Back to Advisory Circulars Main Page

Will search within "Airports" only. Search all ACs.

1 - 25 of 122 results.
First Previous [1] 2 3 4 5 Next Last
Number Office Title Date
150/5340-1L AAS-100 Standards for Airport Markings

This AC contains the FAA standards for markings used on airport runways, taxiways, and aprons.

09-27-2013
150/5345-27E AAS-100 Specification for Wind Cone Assemblies

This AC contains a specification for wind cone assemblies to be used to provide wind information to pilots. This revision revises the equipment qualification requirements to be furnished under the Federal grant assistance program for airports, applies photometric requirements for internally lighted wind cones to both Size 1 and Size 2 windsocks, and makes editorial changes.

09-26-2013
150/5360-12F AAS-100 Airport Signing and Graphics

This AC provides guidance on airport terminal and landside wayfinding, signing, and graphics. It focuses on four areas of the airport: roadways, parking, curbside and ground transportation, and terminal. This version is a substantial rewrite and incorporates the recommendations and guidelines developed under Airport Cooperative Research Program (ACRP) Report 52, Wayfinding and Signing Guidelines for Airport Terminals and Landside, completed in 2011.

09-26-2013
150/5340-5D AAS-100 Segmented Circle Airport Marker System

This AC provides standards for a system of airport marking consisting of certain pilot aids and traffic control devices.

09-25-2013
150/5345-7F AAS-100 Specification for L-824 Underground Electrical Cable for Airport Lighting Circuits

This AC provides specifications for L-824 underground electrical cable for airport lighting circuits.

08-19-2013
150/5320-5D AAS-100 Airport Drainage Design

This AC provides guidance for engineers, airport managers, and the public about the design and construction of airport surface storm drainage systems; and subsurface drainage systems for paved runways, taxiways, and aprons. It incorporates the DOD Unified Facilities Criteria (UFC) draft document, Surface Drainage Design, dated August 1, 2006. This revision adds guidance that was not included in the original DOD document. See paragraph 5,, "Purpose of this Revision."

08-15-2013
150/5300-14C AAS-100 Design of Aircraft Deicing Facilities

This AC provides standards and recommendations for use in the design of aircraft deicing facilities.

08-07-2013
150/5395-1A AAS-100 Seaplane Bases

This AC provides guidance to assist operators in planning, designing, and constructing seaplane bases and associated facilities.

08-06-2013
150/5000-15B AAS-100 Announcement of Availability of Airport-Related Research and Development Products

This AC explains how to obtain the latest airport-related research and development (R&D) products funded by the Federal Aviation Administration’s (FAA’s) Airports Organization, particularly the FAA’s Airport Technology Research and Development Branch, the Airport Cooperative Research Program (ACRP), the Innovative Pavement Research Foundation (IPRF), and the Airfield Asphalt Pavement Technology Program (AAPTP).
 

07-23-2013
150/5200-32B AAS-300 Reporting Wildlife Aircraft Strikes

This AC explains the importance of reporting collisions between aircraft and wildlife, more commonly referred to as wildlife strikes. It also explains recent improvements in the FAA’s Bird/Other Wildlife Strike Reporting system, how to report a wildlife strike, what happens to the wildlife strike report data, how to access the FAA National Wildlife Strike Database (NWSD), and the FAA’s Feather Identification program.

05-31-2013
150/5345-42G AAS-100 Specification for Airport Light Bases, Transformer Housings, Junction Boxes, and Accessories

This AC contains the specifications for airport light bases, transformer housings, junction boxes, and accessories. This AC is not intended to be a compilation of currently available product designs. It provides the basic standard requirements for critical dimensions and performance requirements to which all manufacturers must demonstrate compliance.

01-23-2013
150/5210-25 AAS-100 Performance Specification for Airport Vehicle Runway Incursion Warning Systems (RIWS)

This AC contains minimum performance specifications for systems and equipment airports use to provide a warning to drivers on an airfield about a potential runway incursion. This AC discusses two types of detection systems: a preconfigured, commercial off the shelf (COTS) system; and a system with custom hardware and software.

