Design Software page.

Date Cancelled: 09-30-2011
09-30-2009
150/5370-10D AAS-100 Standards for Specifying Construction of Airports (Cancelled)

Provides standards for the construction of airports. Items covered include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation. This version adds Item P-632, Bituminous Pavement Rejuvenation.

Because of the size of this document, it is available as a single file (see Complete) or as three smaller files. See Construction Standards for Airports to access individual files for each item or part.

See below for access to revised Item P-620, Runway and Taxiway Painting, and new Item P-621, Saw-Cut Grooves, from AC 150/5370-10E.

Date Cancelled: 11-16-2009
09-30-2008
150/5370-10C AAS-100 Standards for Specifying Construction of Airports (Cancelled)

Provides standards for the construction of airports. Items covered include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation. See Errata Sheet below.

Because of the size of this document, it is available as a single file (see Complete) or as three smaller files (see Parts 1-3). See Construction Standards for Airports to access individual files for each item or part.

Date Cancelled: 09-30-2008
Cancelled By: 150/5370-10D
09-29-2007
150/5370-10B AAS-100 Standards for Specifying Construction of Airports (Cancelled) Provides standards for the construction of airports. Items covered include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation. This replaces all advance copies. See also Errata Sheet below.

Because of the size of this document, it is available as a single file (see Complete) and as three smaller files (see Parts 1-3). Date Cancelled: 09-29-2007
04-25-2005
150/5340-1K AAS-100 Standards for Airport Markings (Cancelled)

Contains the FAA standards for markings used on airport runways, taxiways, and aprons. This AC cancels the Signs and Marking Supplement (SAMS).

This document is consolidated to include Change 1, dated November 17, 2010.

Date Cancelled: 09-27-2013
CHANGE 1 (11-17-2010)

Change 1 corrects text and formatting errors, clarifies instructions and marking characteristics, and incorporates the corrections noted in the errata sheet for AC 150/5340-1K.

09-03-2010
150/5340-1J AAS-100 Standards for Airport Markings (Cancelled)

Describes the standards for markings used on airport runways, taxiways, and aprons.

Date Cancelled: 09-03-2010
CHANGE 1 (03-31-2008)
Extends enhanced taxiway centerline requirement to all certificated airports. Airports with less that 1.5 million annual passenger enplanements must implement the enhanced taxiway centerline within 1 year. All smaller certificated airports have 2 years. Cancelled by Change 2.
CHANGE 2 (06-06-2008)
Clarifies the intent of Change 1 and modifies certain compliance dates for airports located in areas that receive snow or ice storms. Cancels Change 1.
04-29-2005
150/5340-18E AAS-100 Standards For Airport Sign Systems (Cancelled)

Contains the Federal Aviation Administration standards for the siting and installation of signs on airport runways and taxiways. Incorporates mandatory hold signs that reflect changed standards for the Precision Obstacle Free Zone (POFZ) and Category (CAT II/III) operations. Includes sign standards to assist airport operators in designating (1) the POFZ holding position in those instances where a taxiway, holding apron, or other movement area would result in an aircraft fuselage or tail penetrating, and (2) the alternative holding position on a taxiway during CAT II/III operations necessary to maintain adequate aircraft separation.

Date Cancelled: 08-16-2010
09-12-2008
150/5335-5A AAS-100 Standardized Method of Reporting Airport Pavement Strength – PCN (Cancelled)

Provides guidance for using the standardized International Civil Aviation Organization (ICAO) method to report airport pavement strength. The standardized method is known as the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method.

Date Cancelled: 08-26-2011
09-28-2006
150/5335-5B AAS-100 Standardized Method of Reporting Airport Pavement Strength - PCN (Cancelled)

Provides guidance for using the standardized International Civil Aviation Organization (ICAO) method, called the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method, to report airport runway, taxiway, and apron pavement strength. Includes instructions for using the COMFAA program to calculate ACN values to determine PCN.

Also provides guidance for reporting changes to airport data that is generally published on Federal Aviation Administration (FAA) Form 5010, Airport Master Record, particularly those data elements associated with Gross Weight (Data Elements 35 through 38) and Pavement Classification Number (Data Element 39).

Access COMFAA and related Support Spreadsheet on our Airport Design Software page.

Date Cancelled: 08-14-2014
08-26-2011
150/5345-27D AAS-100 Specification for Wind Cone Assemblies (Cancelled)

Contains a specification for wind cone assemblies to be used to provide wind information to pilots of aircraft.

Date Cancelled: 09-26-2013
06-02-2004
150/5345-47B AAS-100 Specification for Series to Series Isolation Transformers for Airport Lighting Systems (Cancelled)

Contains the specifications requirements for series-to-series isolation transformers for use in airport lighting systems.

Date Cancelled: 07-22-2011
06-30-2005
150/5345-44G AAS-100 Specification for Runway and Taxiway Signs (Cancelled) Contains a specification for lighted and unlighted signs to be used on taxiways and runways. Date Cancelled: 09-28-2007 07-08-2004
150/5345-46C AAS-100 Specification for Runway and Taxiway Light Fixtures (Cancelled) Contains FAA specifications for light fixtures to be used on airport runways and taxiways. Date Cancelled: 05-19-2009
Cancelled By: 150/5345-46D
09-12-2006
150/5345-50A AAS-100 Specification for Portable Runway and Taxiway Lights (Cancelled) Contains standards for portable runway and taxiway lights and runway end identifier lights for temporary use to permit continued aircraft operations while all or part of a runway lighting system is inoperative. Date Cancelled: 09-20-2007 09-19-2005

526 - 550 of 640 results.

Export to MS Excel