Approval of Flight Guidance Systems
This advisory circular (AC) describes an acceptable means for showing compliance with certain requirements of Title 14, Code of Federal Regulations (CFR) 25.1329, Flight guidance systems. While part 25 contains the airworthiness standards applicable to transport category airplanes, the guidance in this AC pertains to the functions of autopilots, flight directors, and automatic thrust control as well as any interactions with stability augmentation and trim functions. This revision incorporates minor changes associated with issuance of the final rule for Airplane and Engine Certification Requirements in Supercooled Large Drop, Mixed Phase, and Ice Crystal Icing Conditions.
|25.1353-1A||ANM-100||Electrical equipment and installations||10-22-2007|
|25.1357-1A||ANM-100||Circuit protective devices||10-22-2007|
|25.1360-1||ANM-100||Protection Against Injury This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1360 Precautions against injury||10-22-2007|
|25.1362-1||ANM-100||Electrical Supplies for Emergency Conditions This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1362, Electrical supplies for emergency conditions.||10-22-2007|
|25.1365-1||ANM-100||Electrical Appliances, Motors, and Transformers This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1365 Electrical appliances, motors, and transformers.||11-27-2007|
|25.1419-1A||ANM-112||Certification of Transport Category Airplanes for Flight in Icing Conditions Provides guidance for certification of airframe ice protection systems on transport category airplanes.||05-07-2004|
Compliance with the Ice Protection Requirements of §§ 25.1419(e), (f), (g), and (h)
This advisory circular (AC) describes an acceptable means for showing compliance with the requirements of Title 14, Code of Federal Regulations (14 CFR), 25.1419(e), (f), (g), and (h), Ice protection. Part 25 contains the airworthiness standards applicable to transport category airplanes a. Installing a primary ice detection system; b. Developing visual cues and installing an advisory ice detection system to alert the flightcrew that the airframe ice protection system (IPS) must be activated; c. Identifying conditions conducive to airframe icing through the use of temperature and visible moisture cues; and d. Including in the airplane flight manual (AFM) procedures for activating and deactivating the airframe IPS.
|25.1435-1||ANM-110||Hydraulic System Certification Tests and Analysis This advisory circular (AC) provides guidance material for use as an acceptable means, but not the only means, of demonstrating compliance with the airworthiness standards for transport category airplanes that contain hydraulic system requirements. It is not mandatory and does not constitute a regulation.||05-21-2001|
|25.1455-1||ANM-112||Waste Water/Potable Water Drain System Certification Testing Sets forth a specific method of compliance with the requirements of section 25.1455 of the FAR pertaining to draining of fluids through drain masts when the fluids are subject to freezing. This method is designed to verify that draining fluids will not accumulate as ice in sufficient quantity to be hazardous. Is for guidance purposes and to set forth one method of compliance that has been found acceptable.||03-11-1985|
|25.1457-1A||ANM-110A||Cockpit Voice Recorder Installations Sets forth one acceptable means of compliance with provisions of FAR 25.1457 (b), (e), and (f) pertaining to area microphones, cockpit voice recorder location, and erasure features.||11-03-1969|
|25.1523-1||ANM-111||Minimum Flightcrew Sets forth a method of compliance with the requirements of Section 25.1523 of the FAR, which contains the certification requirements for minimum flight crew on transport category airplanes.||02-02-1993|
|25.1529-1A||ANM-100||Instructions for Continued airworthiness of Structural Repairs on Transport Airplanes Provides instructions to ensure continued airworthiness of structural repairs on transport category airplanes. It addresses the approval procedures to follow when making structural repairs to structure certificated under the damage tolerance requirements of Section 25.571 of FAR, Amendment 25-45, and to type designs with Supplemental Inspection Documents, which were based on these criteria.||11-20-2007|
Airplane Flight Manual
Identifies the information that must be provided in Airplane Flight Manual (AFM) under the airworthiness regulations and provides guidance as to the form and content of the approved portion of an AFM.
