« Back to Advisory Circulars main page

Will search within "Airworthiness Standards: Transport Category Airplanes" only. Search all ACs.

51 - 75 of 82 results.

Export to MS Excel

Search results
Number Office Title Date
25.335-1A ANM-110 Design Dive Speed Sets forth an acceptable means , but not the only means, of demonstrating compliance with the provisions of part 25 of the Federal Aviation Regulations (FAR) related to the minimum speed margin between design cruise speed and design dive speed for transport category airplanes. 09-29-2000
25.491-1 ANM-110 Taxi, Takeoff and Landing Roll Design Loads Sets forth acceptable methods of compliance with provisions of Part 25 of the FAR dealing with the certification requirements for taxi, takeoff, and landing roll design loads. Guidance information is provided for showing compliance with section 25.491 of the FAR relating to structural design for airplane operation on paved runways and taxiways normally used in commercial operations. 10-20-2000
25.562-1B ANM-110 Dynamic Evaluation of Seat Restraint Systems and Occupant Protection on Transport Airplanes / with Change 1

This advisory circular (AC) provides information and guidance regarding acceptable means of compliance with the requirements of 14 CFR part 25 applicable to dynamic testing of seats. The AC provides background and discussion of the reasoning behind the test procedures. It also describes the test facilities and equipment necessary to conduct the tests.

01-10-2006
25.723-1 ANM-110 Shock Absorption Tests This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of part 25 of the Federal Aviation Regulations (FAR) related to the use of landing gear shock absorption tests and analyses to determine landing loads for transport category airplanes. 05-25-2001
25.775-1 ANM-110 Windows and Windshields Sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of Title 14, Code of Federal Regulations (14 CFR) part 25 pertaining to the certification requirements for windshields, windows, and mounting structure. Guidance information is provided for showing compliance with § 25.775(d), relating to structural design of windshields and windows for airplanes with pressurized cabins. Terms used in this AC, such as “shall” or “must,” are used only in the sense of ensuring applicability of this particular method of compliance when the acceptable method of compliance described herein is used. Other methods of compliance with the requirements may be acceptable. While these guidelines are not mandatory, they are derived from extensive Federal Aviation Administration (FAA) and industry experience in determining compliance with 14 CFR. This AC does not change, create any additional, authorize changes in, or permit deviations from, regulatory requirements. 01-17-2003
25.853-1 ANM-110 Flammability Requirements for Aircraft Seat Cushions Provides guidance material for demonstrating compliance with the Federal Aviation Regulations (FAR) pertaining to flammability of aircraft seat cushions. 09-17-1986
25.905-1 ANM-110 Minimizing the Hazards from Propeller Blade and Hub Failures Describes an acceptable means for showing compliance with the requirements of Section 25.905, “Propellers,” of Title 14, Code of Federal Regulations (CFR) Part 25. It provides guidance on design precautions to take to minimize the hazards that could occur to an airplane if a propeller blade fails or is released by a hub failure. The AC addresses the hazards associated with impact damage. 09-27-2000
25.994-1 ANM-110 Design Considerations to Protect Fuel Systems during a Wheels-Up Landing Presents guidelines and methods for complying with the requirements of section 25.994 of the Federal Aviation Regulations (FAR). These guidelines pertain to protecting fuel system components located in the engine nacelles and the fuselage from damage which could result in spillage of enough fuel to constitute a fire hazard as a consequence of a wheels-up landing on a paved runway. This material is not mandatory and does not constitute a regulation. 07-24-1986
25-17A ANM-100 Transport Airplane Cabin Interiors Crashworthiness Handbook

This Advisory Circular (AC) provides acceptable certification methods, but not necessarily the only acceptable methods, for demonstrating compliance with the crashworthiness requirements of part 25, as amended through Amendment 25-112, of Title 14 of the Code of Federal Regulations (14 CFR) for transport category airplanes. The guidance in this AC is not mandatory nor a regulation.

