« Back to Advisory Circulars main page

Will search within "Airworthiness Standards: Transport Category Airplanes" only. Search all ACs.

26 - 50 of 81 results.

Export to MS Excel

Search results
Number Office Title Date
25.795-8 ANM-100 Interior Design to Facillitate Searches This advisory circular (AC) describes an acceptable means for showing compliance with the requirements of Title 14, Code of Federal Regulations (14 CFR), part 25, § 25.795(c)(3), “Interior design to facilitate searches.” This section requires that the interior design of an airplane incorporate features that will make it more difficult to hide dangerous objects in the airplane or make it easier to find them if they have been brought onboard. The means of compliance described in this document provides guidance to supplement the engineering and operational judgment that must form the basis of any compliance findings relative to whether the interior design deters concealment of dangerous objects (e.g., weapons or explosives) and facilitates a search for them in certain areas of the airplane. The requirements for searching an airplane are not affected by the requirements of § 25.795(c)(3). The design of the airplane will make it easier to search for hidden objects but will not affect the need for, or the diligence of, the search. 10-24-2008
25.981-1C ANM-112 Fuel Tank Ignition Source Prevention Guidelines This advisory circular provides guidance for demonstrating compliance with the certification requirements for prevention of ignition sources within the fuel tanks of transport category airplanes. This guidance is applicable to transport category airplanes for which a new, amended, or supplemental type certificate is requested. 09-19-2008
25.981-2A ANM-112 Fuel Tank Flammability This advisory circular (AC) provides information and guidance on compliance with the airworthiness standards for transport category airplanes about limiting the time a fuel tank may be flammable or mitigation of hazards from flammable fuel air mixtures within fuel tanks. This guidance is applicable to transport category airplanes for which a new, amended, or supplemental type certificate is requested, and for which Amendment 25-125 applies. It is also applicable to certain existing design approval holders and certain pending applications for new type certificates, supplemental type certificates and amended type certificates where required by §§ 26.33, 26.35, 26.37, and 26.39, contained in a subpart D to Title 14, Code of Federal Regulations (CFR) part 26, “Fuel Tank Flammability.” Guidance on compliance with the associated requirements for operators of affected airplanes that must comply with requirements in 14 CFR parts 121, 125 and 129, to incorporate flammability reduction or ignition mitigation means by specified dates, will be contained in a separate document. 09-19-2008
25.856-2A ANM-115 Installation of Thermal/Acoustic Insulation for Burnthrough Protection

This AC provides guidance for the test method to determine burnthrough resistance of thermal/acoustic insulation materials installed in transport category airplanes. This guidance applies to airplanes required to comply with § 25.856 and part VII of Appendix F to 14 CFR part 25.

07-29-2008
25.1701-1 ANM-100 Certification of Electrical Wiring Interconnection Systems on Transport Category Airplanes This Advisory Circular (AC) provides guidance for certification of electrical wiring interconnection systems (EWIS) on transport category airplanes in accordance with 14 CFR part 25, subpart H, sections §§25.1701 through 25.1739 and sections H25.4 and H25.5 of Appendix H to part 25. 12-04-2007
25.1365-1 ANM-100 Electrical Appliances, Motors, and Transformers This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1365 Electrical appliances, motors, and transformers. 11-27-2007
25.1529-1A ANM-100 Instructions for Continued airworthiness of Structural Repairs on Transport Airplanes Provides instructions to ensure continued airworthiness of structural repairs on transport category airplanes. It addresses the approval procedures to follow when making structural repairs to structure certificated under the damage tolerance requirements of Section 25.571 of FAR, Amendment 25-45, and to type designs with Supplemental Inspection Documents, which were based on these criteria. 11-20-2007
25-26 ANM-100 Development of standard wiring practices documentation 11-14-2007
25-869.1A ANM-110 Fire Protection Systems 10-22-2007
25.1353-1A ANM-100 Electrical equipment and installations 10-22-2007
25.1357-1A ANM-100 Circuit protective devices 10-22-2007
25.1360-1 ANM-100 Protection Against Injury This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1360 Precautions against injury 10-22-2007
25.1362-1 ANM-100 Electrical Supplies for Emergency Conditions This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1362, Electrical supplies for emergency conditions. 10-22-2007
25.869-1A ANM-100 Fire Protection Systems 10-22-2007
25.899-1 ANM-100 Electrical bonding and protection against static electricity This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.899 Electrical bonding and protection against static electricity 10-22-2007
25.562-1B ANM-110 Dynamic Evaluation of Seat Restraint Systems and Occupant Protection on Transport Airplanes / with Change 1

