« Back to Advisory Circulars main page

Will search within "Airworthiness Standards: Transport Category Airplanes" only. Search all ACs.

26 - 50 of 77 results.

Export to MS Excel

Search results
Number Office Title Date
25-15 ANM-111 Approval of Flight Management Systems in Transport Category Airplanes This advisory circular (AC) provides guidance material for the airworthiness approval of flight management systems (FMS) in transport category airplanes. Like all AC material, this AC is not mandatory and does not constitute a regulation. It is issued for guidance purposes and to outline a method of compliance with the rules. In lieu of following this method without deviation, the applicant may elect to follow an alternate method, provided the alternate method is also found by the Federal Aviation Administration (FAA) to be an acceptable means of complying with the requirements of Part 25. Because the method of compliance presented in this AC is not mandatory, the terms "shall" and "must" used herein apply only to an applicant who chooses to follow this particular method without deviation. 11-20-1989
25-16 ANM-111 Electrical Fault and Fire Prevention and Protection This advisory circular (AC) provides information on electrically caused faults, overheat, smoke, and fire in transport category airplanes. Acceptable means are provided to minimize the potential for these conditions to occur, and to minimize or contain their effects when they do occur.  These means are not mandatory.  An applicant may elect to use any other means found to be acceptable by the Federal Aviation Administration for compliance with the Federal Aviation Regulations (FAR). 09-25-1987
25-20 ANM-111 Pressurization, Ventilation and Oxygen Systems Assessment for Subsonic Flight including High Altitude Operation Provides guidance on methods of compliance with the requirements of part 25 of the Federal Aviation Regulations pertaining to pressurization, ventilation, and oxygen systems, especially as they pertain to high altitude subsonic flight. As with all AC material, it is not mandatory and does not constitute a regulation. The applicant may elect to follow alternate methods provided that these methods are also found by the FAA to be an acceptable means of complying with the requirements of part 25. Because the guidance on the methods of compliance presented in this AC are not mandatory, the terms "shall" and "must" when used herein, apply only to an applicant that chooses to follow a particular method without deviation. 09-10-1996
25.1302-1 ANM-111 Installed Systems and Equipment for Use by the Flightcrew

This advisory circular (AC) provides guidance for the design and methods of compliance for installed equipment on transport airplanes intended for use by the flightcrew. The guidance provided by this AC is intended to minimize the occurrence of design-related errors by the flightcrew and to enable the flightcrew to detect and manage errors that do occur. This AC provides recommendations for the design and evaluation of controls, displays, system behavior, and system integration that are all part of human factors considerations.

AH Bahrami

05-03-2013
25.1523-1 ANM-111 Minimum Flightcrew Sets forth a method of compliance with the requirements of Section 25.1523 of the FAR, which contains the certification requirements for minimum flight crew on transport category airplanes. 02-02-1993
25.703-1 ANM-111 Takeoff Configuration Warning Systems Provides guidance for the certification of takeoff configuration warning systems installed in transport category airplanes. 03-17-1993
25.773-1 ANM-111 Pilot Compartment View Design Considerations Provides guidance for demonstrating compliance with the airworthiness standards for transport category airplanes pertaining to pilot compartment view. These criteria include the properties of transport materials necessary to assure adequate visibility from the flight deck. 01-08-1993
25.672-1 ANM-110B Active Flight Controls Sets forth an equivalent means of complying with the provisions of Part 25 of the Federal Aviation Regulations (FAR) pertaining to the certification requirements of active flight controls. The procedures set forth herein apply to load alleviation systems (SAS), and flutter suppression systems (FSS). These procedures provide compliance with Part 25 under the equivalent safety provisions of Section 21.21(b)(1) in addition to compliance with the applicable sections of Part 25. 11-15-1983
25.1457-1A ANM-110A Cockpit Voice Recorder Installations Sets forth one acceptable means of compliance with provisions of FAR 25.1457 (b), (e), and (f) pertaining to area microphones, cockpit voice recorder location, and erasure features. 11-03-1969
25.253-1A ANM-110A High-Speed Characteristics Sets forth an acceptable means, but not the only means, by which compliance may be shown with FAR 25.253 during certification flight tests. 12-27-1976
25-7C ANM-110 Flight Test Guide For Certification Of Transport Category Airplanes

This advisory circular (AC) provides guidance for the flight test evaluation of transport category airplanes. This AC includes flight test methods and procedures to show compliance with the regulations contained in subpart B of Title 14, Code of Federal Regulations (14 CFR) part 25, which address airplane performance and handling characteristics. This revision, AC 25-7C, is a complete revision to reduce the number of differences from the European Aviation Safety Agency’s Flight Test Guide, provide acceptable means of compliance for the regulatory changes associated with amendments 107, 109, 113, 115, 119, and 123 to part 25, respond to National Transportation Safety Board recommendations, and to provide a general update to reflect current FAA and industry practices and policies.

10-16-2012
25-12 ANM-110 Airworthiness Criteria for the Approval of Airborne Windshear Warning Systems in Transport Category This advisory circular (AC) provides guidance for the airworthiness approval of airborne windshear warning systems in transport category airplanes. Like all advisory circular material, this advisory circular is not, in itself, mandatory and does not constitute a regulation. It is issued for guidance purposes and to outline a method of compliance with the rules. In lieu of following this method without deviation, the applicant may elect to follow an alternate method, provided the alternate method is also found by the Federal Aviation Administration (FAA) to be an acceptable means of complying with the requirements of Part 25 of the Federal Aviation Regulations (FAR). Because the method of compliance presented in this AC is not mandatory, the terms "shall" and "must" used in this AC apply only to an applicant who chooses to follow this particular method without deviation. 11-02-1987
25-21 ANM-110 Certification of Transport Airplane Structure Provides guidance to airplane manufacturers, modifiers, foreign regulatory authorities, and FAA transport airplane type certification engineers and their designees. 09-01-1999
25-25A ANM-110 Performance and Handling Characteristics in Icing Conditions

This advisory circular describes an acceptable means of showing compliance with the airplane performance and handling characteristics certification requirements for flight in the icing conditions defined in Appendices C and 0 of Title 14, Code of Federal Regulations part 25.

