|20-37E||AFS-350||Aircraft Propeller Maintenance Provides information and suggested procedures to increase service life and to minimize blade failures of metal propellers.||09-09-2005|
Aircraft Rescue Fire Fighting Equipment, Tools and Clothing
Contains references to the minimum requirements for the selection and performance of aircraft rescue and firefighting personal protective equipment (PPE), self contained breathing apparatus (SCBA), and powered rescue tools. Designed to assist airport management in the development of local procurement specifications for airport fire departments.
Aircraft Rescue and Fire Fighting (ARFF) Training Facilities
Provides guidance on the design, construction, and operation of aircraft rescue and fire fighting (ARFF) training facilities.
Aircraft Rescue and Fire Fighting Communications
Provides guidance to assist airport operators in preparing for Aircraft Rescue and Fire Fighting (ARFF) communications.
|150/5210-15A||AAS-100||Aircraft Rescue and Firefighting Station Building Design Contains information, references and guidelines for construction of Aircraft Rescue and Fire Fighting (ARFF) station building design.||09-10-2008|
Aircraft Secondary Barriers and Alternate Flight Deck Security Procedures
This advisory circular (AC) calls attention to RTCA Document (RTCA/DO-329) Aircraft Secondary Barriers and Alternative Flight Deck Security Procedures, as guidance to achieve effective protection of the flight deck as required by Title 14 of the Code of Federal Regulations (14 CFR) part 121 § 121.584(1)(a).
This AC is not mandatory and does not constitute a regulation. It describes an acceptable means, but not the only means, to comply with pertinent regulatory requirements.
|20-97B||AFS-306||Aircraft Tire Maintenance and Operational Practices This advisory circular (AC) provides recommended tire care and maintenance practices needed to assure the safety of support personnel and the continued airworthiness of aircraft. Specifically, this AC provides guidance on the installation, inflation, maintenance, and removal of aircraft tires. In addition, this AC provides guidance on those operational practices necessary to maintain safe aircraft operations. This AC is not mandatory and does not constitute a regulation. It is issued for guidance purposes and to outline acceptable tire maintenance and operational practices. In lieu of following this method without deviation, operators may elect to follow an alternative method that has also been found acceptable by the Federal Aviation Administration (FAA).||04-18-2005|
Aircraft Wake Turbulence
This advisory circular (AC) presents basic information on wake vortex behavior, alerts pilots to the hazards of aircraft wake turbulence, and recommends operational procedures to avoid wake turbulence encounters.
|120-27E||AFS-200/AFS-300||Aircraft Weight and Balance Control Provides one means, but not the only means, for obtaining approval of a weight and balance control system. It provides guidance to certificate holders that are required to have an approved weight and balance program by Title 14, Code of Federal Regulations (14 CFR) Part 121 or choose to have an approved program under 14 CFR Part 135.||06-10-2005|
Airfield Pavement Surface Evaluation and Rating Manuals
This AC provides limited guidance on understanding and rating the surface condition of flexible (asphalt) and rigid (concrete) airfield pavements. Appendices A and B of this AC include the Asphalt and Concrete Airfield Pavement Surface Evaluation and Rating Manuals (PASER Manuals). The FAA recommends the information and procedures contained in the manuals for use by airport staff and consultants, directly or in combination with additional testing and data collection, only when it is not possible to complete a more detailed pavement condition index (PCI) survey as part of a more comprehensive pavement maintenance management program.
|23-19A||ACE-100||Airframe Guide for Certification of Part 23 Airplanes Provides information and guidance concerning acceptable means, but not the only means, of complying with Title 14 of the Code of Federal Regulations (14 CFR) part 23 Subpart C and portions of Subpart D. It consolidates the substance of existing Civil Aeronautics Administration (CAA) and Federal Aviation Administration (FAA) letters into a single reference. It also presents information from certain presently existing AC's that cover general topics and specific airworthiness standards. Material in this AC is neither mandatory nor regulatory. AC methods may be freely chosen, or ignored, by an applicant who seeks to demonstrate regulatory compliance. Use of FAA published AC guidance frequently speeds the design approval process for an applicant.||04-30-2007|
|65-2D||AFS-640||Airframe and Powerplant Mechanics Certification Guide||01-30-1987|
Airline Transport Pilot Certification Training Program
This advisory circular (AC) provides information and courseware guidelines to authorized providers, to aid in the development of a training program which meets the requirements of Title 14 Code of Federal Regulations (14 CFR) part 61, § 61.156.
