Preventing Injuries Caused by Turbulence
Ground Deicing Using Infrared Energy
Provides guidelines and recommendation for deicing aircraft with infrared technology. Also provides means for obtaining approval for the use & inclusion of infrared technology in an operators deicing program.
Air Cargo Operations
Provides air carriers with recommended procedures for managing air carrier cargo operations.
Aircraft Weight and Balance Control
Provides one means, but not the only means, for obtaining approval of a weight and balance control system. It provides guidance to certificate holders that are required to have an approved weight and balance program by Title 14, Code of Federal Regulations (14 CFR) Part 121 or choose to have an approved program under 14 CFR Part 135.
Ground Deicing and Anti-icing Program
Provides one means, but not the only means, for obtaining approval of a Ground Deicing and Anti-icing Program, and for ensuring compliance with FAR Section 121.629.
Aging Aircraft Inspections and Records Reviews
This advisory circular (AC) provides guidance pertaining to aging aircraft inspections and records reviews accomplished to satisfy the requirements of the Aging Aircraft Safety Final Rule. This information represents an acceptable way, but not the only way, for an aging airplane inspection and records review to be conducted. However, if you use the means described in this AC, you must follow it in all important aspects.
Change 1 dated 01/15/2009
Line Operational Simulations: Line Oriented Flight Training, Special Purpose Operational Training, Line Operational Evaluation
Presents guidelines for the design and implementation of line operational simulations (LOS).
Flight Deck Observer Seat and Associated Equipment
Provides guidance for 14 CFR parts 121, 125, and 135 certificate holders for obtaining an FAA finding regarding the operational safety/suitability of the Flight Deck Observer Seat and Associated Equipment.
Flight Operational Quality Assurance
Provides guidance on one means, but not necessarily the only means, of developing, implementing, and operating a voluntary Flight Operational Quality Assurance (FOQA) program that is acceptable to the Federal Aviation Administration (FAA).
Whistleblower Protection Program (Air Carrier)
Provides guidance for air carrier employees, air carrier contractor employees, and air carrier subcontractor employees, concerning the joint Federal Aviation Administration (FAA)/Occupational Safety and Health Administration (OSHA) Whistleblower Protection Program.
Crew Resource Management Training
Provides FAA guidance for approval of an Advanced Qualification Program (AQP) under SFAR 58.
Address a number of issues linked to in-flight fires
Standard Operating Procedures for Flight Deck Crewmembers.
Presents background, basic concepts and philosophy in respect to SOP. SOP’s are universally recognized as basic to safe aviation operations. Effective crew coordination and crew performance, two central concepts of crew resource management depend upon the crew’s having a shared mental model of each task. That mental model, in turn, is founded on SOP’s. This AC emphasizes that SOP’s must be clear, comprehensive, and readily available in the manuals used by flight deck crewmembers. A comprehensive SOP template is provided.
Aviation Safety Action Program (ASAP)
This AC provides guidance for establishing an air transportation Aviation Safety Action Program (ASAP). This objective of the ASAP is to encourage air carrier and repair station employees to voluntarily report safety information that may be critical to identifying potential precursors to accidents. Under ASAP, safety issues are not resolved through punishment or discipline.
Acceptance and Use of Electronic Signatures, Electronic Recordkeeping Systems, and Electronic Manuals
This AC provides guidance on the acceptance and use of electronic signatures to satisfy certain operational and maintenance requirements. This AC also provides guidance on the acceptability of electronic recordkeeping systems and electronic maintenance manuals, including inspection procedures manuals, quality, operations manuals, and training manuals required by Title 14 of the Code of Federal Regulations (14 CFR).
Maintenance and Alteration Data
This advisory circular (AC) provides one means, but not the only means, of ensuring that the contemplated maintenance, alteration, or continue-in-service condition is in compliance with applicable regulations and existing policy.
Criteria for Approval of Category I and Category II Weather Minima for Approach
This AC provides an acceptable means, but not the only means, for obtaining and maintaining approval of CAT I & II Weather Minima including the installation and approval of associated aircraft systems.
Air Carrier First Aid Programs
Provides guidance about first aid program resources, subjects, equipment, and pertinent regulations. This revision adds information about blood borne pathogen awareness programs.
Damage Tolerance Assessment of Repairs to Pressurized Fuselages
Provides guidance to operators of certain transport category airplanes operated under 14 CFR Parts 91, 121, 125, and 129. The guidance provides an acceptable means of compliance with the regulations that require incorporating FAA-approved “repair assessment guidelines” into an operator’s FAA-approved maintenance or inspection program. The means of compliance described is intended to provide guidance to supplement the engineering and operational judgment that must form the basis of any compliance findings relative to repair assessments for pressurized fuselages.
Maintenance Resource Management Training
Presents guidelines for developing, implementing, reinforcing, and accessing Maintenance Resources Management Training Programs for improving communication effectiveness, and safety in maintenance operations.
Criteria for Approval of Category III Weather Minima for Takeoff, Landing, and Rollout
States an acceptable means, not the only means, for obtaining approval of Category III Landing Weather Minima and low visibility takeoff, including the installation and approval of associated aircraft systems.
|120-94||ANM-100||Aircraft Electrical Wiring Interconnection Systems Training Program||11-20-1997|
Criteria For Operational Approval of Auto Flight Guidance Systems
States an acceptable means, but not the only means, for obtaining operational approval of the initial engagement or use of an Auto Flight Guidance System (AFGS) under Title 14 CFR part 121, section 121.579(d); part 125, section 125.329(e); and part 135, section 135.93(e) for the takeoff and initial climb phase of flight.
Surface Movement Guidance and Control System
Describes the standards and provides guidance in the development of a Surface Movement Guidance and Control System (SMGCS) plan for U.S. airports where scheduled air carriers are authorized to conduct operations when the visibility is less than 1,200 feet runway visual range.
Operational Use & Modification of Electronic Checklists
Provides an acceptable means, but not the only means, to address the processes for approval, operational use, and modification of electronic checklists (ECL) and ECL data by air carriers.