« Back to Advisory Circulars main page

126 - 150 of 758 results.

Export to MS Excel

Search results
Number Office Title Date
20-65 AIR-200 U.S. Airworthiness Certificates and Authorizations for Operation of Domestic and Foreign Aircraft (Cancelled) Provides general information and guidance concerning issuance of airworthiness certificates for U.S. registered aircraft, and issuance of special flight authorizations for operation in the United States of foreign aircraft not having standard airworthiness certificates issued by the country of registry. Date Cancelled: 07-08-2004
Cancelled By: 20-65A
08-11-1969
21-42 AIR-200 Transition Document for 14 CFR Part 21 (Cancelled)

This advisory circular (AC) provides information for production approval holders (PAH) under Title 14, Code of Federal Regulations (14 CFR) part 21, Certification Procedures for Products, Articles, and Parts. This AC guides PAHs in developing and maintaining quality systems for the products and articles they produce. This guidance aids the applicant for a production approval or current PAH in developing a quality system that both meets the needs of the PAH and is compliant with the regulations. You can find this AC at http://www.faa.gov/regulations_policies/advisory_circulars/.

Date Cancelled: 06-11-2012
10-16-2009
20-96 AIR-200 Surplus Military Aircraft: A Briefing for Prospective Buyers (Cancelled)

Provides many answers to questions regarding the purchasing of surplus military aircraft (type certification, is the aircraft flyable, is it sold for spare parts, scrap?).

Date Cancelled: 02-15-2015
12-02-1976
21-20C AIR-200 Supplier Surveillance (Cancelled)

 

suppliers by a Federal Aviation Administration (FAA) production approval holder (PAH).

b.

 

 

This AC provides an acceptable means, but not the only means, of compliance with Title 14,

c.

requested a conformity inspection are not covered by the guidance outlined in this AC.

Prototype components for products used in type certification programs for which the FAA has

 

Code of Federal Regulations (14 CFR), part 21, Certification Procedures for Products and

Parts (hereafter referred to as part 21).

Date Cancelled: 10-16-2009
09-24-2009
21-33 AIR-200 Quality Assurance of Software used in Aircraft of Related Products (Cancelled)

Provides an acceptable means, but not the only means, to show compliance with the quality assurance requirements of FAR Par 21, Certification Procedures for Products and Parts, as applicable to the production of software used in type certificated aircraft or related products (airborne software). Also provides supplemental guidance for the establishment of a quality control or inspection to control the development and production of software used in type certification aircraft.

Date Cancelled: 10-16-2009
02-03-1993
21-36 AIR-200 Quality Assurance Controls for Product Acceptance Software (Cancelled)

Provides information and guidance concerning control of software and related digital input/output data (used by production approval holders (PAH) and their suppliers during manufacture, inspection and/or test) designed for use in the acceptance of airborne products. Provides an acceptable means, but not the only means, of compliance with the applicable Federal Aviation Regulations.

Date Cancelled: 10-16-2009
08-11-1993
20-132 AIR-200 Public Aircraft (Cancelled)

Provides guidance that public aircraft status does not exist outside the territorial limits of the United States.

Date Cancelled: 08-17-2011
12-21-1988
21-6A AIR-200 Production Under Type Certificate Only (Cancelled)

Provides information concerning Subpart F of FAR Part 21, and sets forth an acceptable means, not the sole means, of compliance with its requirements. SN 050-007-00636-5.

Date Cancelled: 10-16-2009
07-01-1982
21-1B AIR-200 Production Certificates (Cancelled)

Provides information concerning Subpart G of Federal Aviation Regulations (FAR) Part 21, and sets forth acceptable means of compliance with its requirements.

Date Cancelled: 10-16-2009
05-10-1976
21-9A AIR-200 Manufacturers Reporting Failures, Malfunctions, or Defects (Cancelled)

Provides information to assist manufacturers of aeronautical products (aircraft, aircraft engines, propellers, appliances, and parts) in notifying the Federal Aviation Administration of certain failures, malfunctions, or defects, resulting from design or quality control problems, in the products which they manufacture.

Date Cancelled: 08-12-2010
05-26-1982
21-43 AIR-200 Issuance of Production Approvals Under Subparts G, K, & O (Cancelled)

This advisory circular (AC) provides information for production approval holders (PAH) under Title 14, Code of Federal Regulations (14 CFR) part 21, Certification Procedures for Products, Articles, and Parts. This AC guides PAHs in developing and maintaining quality systems for the products and articles they produce. This guidance aids the applicant for a production approval or current PAH in developing a quality system that both meets the needs of the PAH and is compliant with the regulations. You can find this AC at http://www.faa.gov/regulations_policies/advisory_circulars/.

