« Back to Advisory Circulars main page

Will search within "Airworthiness Standards: Transport Category Airplanes" only. Search all ACs.

26 - 50 of 77 results.

Export to MS Excel

Search results
Number Office Title Date
25.1365-1 ANM-100 Electrical Appliances, Motors, and Transformers This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1365 Electrical appliances, motors, and transformers. 11-27-2007
25-16 ANM-111 Electrical Fault and Fire Prevention and Protection This advisory circular (AC) provides information on electrically caused faults, overheat, smoke, and fire in transport category airplanes. Acceptable means are provided to minimize the potential for these conditions to occur, and to minimize or contain their effects when they do occur.  These means are not mandatory.  An applicant may elect to use any other means found to be acceptable by the Federal Aviation Administration for compliance with the Federal Aviation Regulations (FAR). 09-25-1987
25.1362-1 ANM-100 Electrical Supplies for Emergency Conditions This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1362, Electrical supplies for emergency conditions. 10-22-2007
25.899-1 ANM-100 Electrical bonding and protection against static electricity This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.899 Electrical bonding and protection against static electricity 10-22-2007
25.1353-1A ANM-100 Electrical equipment and installations 10-22-2007
25-11B ANM-111 Electronic Flight Displays

This advisory circular (AC) provides guidance for showing compliance with certain requirements of Title 14, Code of Federal Regulations part 25 for the design, installation, integration, and approval of electronic flight deck displays, components, and systems installed in transport category airplanes. Revision B adds appendices F and G to the original AC and updates references to related rules and documents.

10-07-2014
25.803-1A ANM-115 Emergency Evacuation Demonstrations

This advisory circular (AC) provides guidance on means, but not the only means, of compliance with Title 14, Code of Federal Regulations (14 CFR) part 25 concerning:  (1) conduct of full?scale emergency evacuation demonstrations, and (2) use of analysis and tests in lieu of conducting an actual demonstration.  Throughout this AC, any reference to a full-scale demonstration, unless further qualified, means an evacuation demonstration in which a full complement of passengers and the requisite number of crewmembers evacuate an airplane using assist means, if installed, under the conditions specified in part 25, appendix J.  References to “appendix J” means 14 CFR part 25, appendix J.  Additionally, any reference to an analysis, which is to be used to satisfy the emergency evacuation requirements of part 25, means a formal analysis document supported by data from tests or demonstrations.  Terms such as “shall” and “must” are used only in the sense of ensuring applicability of this particular means of compliance when the acceptable means of compliance described herein is used.

03-12-2012
25.939-1 ANM-112 Evaluating Turbine Engine Operating Characteristics Provides guidelines for the evaluation of turbine engine (turbojet, turboprop, and turboshaft) operating characteristics for subsonic transport category airplanes. 03-19-1986
25-869.1A ANM-110 Fire Protection Systems 10-22-2007
25.869-1A ANM-100 Fire Protection Systems 10-22-2007
25.853-1 ANM-110 Flammability Requirements for Aircraft Seat Cushions Provides guidance material for demonstrating compliance with the Federal Aviation Regulations (FAR) pertaining to flammability of aircraft seat cushions. 09-17-1986
25.795-2A ANM-100 Flight Deck Penetration Resistance This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of the airworthiness standards for transport category airplanes related to the airplane design for flightdeck penetration resistance. 10-24-2008
25-7C ANM-110 Flight Test Guide For Certification Of Transport Category Airplanes

This advisory circular (AC) provides guidance for the flight test evaluation of transport category airplanes. This AC includes flight test methods and procedures to show compliance with the regulations contained in subpart B of Title 14, Code of Federal Regulations (14 CFR) part 25, which address airplane performance and handling characteristics. This revision, AC 25-7C, is a complete revision to reduce the number of differences from the European Aviation Safety Agency’s Flight Test Guide, provide acceptable means of compliance for the regulatory changes associated with amendments 107, 109, 113, 115, 119, and 123 to part 25, respond to National Transportation Safety Board recommendations, and to provide a general update to reflect current FAA and industry practices and policies.