This advisory circular (AC) provides information and guidance regarding acceptable means of compliance with the requirements of 14 CFR part 25 applicable to dynamic testing of seats. The AC provides background and discussion of the reasoning behind the test procedures. It also describes the test facilities and equipment necessary to conduct the tests.

01-10-2006
25.856-1 ANM-115 Thermal/Acoustic Insulation Flame Propagation Test Method Details Guidance applies to airplanes required to conform with 25.856, and part VI of appendix F to Title 14 Code of Federal Regulations (14 CFR) part 25. 06-24-2005
25.783-1A ANM-115 Fuselage Doors and Hatches Sets forth acceptable means of compliance with the provisions of Part 25 of the Federal Aviation Regulations (FAR) dealing with the certification requirements of fuselage doors. Guidance information is provided for showing compliance with structural and functional safety standards for doors and their operating systems. The intent of the requirements and some acceptable means of compliance are discussed. Other means are acceptable if they meet the intent of the regulations. For the propose of showing compliance with section 25.783 of FAR, hatches and exits are also considered to be doors. 04-25-2005
25.1419-1A ANM-112 Certification of Transport Category Airplanes for Flight in Icing Conditions Provides guidance for certification of airframe ice protection systems on transport category airplanes. 05-07-2004
25.613-1 ANM-115 Material Strength Properties and Material Design Values 08-06-2003
25.775-1 ANM-110 Windows and Windshields Sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of Title 14, Code of Federal Regulations (14 CFR) part 25 pertaining to the certification requirements for windshields, windows, and mounting structure. Guidance information is provided for showing compliance with § 25.775(d), relating to structural design of windshields and windows for airplanes with pressurized cabins. Terms used in this AC, such as “shall” or “must,” are used only in the sense of ensuring applicability of this particular method of compliance when the acceptable method of compliance described herein is used. Other methods of compliance with the requirements may be acceptable. While these guidelines are not mandatory, they are derived from extensive Federal Aviation Administration (FAA) and industry experience in determining compliance with 14 CFR. This AC does not change, create any additional, authorize changes in, or permit deviations from, regulatory requirements. 01-17-2003
25.735-1 ANM-100 Brakes and Braking Systems Certification Tests and Analysis Describes an acceptable means for obtaining FAA airworthiness approval concerning new or revised requirements for braking systems, and associated test conditions for braking systems, installed in transport category airplanes. 04-10-2002
25.723-1 ANM-110 Shock Absorption Tests This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of part 25 of the Federal Aviation Regulations (FAR) related to the use of landing gear shock absorption tests and analyses to determine landing loads for transport category airplanes. 05-25-2001
25.1435-1 ANM-110 Hydraulic System Certification Tests and Analysis This advisory circular (AC) provides guidance material for use as an acceptable means, but not the only means, of demonstrating compliance with the airworthiness standards for transport category airplanes that contain hydraulic system requirements. It is not mandatory and does not constitute a regulation. 05-21-2001
25.491-1 ANM-110 Taxi, Takeoff and Landing Roll Design Loads Sets forth acceptable methods of compliance with provisions of Part 25 of the FAR dealing with the certification requirements for taxi, takeoff, and landing roll design loads. Guidance information is provided for showing compliance with section 25.491 of the FAR relating to structural design for airplane operation on paved runways and taxiways normally used in commercial operations. 10-20-2000

26 - 50 of 81 results.

Export to MS Excel