Date Cancelled: 10-01-2015
10-16-2009
21-44 AIR-200 Issuance of Export Airworthiness Approvals Under 14 CFR Part 21 Subpart L (Cancelled)

This advisory circular (AC) provides information about Title 14, Code of Federal Regulations (14 CFR) part 21, Certification Procedures for Products, Articles, and Parts. The AC covers subpart L, Export Airworthiness Approvals. This AC is not mandatory and does not constitute a regulation. This AC describes an acceptable means, but not the only means, to comply with these requirements. However, if you use the means described in the AC, you must follow it in all important respects.

Date Cancelled: 10-01-2015
10-16-2009
45-3 AIR-200 Installation, Removal, or Change of Identification Data and Identification Plates on Aircraft (Cancelled)

Provides information and guidance concerning the installation, removal, or change of identification data and identification plates on aircraft engines, and identifies an acceptable means, but not the only means, of compliance with FAR Part 45.

Date Cancelled: 08-03-2010
11-06-1985
21-19 AIR-200 Installation of Used Engines in New Production Aircraft (Cancelled) Date Cancelled: 07-02-2003
Cancelled By: 21-19A
04-26-1982
45-2D AIR-200 Identification and Registration Marking (Cancelled)

a. This advisory circular (AC) provides information about Title 14, Code of Federal Regulations (14 CFR), part 45, Identification and Registration Marking. This AC is not mandatory and does not constitute a regulation. This AC describes an acceptable means, but not the only means, to comply with the requirements for identifying aircraft, aircraft engines, or propellers with identification plates, and marking aircraft with nationality and registration marks. However, if you use the means described in the AC, you must follow it in all important respects.

b. A list of other related sections of 14 CFR and related publications, and definitions pertinent to this AC are located in the appendixes to this AC.

Date Cancelled: 10-01-2015
10-16-2009
45-2C AIR-200 Identification and Registration Marking (Cancelled)

Provides guidance and information concerning the identification and marking requirements of Federal Aviation Regulations (FAR) Part 45, and describes an acceptable means, but not the sole means, of compliance with the regulations.

Date Cancelled: 10-16-2009
08-05-2005
45-2B AIR-200 Identification and Registration Marking (Cancelled) Provides guidance and information concerning the identification and marking requirements of Federal Aviation Regulations (FAR) Part 45, and describes an acceptable means, but not the sole means, of compliance with the regulations. Date Cancelled: 08-05-2005
Cancelled By: 45-2C
07-16-2003
45-2A AIR-200 Identification and Registration Marking (Cancelled) Provides guidance and information concerning the identification and marking requirements of Federal Aviation Regulations (FAR) Part 45, and describes an acceptable means, but not the sole means, of compliance with the regulations. Date Cancelled: 07-16-2003
Cancelled By: 45-2B
04-16-1992
21-2K AIR-200 Export Airworthiness Approval Procedures (Cancelled)

Contains guidance and information on procedures for exporting aeronautical products and related special requirements submitted to the Federal Aviation Administration by other governments. SN: 050-007-01293-4,

Date Cancelled: 01-29-2010
09-30-2003
21-2J AIR-200 Export Airworthiness Approval Procedures (Cancelled) Date Cancelled: 09-30-2003
Cancelled By: 21-2K
06-27-2000
21-38 AIR-200 Disposition of Unsalvageable Aircraft Parts and Materials (Cancelled) 07-05-1994
20-27F AIR-200 Certification and Operation of Amateur-Built Aircraft (Cancelled)

Provides guidance and information relative to the airworthiness certification and operation of amateur-built aircraft.

Date Cancelled: 09-30-2009
09-26-2003
20-27E AIR-200 Certification and Operation of Amateur-Built Aircraft (Cancelled) Provides guidance and information relative to the airworthiness certification and operation of amateur-built aircraft. Date Cancelled: 09-26-2003
Cancelled By: 20-27F
09-26-2001
20-27D AIR-200 Certification and Operation of Amateur-Built Aircraft (Cancelled) Provides guidance and information relative to the airworthiness certification and operation of amateur-built aircraft. Date Cancelled: 09-26-2001
Cancelled By: 20-27E
06-22-1990
21-17 AIR-200 Carriage of Cargo in Restricted Category Aircraft and Other Special Purpose Operations (Cancelled)

This advisory circular (AC) is to advise that the carriage of cargo in a restricted category aircraft is considered a restricted category special purpose operation and provides procedures for designating other special purpose operations under Federal Aviation Regulation (FAR) 21,25(b)(7).

Date Cancelled: 04-24-2015
05-31-1982

126 - 150 of 758 results.

Export to MS Excel