10-16-2012
25.795-1A ANM-100 FlightDeck Intrusion Resistance This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of the airworthiness standards for transport category airplanes related to the airplane design for flightdeck (also referred to as the pilot compartment or cockpit) intrusion resistance. Intrusion resistance, in the context of this AC, refers to the ability to resist forced entry by a person who is not authorized by the pilot in command to enter the flightdeck. Intrusion resistance also includes the ability to resist attempts to enter the flightdeck through use of simple tools, such as pocket knives, nail files, or keys. 10-24-2008
25.1322-1 ANM-100 Flightcrew Alerting

This Advisory Circular (AC) provides guidance for showing compliance with certain requirements of Title 14 of the Code of Federal Regulations (14 CFR), part 25, for the design approval of flightcrew-alerting functions

12-13-2010
25.795-3 ANM-100 Flightdeck Protection (Smoke and Fumes) This advisory circular (AC) describes an acceptable means of showing compliance with the requirements of Title 14, Code of Federal Regulations (14 CFR), part 25, § 25.795(b)(1), “Flight deck protection.” This section requires that an airplane be designed to limit the entry of smoke, fumes, and noxious gases into the flightdeck in the event of detonation of an explosive or incendiary device on the airplane. The means of compliance described in this document provides guidance to supplement the engineering and operational judgment that must form the basis of any compliance findings relative to penetration into the flightdeck of smoke, fumes, and noxious gases generated by explosions or fires elsewhere on the airplane. 10-24-2008
25.812-1A ANM-114 Floor Proximity Emergency Escape Path Marking Provides guidance material for use in demonstrating compliance with the provisions of Part 25 of the FAR requiring floor proximity emergency escape path markings. 05-22-1989
25.812-2 ANM-114 Floor Proximity Emergency Escape Path Marking Systems Incorporating Photoluminescent Elements Provides guidance for use in demonstrating compliance with the provisions of part 25 of the Federal Aviation Regulations (FAR) regarding floor proximity emergency escape path marking systems (FPEEPMS), which incorporate photo luminescent elements. Although mandatory terms such as “shall” or “must” are used in this AC, because the AC method of compliance is not itself mandatory, these terms apply only to applicants who seek to demonstrate compliance by use of the specific method described by this AC. 07-24-1997
25.963-1 ANM-112 Fuel Tank Access Covers Sets forth a means of compliance with the provisions of Part 25 of the FAR dealing with the certification requirements for fuel tank access covers on turbine powered transport category airplanes. Guidance information is provided for showing compliance with the impact and fire resistance requirements of Section 25.963(e). 07-29-1992
25.981-2A ANM-112 Fuel Tank Flammability This advisory circular (AC) provides information and guidance on compliance with the airworthiness standards for transport category airplanes about limiting the time a fuel tank may be flammable or mitigation of hazards from flammable fuel air mixtures within fuel tanks. This guidance is applicable to transport category airplanes for which a new, amended, or supplemental type certificate is requested, and for which Amendment 25-125 applies. It is also applicable to certain existing design approval holders and certain pending applications for new type certificates, supplemental type certificates and amended type certificates where required by §§ 26.33, 26.35, 26.37, and 26.39, contained in a subpart D to Title 14, Code of Federal Regulations (CFR) part 26, “Fuel Tank Flammability.” Guidance on compliance with the associated requirements for operators of affected airplanes that must comply with requirements in 14 CFR parts 121, 125 and 129, to incorporate flammability reduction or ignition mitigation means by specified dates, will be contained in a separate document. 09-19-2008
25.981-1C ANM-112 Fuel Tank Ignition Source Prevention Guidelines This advisory circular provides guidance for demonstrating compliance with the certification requirements for prevention of ignition sources within the fuel tanks of transport category airplanes. This guidance is applicable to transport category airplanes for which a new, amended, or supplemental type certificate is requested. 09-19-2008
25.783-1A ANM-115 Fuselage Doors and Hatches Sets forth acceptable means of compliance with the provisions of Part 25 of the Federal Aviation Regulations (FAR) dealing with the certification requirements of fuselage doors. Guidance information is provided for showing compliance with structural and functional safety standards for doors and their operating systems. The intent of the requirements and some acceptable means of compliance are discussed. Other means are acceptable if they meet the intent of the regulations. For the propose of showing compliance with section 25.783 of FAR, hatches and exits are also considered to be doors. 04-25-2005
25.253-1A ANM-110A High-Speed Characteristics Sets forth an acceptable means, but not the only means, by which compliance may be shown with FAR 25.253 during certification flight tests. 12-27-1976
25.1435-1 ANM-110 Hydraulic System Certification Tests and Analysis This advisory circular (AC) provides guidance material for use as an acceptable means, but not the only means, of demonstrating compliance with the airworthiness standards for transport category airplanes that contain hydraulic system requirements. It is not mandatory and does not constitute a regulation. 05-21-2001
25-5 AIR-120 Installation Approval on Transport Category Airplanes of Cargo Unit Load Devices Approved as Meeting the Criteria in NAS 3610 Sets forth an acceptable means, but not the sole means, of complying with the requirements of the Federal Aviation Regulations (FAR’s) applicable to the installation on transport category airplanes of cargo load devices approved as meeting the criteria in NAS 3610. 06-03-1970

26 - 50 of 77 results.

Export to MS Excel