05-18-2009
25-24 ANM-100 Sustained Engine Imbalance Sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of 14 CFR Part 25 related to the aircraft design for sustained engine rotor imbalance conditions. While these guidelines are not mandatory, they are derived from extensive Federal Aviation Administration (FAA) and industry experience in determining compliance with the pertinent Federal Aviation Regulations (FAR). 08-02-2000
25-26 ANM-100 Development of standard wiring practices documentation 11-14-2007
25.1322-1 ANM-100 Flightcrew Alerting

This Advisory Circular (AC) provides guidance for showing compliance with certain requirements of Title 14 of the Code of Federal Regulations (14 CFR), part 25, for the design approval of flightcrew-alerting functions

12-13-2010
25.1353-1A ANM-100 Electrical equipment and installations 10-22-2007
25.1357-1A ANM-100 Circuit protective devices 10-22-2007
25.1360-1 ANM-100 Protection Against Injury This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1360 Precautions against injury 10-22-2007
25.1362-1 ANM-100 Electrical Supplies for Emergency Conditions This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1362, Electrical supplies for emergency conditions. 10-22-2007
25.1365-1 ANM-100 Electrical Appliances, Motors, and Transformers This advisory circular (AC) provides guidance for demonstrating compliance with the transport category airplane certification requirements of § 25.1365 Electrical appliances, motors, and transformers. 11-27-2007
25.1529-1A ANM-100 Instructions for Continued airworthiness of Structural Repairs on Transport Airplanes Provides instructions to ensure continued airworthiness of structural repairs on transport category airplanes. It addresses the approval procedures to follow when making structural repairs to structure certificated under the damage tolerance requirements of Section 25.571 of FAR, Amendment 25-45, and to type designs with Supplemental Inspection Documents, which were based on these criteria. 11-20-2007
25.1701-1 ANM-100 Certification of Electrical Wiring Interconnection Systems on Transport Category Airplanes This Advisory Circular (AC) provides guidance for certification of electrical wiring interconnection systems (EWIS) on transport category airplanes in accordance with 14 CFR part 25, subpart H, sections §§25.1701 through 25.1739 and sections H25.4 and H25.5 of Appendix H to part 25. 12-04-2007
25.735-1 ANM-100 Brakes and Braking Systems Certification Tests and Analysis Describes an acceptable means for obtaining FAA airworthiness approval concerning new or revised requirements for braking systems, and associated test conditions for braking systems, installed in transport category airplanes. 04-10-2002
25.795-1A ANM-100 FlightDeck Intrusion Resistance This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of the airworthiness standards for transport category airplanes related to the airplane design for flightdeck (also referred to as the pilot compartment or cockpit) intrusion resistance. Intrusion resistance, in the context of this AC, refers to the ability to resist forced entry by a person who is not authorized by the pilot in command to enter the flightdeck. Intrusion resistance also includes the ability to resist attempts to enter the flightdeck through use of simple tools, such as pocket knives, nail files, or keys. 10-24-2008
25.795-2A ANM-100 Flight Deck Penetration Resistance This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the provisions of the airworthiness standards for transport category airplanes related to the airplane design for flightdeck penetration resistance. 10-24-2008
25.795-3 ANM-100 Flightdeck Protection (Smoke and Fumes) This advisory circular (AC) describes an acceptable means of showing compliance with the requirements of Title 14, Code of Federal Regulations (14 CFR), part 25, § 25.795(b)(1), “Flight deck protection.” This section requires that an airplane be designed to limit the entry of smoke, fumes, and noxious gases into the flightdeck in the event of detonation of an explosive or incendiary device on the airplane. The means of compliance described in this document provides guidance to supplement the engineering and operational judgment that must form the basis of any compliance findings relative to penetration into the flightdeck of smoke, fumes, and noxious gases generated by explosions or fires elsewhere on the airplane. 10-24-2008
25.795-4 ANM-100 Passenger Cabin Smoke Protection This Advisory Circular (AC) provides an acceptable means of showing compliance with the requirements of Title 14, Code of Federal Regulations (CFR), part 25, § 25.795(b)(2), “Cabin smoke protection.” This section requires that an airplane be designed with means to prevent passengers from being incapacitated by smoke, fumes, and noxious gases that result from detonation of an explosive or incendiary device during flight. The means of compliance described in this document provides guidance to supplement the engineering and operational judgment that must form the basis of any compliance findings relative to penetration of smoke, fumes, and noxious gases into the passenger cabin. 10-24-2008
25.795-5 ANM-100 Cargo Compartment Fire Suppression This advisory circular (AC) describes an acceptable means for showing compliance with the requirements of Title 14, Code of Federal Regulations (14 CFR), part 25, § 25.795(b)(3), “Cargo compartment fire suppression.” This section requires that the fire suppression system for the cargo compartment be designed to withstand a sudden and extensive explosion and fire, such as could be caused by an explosive or incendiary device. The means of compliance described in this document provides guidance to supplement the engineering and operational judgment that must form the basis of any compliance findings relative to the design of fire suppression systems for the cargo compartment. 10-24-2008

51 - 75 of 82 results.

Export to MS Excel