09-28-2012
150/5230-4B AAS-300 Aircraft Fuel Storage, Handling, Training, and Dispensing on Airports

Contains specifications and guidance for the storage, handling, and dispensing of aviation fuel on airports. Additionally, this AC provides standards and guidance for the training of personnel who conduct these activities.

Please see the associated Addendum for a list of companies offering courses of instruction in line service training as well as supervisory training that are acceptable to the Administrator. We will update the Addendum on a quarterly basis.

09-28-2012
150/5300-13A AAS-100 Airport Design

Contains the Federal Aviation Administration’s (FAA) standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.This substantial revision fully incorporates all previous changes to AC 150/5300-13 as well as new standards and technical requirements.

See also Interim Guidance on Land Uses Within a Runway Protection Zone.

CHANGE 1 (02-26-2014)

This change replaces Runway Reference Code (RRC) with new Approach and Departure Reference Code (APRC and DPRC) designations; expands Taxiway Fillet information and adds a new Appendix 8, Taxiway Fillet Design; adjusts TDG limits, with associated changes to fillet dimensions; moves Figure 4-1 to Chapter 1; combines Tables 3-4 and 3-5 to form Standards for Instrument Approach Procedures; incorporates minor editorial corrections; adds a Record of Changes at the end of the AC; and incorporates revisions describes in the Errata Sheet for the original release.

See also Additional Design Tools and Drawings for Change 1.

09-28-2012
150/5220-22B AAS-100 Engineered Materials Arresting Systems (EMAS) for Aircraft Overruns

Contains standards for the planning, design, installation, and maintenance of Engineered Materials Arresting Systems (EMAS) in runway safety areas (RSAs).

09-27-2012
150/5345-43G AAS-100 Specification for Obstruction Lighting Equipment

This specification sets forth the FAA requirements for obstruction lighting equipment used to increase conspicuity of structures to permit early obstruction recognition by pilots.

09-26-2012
150/5345-53D AAS-100 Airport Lighting Equipment Certification Program

This AC describes the Airport Lighting Equipment Certification Program (ALECP). It provides information on how an organization can get Federal Aviation Administration (FAA) acceptance as a third-party certification body (third-party certifier) and how manufacturers may get equipment qualified under the program. It includes a list of the equipments that are certified under the program. This AC does not impose requirements or mandate participation in the ALECP by any party. This revision clarifies the criteria that FAA will use to determine whether a certification body qualifies for participation and how equipment may be qualified.

09-26-2012
150/5340-30G AAS-100 Design and Installation Details for Airport Visual Aids

Provides guidance and recommendations on the installation of airport visual aids.

See also--

09-21-2012
150/5150-2C APP-520 Federal Surplus Personal Property Program for Public Airport Purposes

This AC explains to public airport sponsors and other interested parties the Federal Surplus Personal Property Program for Public Airports.  It contains the procedures for applying for screener credentials and to request authorized surplus personal property through the GSAXcess system administered by the General Services Administration (GSA) for disposition of federal surplus personal property.

08-31-2012
150/5220-21C AAS-100 Aircraft Boarding Equipment

Contains the FAA's performance standards, specifications, and recommendations for the design, manufacture, testing and maintenance of equipment used in the boarding of airline passengers. The physical area covered in this AC is that which is bounded by the door of the passenger terminal area, on one end, to the door of the aircraft, on the other end. Although this AC refers only to aircraft boarding (enplaning), all references apply equally to disembarking (deplaning) with the described procedures occurring in reverse order.

The previous version of this AC discussed only the passenger lift scenario and associated equipment. This document updates that effort and addresses the other methods and equipment used to board an aircraft, including passenger boarding bridges, ramps, lifts, and aircraft boarding chairs.

06-29-2012
150/5390-2C AAS-100 Heliport Design

Provides standards for the design of heliports serving helicopters with single rotors. Basic concepts can also be applied to facilities serving helicopters with tandem (front and rear) or dual (side by side) rotors; although many standards will not apply to these facilities.

