William (Bill) O'Brien Aviation Maintenance Technician Awards Program
This advisory circular (AC) outlines the participation requirements for the Federal Aviation Administration (FAA) William (Bill) O’Brien Aviation Maintenance Technician (AMT) Awards Program. This revision to the AC provides instructions for AMTs and the employers of AMTs participating in the online William (Bill) O’Brien Awards Program and addresses all the changes to the program.
Windows and Windshields
Sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of Title 14, Code of Federal Regulations (14 CFR) part 25 pertaining to the certification requirements for windshields, windows, and mounting structure. Guidance information is provided for showing compliance with § 25.775(d), relating to structural design of windshields and windows for airplanes with pressurized cabins. Terms used in this AC, such as “shall” or “must,” are used only in the sense of ensuring applicability of this particular method of compliance when the acceptable method of compliance described herein is used. Other methods of compliance with the requirements may be acceptable. While these guidelines are not mandatory, they are derived from extensive Federal Aviation Administration (FAA) and industry experience in determining compliance with 14 CFR. This AC does not change, create any additional, authorize changes in, or permit deviations from, regulatory requirements.
[Large AC] Airframe and Powerplant Mechanics Airframe Handbook
Designed to familiarize student mechanics with airframe construction, repair, and the operating theory of airframe systems. SN 050-007-00391-9
[Large AC] Airframe and Powerplant Mechanics Powerplant Handbook
Designed to familiarize student mechanics with the construction, theory of operation, and maintenance of aircraft powerplants. SN 050-007-00373-1
[Large AC] Bilateral Airworthiness Agreements
Makes available to interested persons copies of all current U.S. Bilateral Airworthiness Agreements (BAA) together with an explanation of their intent. SN 050-007- 00614-4.
[Large AC] Corrosion Control for Aircraft
Summarizes current available data regarding identification and treatment of corrosive attack on aircraft structure and engine materials. SN 050-007-01044-3.
[Large AC] Evaluation of Flight Loads on Small Airlpanes with T, V, +, or Y Empennage Configurations
Provides information and guidance concerning compliance with Part 23 of the Federal Aviation Regulations (FAR) applicable to evaluation of empennage design flight loads on configurations where the horizontal tail surfaces are supported by the vertical tail, or have appreciable dihedral.
[Large AC] Oceanic Operations
Contains information and guidance to be used by operators and pilots planning oceanic flights.
|00-31A||[Large AC] United States (U.S.) National Aviation Standard for the Very High Frequency Omnidirectional Radio Range (VOR)/Distance Measuring Equipment (DME)/Tactical Air Navigation (TACAN) Systems||09-20-1982|
[Large AC] United States (U.S.) National Aviation Standard for the Very High Frequency Omnidirectional Radio Range (VOR)/Distance Measuring Equipment (DME)/Tactical Air Navigation (TACAN) Systems
This advisory Circular is issued in inform the aviation community of the establishment and content of the United States (U.S.) National Aviation Standard for the Very High Frequency Omni directional Radio Range (VOR)/Distance Measuring Equipment (DME)/Tactical Air Navigation (TACAN) Systems.