10-27-2014
25-28 ANM-110 Compliance of Transport Category Airplanes with Certification Requirements for Flight in Icing Conditions

This advisory circular (AC) describes an acceptable means of showing compliance with the supercooled large drop condition requirements of § 25.773, Pilot compartment view, § 25.1323, Airspeed indicating system, § 25.1324 Angle of attack system and § 25.1325, Static pressure system, as well as the requirements of § 25.1419, Ice protection, and § 25.1420, Supercooled large drop icing conditions, of Title 14, Code of Federal Regulations (14 CFR) part 25.  Part 25 contains the certification requirements for transport category airplanes.  The compliance means described in this document are intended as guidance.  They are meant to supplement the engineering judgment that must form the basis of any compliance findings for the supercooled large drop icing conditions in §§ 25.773, 25.1323, 25.1324, and 25.1325, as well as the compliance findings for §§ 25.1419 and 25.1420.

10-27-2014
25-869.1A ANM-110 Fire Protection Systems 10-22-2007
25.1329-1C ANM-110 Approval of Flight Guidance Systems

This advisory circular (AC) describes an acceptable means for showing compliance with certain requirements of Title 14, Code of Federal Regulations (CFR) 25.1329, Flight guidance systems.  While part 25 contains the airworthiness standards applicable to transport category airplanes, the guidance in this AC pertains to the functions of autopilots, flight directors, and automatic thrust control as well as any interactions with stability augmentation and trim functions. This revision incorporates minor changes associated with issuance of the final rule for Airplane and Engine Certification Requirements in Supercooled Large Drop, Mixed Phase, and Ice Crystal Icing Conditions.

10-27-2014
25.1419-2 ANM-110 Compliance with the Ice Protection Requirements of §§ 25.1419(e), (f), (g), and (h)

This advisory circular (AC) describes an acceptable means for showing compliance with the requirements of Title 14, Code of Federal Regulations (14 CFR), 25.1419(e), (f), (g), and (h), Ice protection. Part 25 contains the airworthiness standards applicable to transport category airplanes a. Installing a primary ice detection system; b. Developing visual cues and installing an advisory ice detection system to alert the flightcrew that the airframe ice protection system (IPS) must be activated; c. Identifying conditions conducive to airframe icing through the use of temperature and visible moisture cues; and d. Including in the airplane flight manual (AFM) procedures for activating and deactivating the airframe IPS.

10-27-2009
25.1435-1 ANM-110 Hydraulic System Certification Tests and Analysis This advisory circular (AC) provides guidance material for use as an acceptable means, but not the only means, of demonstrating compliance with the airworthiness standards for transport category airplanes that contain hydraulic system requirements. It is not mandatory and does not constitute a regulation. 05-21-2001
25.1581-1 ANM-110 Airplane Flight Manual

Identifies the information that must be provided in Airplane Flight Manual (AFM) under the airworthiness regulations and provides guidance as to the form and content of the approved portion of an AFM.

07-14-1997
25.335-1A ANM-110 Design Dive Speed Sets forth an acceptable means , but not the only means, of demonstrating compliance with the provisions of part 25 of the Federal Aviation Regulations (FAR) related to the minimum speed margin between design cruise speed and design dive speed for transport category airplanes. 09-29-2000
25.491-1 ANM-110 Taxi, Takeoff and Landing Roll Design Loads Sets forth acceptable methods of compliance with provisions of Part 25 of the FAR dealing with the certification requirements for taxi, takeoff, and landing roll design loads. Guidance information is provided for showing compliance with section 25.491 of the FAR relating to structural design for airplane operation on paved runways and taxiways normally used in commercial operations. 10-20-2000
25.562-1B ANM-110 Dynamic Evaluation of Seat Restraint Systems and Occupant Protection on Transport Airplanes Provides information and guidance regarding compliance with the provisions of Part 25 of the Federal Aviation Regulations applicable to dynamic testing of seats intended for use in transport category airplanes. 01-10-2006
25.723-1 ANM-110 Shock Absorption Tests This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of part 25 of the Federal Aviation Regulations (FAR) related to the use of landing gear shock absorption tests and analyses to determine landing loads for transport category airplanes. 05-25-2001
25.775-1 ANM-110 Windows and Windshields Sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of Title 14, Code of Federal Regulations (14 CFR) part 25 pertaining to the certification requirements for windshields, windows, and mounting structure. Guidance information is provided for showing compliance with § 25.775(d), relating to structural design of windshields and windows for airplanes with pressurized cabins. Terms used in this AC, such as “shall” or “must,” are used only in the sense of ensuring applicability of this particular method of compliance when the acceptable method of compliance described herein is used. Other methods of compliance with the requirements may be acceptable. While these guidelines are not mandatory, they are derived from extensive Federal Aviation Administration (FAA) and industry experience in determining compliance with 14 CFR. This AC does not change, create any additional, authorize changes in, or permit deviations from, regulatory requirements. 01-17-2003

26 - 50 of 77 results.

Export to MS Excel