FAA Certificated Technical Personnel Examiners Directory
Date Cancelled: 02-08-2008
Cancelled By: 183-32T
FAA Inspection Authorization Directory
Date Cancelled: 02-08-2008
Cancelled By: 65-13BB
Low-Impact Resistant (LIR) Structures
Contains the FAA specifications for low-impact resistant (LIR) structures used to support approach lighting systems (ALS) at airports.
Date Cancelled: 04-06-2007
Cancelled By: 150/5345-45C
CERTIFICATION OF 30-SECOND AND 2-MINUTE ONE-ENGINE-INOPERATIVE (OEI) RATINGS FOR ROTORCRAFT TURBINE ENGINES
This advisory circular (AC) provides information and guidance on acceptable methods, but not the only methods, for compliance with the requirements for 30-second OEI and 2-minute OEI rotorcraft turbine engine ratings in part 33 of Title 14 of the Code of Federal Regulations (14 CFR Part 33).
Date Cancelled: 06-11-2009
Cancelled By: 33-7A
Voluntary Disclosure Reporting Program
Date Cancelled: 04-29-2009
Cancelled By: 00-58B
Specification for Runway and Taxiway Light Fixtures
Contains FAA specifications for light fixtures to be used on airport runways and taxiways.
Date Cancelled: 05-19-2009
Cancelled By: 150/5345-46D
Specification for L-853, Runway and Taxiway Retroreflective Markers
Contains the FAA standards for retroreflective markers for airport runways and taxiways. See also Errata Sheet below.Date Cancelled: 09-26-2011
Standardized Method of Reporting Airport Pavement Strength – PCN
Provides guidance for using the standardized International Civil Aviation Organization (ICAO) method to report airport pavement strength. The standardized method is known as the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method.Date Cancelled: 08-26-2011
Surface Drainage Design
Provides guidance for engineers, airport managers, and the public in the design and maintenance of airport surface drainage systems. Combines existing surface drainage topics covered in different agency manuals into one Unified Facilities Criteria (UFC) document that will serve as the design and analysis standard for surface drainage for FAA and the Department of Defense. Consolidated file contains Change 1.
United States - Canadian BASA/MIP Maintenance
Provides updated information and guidance to aircraft owners/operators and maintenance personnel concerning mechanical work performed on U.S. registered aircraft by Canadian maintenance personnel and on Canadian registered aircraft by U.S. maintenance personnel and on Canadian registered aircraft by U.S. maintenance personnel.Date Cancelled: 04-23-2011
Specification for Airport Light Bases, Transformer Housings, Junction Boxes, and Accessories
Contains the specifications for containers designed to serve as airport light bases, transformer housings, junction boxes, and accessories. Provides the basic standard requirements for critical dimensions and performance requirements to which all manufacturers must demonstrate compliance.Date Cancelled: 01-23-2013
Use of Child Restraint Systems on Aircraft
Provides information and practices regarding the use of Child Restraint Systems (CRS) on aircraft. It is intended to be used as resource during the development, implementation and revision of aircraft operator procedures and training programs regarding the use of CRS.Date Cancelled: 09-17-2010
|65-32||AFS-306||Certification of Repairmen (Light-Sport Aircraft) (Cancelled) Date Cancelled: 02-08-2013||12-13-2006|
Protection of Aircraft Electrical / Electronic Systems Against the Indirect Effects of Lightning
Provides information and guidance concerning an acceptable means, but not the only means, of compliance with Parts 23, 25, 27, and 29 of the FAR as applicable for preventing hazardous effects, due to lightning, from occurring to electrical/electronic systems performing critical essential functions. This material is neither mandatory nor regulatory in nature and does not constitute a regulation. The applicant may elect to establish an alternative method of compliance that is acceptable to the FAADate Cancelled: 09-07-2011
Aviation Maintenance Technician Awards Program
Date Cancelled: 06-03-2009
Cancelled By: 65-25E
The Certification of aircraft Electrical and Electronic Systems for Operation in the High-Intensity Radiated Fields (HIRF) Environment
This advisory circular (AC) will show you how to gain Federal Aviation Administration (FAA) approval of your compliance with Title 14, Code of Federal Regulations (14 CFR) §§ 23.1308, 25.1317, 27.1317, and 29.1317, High-intensity Radiated Fields (HIRF) protection. This AC is not mandatory and does not constitute a regulation. It describes an acceptable means, but is not the only means, to show you how to gain certification for protection of the operation of electrical and electronic systems on an aircraft when the aircraft is exposed to an external HIRF environment. However, if you use the means described in this AC, you must follow it in all important respects.Date Cancelled: 05-30-2014
Painting, Marking, and Lighting of Vehicles Used on an Airport
Provides guidance, specifications, and standards for painting, marking, and lighting of vehicles operating in the airport air operations area (AOA).Date Cancelled: 04-01-2010
Airport Winter Safety and Operations
Provides guidance to assist airport operators in developing a snow and ice control plan, conducting and reporting runway friction surveys, and establishing snow removal and control procedures. Cancels AC 150/5220-13B, Runway Surface Condition Sensor Specification Guide, dated March 27, 1991.
Date Cancelled: 12-09-2008
Cancelled By: 150/5200-30C
Segmented Circle Airport Marker System
Sets forth standards for a system of airport marking consisting of certain pilot aids and traffic control devices.Date Cancelled: 09-25-2013
General Guidance and Specifications for Aeronautical Survey Airport Imagery Acquisition and Submission to the National Geodetic Survey
Provides the specifications for Airport Imagery Acquisition and how to submit the imagery to the National Geodetic Survey for approval in support of aeronautical information and airport engineering surveys.
Date Cancelled: 09-29-2008
Cancelled By: 150/5300-17B
General Guidance and Specifications for Submission of Aeronautical Surveys to NGS: Field Data Collection and Geographic Information System (GIS) Standards
Provides the specifications for the collection of airport survey data through field and office methodologies in support of aeronautical information and airport engineering surveys. It also explains how to submit data to the FAA, which will forward the data to the National Geodetic Survey (NGS) for quality control purposes. The primary purpose of these general guidelines and specifications is to list the requirements for aeronautical surveys conducted at airports in support of the FAA Airport Surveying–GIS Program.
Cancelled By: 150/5300-18B
Design of Aircraft Deicing Facilities
Provides standards, specifications, and guidance for designing aircraft deicing facilities. Note: Column No. 1 of Table 3-1 in this AC is cancelled and should be replaced with Column No. 1 of Table 3-2..
See also Draft AC 150/5300-14B. Date Cancelled: 02-05-2008
Cancelled By: 150/5300-14B
Design and Installation Details for Airport Visual Aids
Provides guidance and recommendations on the installation of airport visual aids.
Because of the size of the document, it is available as one large file (see Complete) or as five smaller files (see Parts 1-5).Date Cancelled: 09-30-2008
Cancelled By: 150/5340-30D
Guide Specification for Aircraft Rescue and Fire Fighting Vehicles
Contains information, references, and guidelines for a family of aircraft rescue and fire fighting (ARFF) vehicles. Vehicles meeting this standard satisfy Title 14 Code of Federal Regulations (CFR) Part 139, Certification of Airports, and meet the requirements for airport response to aircraft fire fighting.
Specification for L-821, Panels for the Control of Airport Lighting
Provides the specified manufacturing requirements for panels used for remote control of airport lighting and auxiliary systems.Date Cancelled: 09-29-2010