|90-42F||AFS-820||Traffic Advisory Practices at Airports without Operating Control Towers Contains good operating practices and procedures for use when approaching or departing airports without an operating control tower and airports that have control towers operating part time. Includes changes in radio frequencies and phraseology.||05-21-1990|
U.S Terminal and En Route Area Navigation (RNAV) Operations with Change 2
This advisory circular (AC) provides operational and airworthiness guidance for operation on U.S. Area Navigation (RNAV) routes, Instrument Departure Procedures (DPs), and Standard Terminal Arrivals (STARs). Operators and pilots should use the guidance in this AC to determine their eligibility for these U.S. RNAV routes and procedures. In lieu of following this guidance without deviation, operators may elect to follow an alternative method, provided the alternative method is found to be acceptable by the Federal Aviation Administration (FAA). For the purpose of this AC, "compliance" means meeting operational and functional performance criteria. Mandatory terms in this AC such as "must" are used only to ensure applicability of these particular methods of compliance when the acceptable means of compliance described are used. This AC does not change, add, or delete regulatory requirements or authorize deviations from regulatory requirements.
|90-95||AFS-800||Unanticipated Right Yaw in Helicopters Examines the unanticipated right yaw phenomenon, the circumstances under which it may be encountered, how it can be prevented, and how the pilot should react if it is encountered.||02-07-1995|
Use of suitable Area navigation (RNAV) system on Conventional Routes and Procedures - Change 1
This advisory circular (AC) provides operational and airworthiness guidance regrading the suitablity and use of RNAV systems while operating on or transitioning to, conventional i.e. non-RNAV, routes and procedures within the United States (US) National Airspace System (NAS).
|90-58C||AFS-310||VOR Course Errors Resulting from 50 kHz Channel Mis-Selection Provides information concerning a potentially hazardous situation when a 200 channel VOR receiver is inadvertently mistuned by 50 kHz from the frequency of a 100 kHz ground station.||04-07-1975|