|120-83||AFS-220||Flight Deck Observer Seat and Associated Equipment Provides guidance for 14 CFR parts 121, 125, and 135 certificate holders for obtaining an FAA finding regarding the operational safety/suitability of the Flight Deck Observer Seat and Associated Equipment.||06-03-2004|
|120-82||AFS-230||Flight Operational Quality Assurance Provides guidance on one means, but not necessarily the only means, of developing, implementing, and operating a voluntary Flight Operational Quality Assurance (FOQA) program that is acceptable to the Federal Aviation Administration (FAA).||04-12-2004|
|120-81||AFS-200W||Whistleblower Protection Program (Air Carrier) Provides guidance for air carrier employees, air carrier contractor employees, and air carrier subcontractor employees, concerning the joint Federal Aviation Administration (FAA)/Occupational Safety and Health Administration (OSHA) Whistleblower Protection Program.||03-25-2004|
This advisory circular (AC) updates information regarding the hazards and risks of in-flight fires on transport category aircraft. The information includes recommended crewmember procedures and training for combating in-flight fires. The National Transportation Safety Board (NTSB) issued Safety Recommendations A-11-87 through A-11-91 during the investigation of United Parcel Service (UPS) flight 6 accident on September 3, 2010 in the United Arab Emirates. The flightcrew encountered a "Fire Main Deck" master warning about 22 minutes into the flight; they declared an emergency and initiated a return to Dubai International Airport (DXB). The aircraft crashed inside an Emirate army post 9 miles from DXB, and both flightcrew members were fatally injured. NTSB findings revealed safety issues related to the training and use of oxygen mask; communicating with oxygen masks donned; and oxygen mask stowage and the smoke, fire, or fumes checklists. This revision to AC 120-80 is in response to NTSB recommendations A-11-88 through A-11-90.
|120-78||AFS-300||Acceptance and Use of Electronic Signatures, Electronic Recordkeeping Systems, and Electronic Manuals This AC provides guidance on the acceptance and use of electronic signatures to satisfy certain operational and maintenance requirements. This AC also provides guidance on the acceptability of electronic recordkeeping systems and electronic maintenance manuals, including inspection procedures manuals, quality, operations manuals, and training manuals required by Title 14 of the Code of Federal Regulations (14 CFR).||10-29-2002|
|120-77||AFS-300||Maintenance and Alteration Data This advisory circular (AC) provides one means, but not the only means, of ensuring that the contemplated maintenance, alteration, or continue-in-service condition is in compliance with applicable regulations and existing policy.||10-07-2002|
Guidelines for the Certification, Airworthiness, and Operational Use of Electronic Flight Bags
This joint Flight Standards Service (AFS) and Aircraft Certification Service (AIR) advisory circular (AC) contains guidance on the operational use of Electronic Flight Bags (EFBs). It is intended for all operators conducting flight operations under Title 14 of the Code of Federal Regulations (14 CFR) part 121, 125, 135, or 91 subpart F (part 91F) and part 91 subpart K (part 91K) who want to replace required paper information or utilize other select functions of an EFB. This AC sets forth an acceptable means, but not the only means, to obtain Federal Aviation Administration (FAA) authorization for the operational use of EFBs. Part 91 operators can find additional EFB information in the current edition of AC 91-78, Use of Class 1 or Class 2 Electronic Flight Bag (EFB). For guidance on the installation of EFB components, refer to the current edition of AC 20-173, Installation of Electronic Flight Bag Components.
|120-73||ANM-100||Damage Tolerance Assessment of Repairs to Pressurized Fuselages Provides guidance to operators of certain transport category airplanes operated under 14 CFR Parts 91, 121, 125, and 129. The guidance provides an acceptable means of compliance with the regulations that require incorporating FAA-approved “repair assessment guidelines” into an operator’s FAA-approved maintenance or inspection program. The means of compliance described is intended to provide guidance to supplement the engineering and operational judgment that must form the basis of any compliance findings relative to repair assessments for pressurized fuselages.||12-14-2000|
|120-72||AFS-300||Maintenance Resource Management Training Presents guidelines for developing, implementing, reinforcing, and accessing Maintenance Resources Management Training Programs for improving communication effectiveness, and safety in maintenance operations.||09-28-2000|
|120-71A||AFS-210||Standard Operating Procedures for Flight Deck Crewmembers. Presents background, basic concepts and philosophy in respect to SOP. SOP’s are universally recognized as basic to safe aviation operations. Effective crew coordination and crew performance, two central concepts of crew resource management depend upon the crew’s having a shared mental model of each task. That mental model, in turn, is founded on SOP’s. This AC emphasizes that SOP’s must be clear, comprehensive, and readily available in the manuals used by flight deck crewmembers. A comprehensive SOP template is provided.||02-27-2003|
Operational Authorization Process for Use of Data Link Communication System
This advisory circular (AC) applies to all operators conducting data link operations and presents various methods for all air operators using data link systems to meet Federal Aviation Administration (FAA) and International Civil Aviation Organization (ICAO) Standards, to include as well-recommended practices. The AC introduces U.S. domestic Controller-Pilot Data Link Communication Departure Clearances (CPDLC-DCL) and the European LINK 2000+ CPDLC program. This revision also incorporates an expanded description of event reporting and defines the roles and responsibilities during the authorization process. It provides operational approval information for operators conducting operations under Title 14 of the Code of Federal Regulations (14 CFR) parts 91, 91 subpart K (part 91K), 121, 125, 129, 133, and 135. For complete airworthiness guidance for new aircraft and systems, refer to the current edition of AC 20-140, Guidelines for Design Approval of Aircraft Data Communications Systems Supporting Air Traffic Services (ATS). Authorizations to conduct data link operations approved under previous versions of AC 120-70 do not require further evaluation.