This version adds guidance for pavement or structure larger than the touchdown and liftoff area (TLOF), but less than the size of the final approach and take off (FATO); turbulence effects; clearance between parking areas and taxi routes and within parking areas; minimum dimensions of curved approach/departure airspace; Touchdown/Positioning Circle (TDPC) Marking; Flight Path Alignment Guidance markings and lights; Emergency Helicopter Landing Facility Requirements (EHLF); FATO to FATO separation distance for simultaneous operations; revised standards for size of “H” for general aviation heliports; increased TLOF size when the FATO of a hospital heliport is not load bearing; and Heliport Protection Zone (HPZ) for hospital heliports. See "Principal Changes" for a complete list.

04-24-2012
150/5200-36A AAS-300 Qualifications for Wildlife Biologist Conducting Wildlife Hazard Assessments and Training Curriculums for Airport Personnel Involved in Controlling Wildlife Hazards on Airports (Consolidated AC includes Change 1)

Describes the qualifications for wildlife biologists who conduct Wildlife Hazard Assessments (WHA) for airports certificated under 14 CFR Part 139 and at non-certificated airports funded by the Airport Improvement Program (AIP) or Passenger Facility Charge (PFC) Program. Addresses the minimum wildlife hazard management curriculum for the initial and recurrent training of airport personnel who implement an FAA-approved Wildlife Hazard Management Plan (WHMP).

Consolidated AC includes Change 1 dated 1/31/2013. See also--

CHANGE 1 (01-31-2013)

This Change adds language requiring certificated airports to maintain documentation of airport wildlife biologist qualifications. This change is in response to an Office of the Inspector General safety recommendation.

01-31-2012
150/5220-26 AAS-300 Airport Ground Vehicle Automatic Dependent Surveillance - Broadcast (ADS-B) Out Squitter Equipment

Provides guidance on the development, installation, testing, approval, and maintenance of Automatic Dependent Surveillance – Broadcast (ADS-B) Out squitter units for airport ground vehicles. Using this AC, airports will be able to acquire approved and authorized airport ground vehicle ADS-B squitter units that are compliant with Title 14 Code of Federal Regulations (CFR), Part 91, Automatic Dependent Surveillance-Broadcast (ADS–B) Out Performance Requirements to Support Air Traffic Control (ATC) Service, as well as the initial set of ADS-B applications. Please note that the technical specifications for manufacturing ADS-B squitter units for airport ground vehicles are published in the FAA’s document, Vehicle Automatic Dependent Surveillance - Broadcast (ADS-B) Specification, Version 2.4, published May 1, 2012.

Contact the appropriate FAA Airport District Office or Regional Airports Division to discuss Airport Improvement Program (AIP) eligibility.

Learn more about Automatic Dependent Surveillance-Broadcast (ADS-B).

CHANGE 1 (09-01-2012)

Provides guidance on the development, installation, testing, approval, and maintenance of Automatic Dependent Surveillance – Broadcast (ADS-B) Out squitter units for airport ground vehicles. Change 1 updates the ADS-B Specification version number, Table 1 to show airports with existing or planned FAA surveillance systems, and Appendix A to list qualified products.

11-14-2011
150/5300-17C AAS-100 Standards for Using Remote Sensing Technologies in Airport Surveys

Provides guidance on the use of remote sensing technologies in the collection of data describing the physical infrastructure of an airport. This version is a substantial rewrite and includes new sections on remote sensing technologies other than aerial imagery (primarily LIDAR) for collecting airport data. See also the Airports GIS website.

09-30-2011
150/5370-10F AAS-100 Standards for Specifying Construction of Airports

Provides standards for the construction of airports. Items covered in this AC include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation.

Access related Pay Reduction Spreadsheets on our Airport Design Software page.

09-30-2011
1 - 25 of 122 results.
First Previous [1] 2 3 4 5 Next Last