Airplane Flight Manual
Identifies the information that must be provided in Airplane Flight Manual (AFM) under the airworthiness regulations and provides guidance as to the form and content of the approved portion of an AFM.
|120-45A||AFS-205||Airplane Flight Training Device Qualification Provides an acceptable means of ensuring compliance with the FAR regarding the evaluation and qualification of all training devices in which flight training, qualification, or certification of airmen under Title 14, Code of Federal Regulations, is accomplished. Specifies the criteria to be used by the FAA when qualifying a device and determining what the qualification level should be.||02-05-1992|
|60-6B||AFS-820||Airplane Flight manuals (AFM), Approved Manual Materials, Markings, and Placards Airplanes Calls attention to the regulatory requirements relating to the subject and provides information to aid pilots to comply with these requirements.||09-25-1980|
|120-40B||AFS-205||Airplane Simulator Qualification Provides an acceptable means, but not the only means, of compliance with the Federal Aviation Regulations (FAR) regarding the evaluation of and qualification of airplane simulators used in training programs or airmen checking under Title 14 Code of Federal Regulations (CFR).||07-29-1991|
Airport Avian Radar Systems
Provides guidance on the use of avian radar systems to supplement an airport’s Wildlife Hazard Management Plan (WHMP) and reduce the potential avian threats to aircraft.
Airport Capacity And Delay
Explains how to compute airport capacity and aircraft delay for airport planning and design. Consolidated file contains Changes 1 and 2.
Note: Portions of this AC are under review for update. Please contact the National Planning and Environmental Division for assistance.
Because of the size of this document, it is available as one large file (see Complete) or as several smaller files (see Parts 1-4).
|150/5210-22||AAS-300||Airport Certification Manual (ACM) Provides methods for meeting the certification requirements specified in Title 14, Code of Federal Regulations, Part 139, Certification of Airports. This AC cancels AC 139/201-1, Airport Certification Manual (ACM) and Airport Certification Specifications (ACS).||04-26-2004|
Airport Data and Information Program
Note: This AC is currently unavailable. Until further notice, please refer to the existing AC 150/5200-35A, Submitting the Airport Master Record in Order to Activate a New Airport.
This AC provides general guidance and information for airport owners and operators in the collection and management of data describing the physical infrastructure, characteristics, and services of their airport. This data is source material for the FAA’s aeronautical information databases, for use in the dissemination of aviation information to the public, preparation of government and private industry aeronautical charts, and related flight information publications. This AC also describes the schedule, frequency, and standards for airport inspections.
Contains the Federal Aviation Administration’s (FAA) standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.This substantial revision fully incorporates all previous changes to AC 150/5300-13 as well as new standards and technical requirements.
Airport Drainage Design
This AC provides guidance for engineers, airport managers, and the public about the design and construction of airport surface storm drainage systems; and subsurface drainage systems for paved runways, taxiways, and aprons. It incorporates the DOD Unified Facilities Criteria (UFC) draft document, Surface Drainage Design, dated August 1, 2006. This revision adds guidance that was not included in the original DOD document. See paragraph 5,, "Purpose of this Revision."
Airport Emergency Plan (Consolidated AC includes Change 2)
Provides guidance to the airport operator in the development and implementation of an Airport Emergency Plan (AEP). The AEP addresses essential emergency related and deliberate actions planned to ensure the safety of and emergency services for the airport populace and the community in which the airport is located.
Consolidated file includes Change 2 dated 11/3/2010. Change 2 updates the date by which AEPs must be submitted to June 30, 2011.
Airport Foreign Object Debris (FOD) Management
Provides guidance for developing and managing an airport foreign object debris (FOD) program. In addition, this AC provides specifications for the equipment used in FOD removal operations.
The described program addresses prevention, detection, removal, and evaluation as well as strategies and practices that can help reduce FOD at airports. The guidelines presented in this AC are advisory and can be implemented at the discretion of the airport operator in accordance with the airport operator’s approved Airport Certification Manual.
This AC cancels AC 150/5380-5B, Debris Hazards at Civil Airports, dated July 5, 1996.