|25.1701-1||ANM-100||Certification of Electrical Wiring Interconnection Systems on Transport Category Airplanes This Advisory Circular (AC) provides guidance for certification of electrical wiring interconnection systems (EWIS) on transport category airplanes in accordance with 14 CFR part 25, subpart H, sections §§25.1701 through 25.1739 and sections H25.4 and H25.5 of Appendix H to part 25.||12-04-2007|
|25.253-1A||ANM-110A||High-Speed Characteristics Sets forth an acceptable means, but not the only means, by which compliance may be shown with FAR 25.253 during certification flight tests.||12-27-1976|
|25.335-1A||ANM-110||Design Dive Speed Sets forth an acceptable means , but not the only means, of demonstrating compliance with the provisions of part 25 of the Federal Aviation Regulations (FAR) related to the minimum speed margin between design cruise speed and design dive speed for transport category airplanes.||09-29-2000|
|25.491-1||ANM-110||Taxi, Takeoff and Landing Roll Design Loads Sets forth acceptable methods of compliance with provisions of Part 25 of the FAR dealing with the certification requirements for taxi, takeoff, and landing roll design loads. Guidance information is provided for showing compliance with section 25.491 of the FAR relating to structural design for airplane operation on paved runways and taxiways normally used in commercial operations.||10-20-2000|
Dynamic Evaluation of Seat Restraint Systems and Occupant Protection on Transport Airplanes / with Change 1
This advisory circular (AC) provides information and guidance regarding acceptable means of compliance with the requirements of 14 CFR part 25 applicable to dynamic testing of seats. The AC provides background and discussion of the reasoning behind the test procedures. It also describes the test facilities and equipment necessary to conduct the tests.
Damage Tolerance and Fatigue Evaluation of Structure
This advisory circular (AC) provides guidanc~ for compliance with the provisions of Title 14, Code of Federal Regulations (14 CFR) part 25, pertaining to the requirements for damage-tolerance and fatigue evaluation oftransport category aircraft structurce, including evaluation of widespread fatigue dam, age (VlFD) and establishing a limit of validity of the engineering data that supports the structural-maintenance program (hereafter referred to as the LOV).
|25.613-1||ANM-115||Material Strength Properties and Material Design Values||08-06-2003|
Aeroelastic Stability Substantiation of Transport Category Airplanes
This advisory circular (AC) provides guidance material for acceptable means, but not the only means, of demonstrating compliance with the provisions of Title 14, Code of Federal Regulations part 25 associated with the design requirements for transport category airplanes to preclude the aeroelastic instabilities offlutter, divergence, and control reversal. The precise details for analytical procedures and testing techniques are beyond the scope of this AC. However, some general information is included, with supporting discussions, for consideration when demonstrating compliance with§ 25.629 and related regulations. Revision B incorporates changes only to the portions of this AC affected by the Airplane and Engine Certification Requirements in Supercooled Large Drop, Mixed Phase, and Ice Crystal Icing Conditions final ru
|25.672-1||ANM-110B||Active Flight Controls Sets forth an equivalent means of complying with the provisions of Part 25 of the Federal Aviation Regulations (FAR) pertaining to the certification requirements of active flight controls. The procedures set forth herein apply to load alleviation systems (SAS), and flutter suppression systems (FSS). These procedures provide compliance with Part 25 under the equivalent safety provisions of Section 21.21(b)(1) in addition to compliance with the applicable sections of Part 25.||11-15-1983|
|25.703-1||ANM-111||Takeoff Configuration Warning Systems Provides guidance for the certification of takeoff configuration warning systems installed in transport category airplanes.||03-17-1993|
|25.723-1||ANM-110||Shock Absorption Tests This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of part 25 of the Federal Aviation Regulations (FAR) related to the use of landing gear shock absorption tests and analyses to determine landing loads for transport category airplanes.||05-25-2001|