Pilot Records Improvement Act of 1996
The Pilot Records Improvement Act of 1996 (PRIA), as amended, was enacted to ensure that air carriers and air operators adequately investigate a pilot’s background before allowing that pilot to conduct commercial air carrier flights. Under PRIA, a hiring employer cannot place a pilot into service until he or she obtains and reviews the last 5 years of the pilot’s background and other safety-related records as specified in PRIA.
This advisory circular (AC) is supplemented by the current edition of Federal Aviation Administration (FAA) Order 8000.88, PRIA Guidance for FAA Inspectors, and numerous other documents found on the PRIA Web site at http://www.faa.gov/pilots/lic_cert/pria. These sources of detailed information related to PRIA provide invaluable assistance to the certificate holder or others concerning the PRIA request process as well as other compliance issues.
The FAA has greatly expanded this AC from the previous version to address operational situations that the hiring employer may encounter that could affect his or her records request process through PRIA.
The Flight Standards Service (AFS) is committed to a stakeholder-driven system of operation that will deliver FAA records and assistance to all parties subject to PRIA, when necessary.
|120-66B||AFS-230||Aviation Safety Action Program (ASAP) This AC provides guidance for establishing an air transportation Aviation Safety Action Program (ASAP). This objective of the ASAP is to encourage air carrier and repair station employees to voluntarily report safety information that may be critical to identifying potential precursors to accidents. Under ASAP, safety issues are not resolved through punishment or discipline.||11-15-2002|
|120-64||AFS-200N||Operational Use & Modification of Electronic Checklists Provides an acceptable means, but not the only means, to address the processes for approval, operational use, and modification of electronic checklists (ECL) and ECL data by air carriers.||04-24-1996|
|120-63||AFS-205||Helicopter Simulator Qualification Provides a suggested means of compliance with the FAR regarding the evaluation and qualification of helicopter simulators to be used in training and checking||10-11-1994|
|120-62||AFS-210||Takeoff Safety Training Aid Announces the availability of a joint industry/FAA Takeoff Safety Training Aid to help air carriers and pilots increase safety during the takeoff phase of flight.||09-12-1994|
In-flight Radiation Exposure
This advisory circular (AC) provides basic background information and links to sources of more detailed information that can be used to improve air carrier programs that inform crewmembers about in-flight ionizing radiation exposure.
|120-60B||AFS-220||Ground Deicing and Anti-icing Program Provides one means, but not the only means, for obtaining approval of a Ground Deicing and Anti-icing Program, and for ensuring compliance with FAR Section 121.629.||12-20-2004|
|120-59A||AFS-230||Air Carrier Internal Evaluation Programs Provides information and guidance material that may be used by air carrier certificate holders, operating under Federal Aviation Regulations (FAR) Parts 121 and 135, to design or develop an Internal Evaluation Program. The procedures and practices outlined in this (AC can be applied to maintenance, flight operations, and security aspects of an air carrier’s organization. Internal evaluation guidance for certificate holders other than those operating under FAR Pars 121 and 135 may be issued separately in the future.||04-17-2006|
Pilot Guide Large Aircraft Ground Deicing
Contains recommendations for ensuring safe operations of large airplanes during icing conditions and guidelines for the development of adequate procedures for the deicing of large airplanes.
New OPR effectives 10/20/14 is AFS-200
|120-57A||AFS-400||Surface Movement Guidance and Control System Describes the standards and provides guidance in the development of a Surface Movement Guidance and Control System (SMGCS) plan for U.S. airports where scheduled air carriers are authorized to conduct operations when the visibility is less than 1,200 feet runway visual range.||12-19-1996|
Air Carrier Operational Approval and Use of TCAS II
This advisory circular (AC) provides an acceptable, but not the only, means to address Traffic Alert and Collision Avoidance System (TCAS) issues related to installation and use of TCAS II regarding compliance with Title 14 of the Code of Federal Regulations (14 CFR) parts 121, 125, and 129 requirements for air carriers.
|120-54A||AFS-230||Advanced Qualification Program Provides FAA guidance for approval of an Advanced Qualification Program (AQP) under SFAR 58.||06-23-2006|
Guidance for Conduction and Use of Flight Standardization Board Evaluations
a. Evaluating Manufactured or Modified Aircraft. It provides a means but not the only means of evaluating manufactured or modified aircraft by the use of standard systems, processes, and tests necessary to determine pilot training and qualification requirements.
b. Differences in Training and Qualification between Aircraft. It describes an acceptable means, but not the only means, of compliance with applicable Title 14 of the Code of Federal Regulations (14 CFR) that provide for differences in training and qualification between aircraft with the same type certificate. It further describes an acceptable means for providing related aircraft differences training and qualification under provision of 14 CFR part 121 between aircraft with different type certificates that have been "designated" by the Administrator as related. Both of these processes use the provision of the Flight Standardization Board (FSB) report as the basis for the approval of pilot training and qualification necessary for the operation of aircraft. This AC is intended to enhance safety by:
(1) Providing a standard method of assessing applicant programs.
(2) Directly relating pilot training and qualification requirements to fleet characteristics, operating concepts, and pilot assignments.
(3) Permitting better industry planning and management by outlining what FAA requirements apply, what training resources or devices are needed, and what alternatives are possible.
(4) Encouraging aircraft manufacturers to design with the goal of developing common characteristics between related aircraft
(5) Providing a recommended framework for application of suitable credits or constraints to better address new technology and future safety enhancements.
|120-51E||AFS-210||Crew Resource Management Training Provides FAA guidance for approval of an Advanced Qualification Program (AQP) under SFAR 58.||01-22-2004|