« Back to Advisory Circulars main page

Will search within "Passenger Facility Charge (PFC)" only. Search all ACs.

1 - 25 of 72 results.

Export to MS Excel

Search results
Number Office Title Date
150/5070-6B APP-400 Airport Master Plans

Provides guidance for the preparation of airport master plans that range in size and function from small general aviation to large commercial service facilities. Appendix D of this AC cancels Chapter 1, Section 5; Appendix 6; and Appendix 7 of AC 150/5300-13, Airport Design. Consolidated file contains Changes 1 and 2.

150/5360-9 APP-400 Planning and Design of Airport Terminal Facilities at Non-Hub Locations

Provides guidance material for the planning and design of airport terminal buildings at non-hub locations.

Note: Portions of this AC are under review for update. Please contact the National Planning and Environmental Division for assistance.

Because of the size of this document (5.28 MB), it is available as one large file (see Complete) or as several smaller files (see Parts 1-4).

150/5360-13 APP-400 Planning and Design Guidelines for Airport Terminal Facilities

Provides guidelines for the planning and design of airport terminal buildings and related access facilities. Consolidated file includes Change 1.

Note: Portions of this AC are under review for update. Please contact the National Planning and Environmental Division for assistance.

Because of the size of the document, it is available as one large file (see Complete) or as several smaller files (Part 1-4).

150/5200-28E AAS-300 Notices to Airmen (NOTAMs) for Airport Operators

This AC provides guidance on using the Notice to Airmen (NOTAM) system for reporting airport facilities changes or outages and for airport condition reporting. It explains procedures used to describe, format, and disseminate information on unanticipated or temporary changes to components of, or hazards in, the National Airspace System (NAS). 

150/5200-30C AAS-300 Airport Winter Safety and Operations

This advisory circular (AC) provides guidance to assist airport operators in developing a snow and ice control plan, conducting and reporting runway friction surveys, and establishing snow removal and control procedures. Version B of this AC cancelled AC 150/5220-13B, Runway Surface Condition Sensor Specification Guide, dated March 27, 1991. Consolidated file contains Change 1.

See also Notice to Manufacturers of Airport In-Pavement Stationary Runway Weather Information Systems about AIP Buy American Requirement (10/28/2011). The FAA is requesting information to determine if waivers to this requirement are needed.

CHANGE 1 (02-15-2012)

Adds the requirement to identify Aircraft Rescue and Fire Fighting mutual aid access points(s) to include gate(s) operability. This Change is in response to a National Transportation Safety Board safety recommendation.

150/5200-33B AAS-300 Hazardous Wildlife Attractants On or Near Airports Provides guidance on certain land uses that have the potential to attract hazardous wildlife on or near public-use airports. It also discusses airport development projects (including airport construction, expansion, and renovation) affecting aircraft movement near hazardous wildlife attractants. 08-28-2007
150/5210-7D AAS-300 Aircraft Rescue and Fire Fighting Communications

Provides guidance to assist airport operators in preparing for Aircraft Rescue and Fire Fighting (ARFF) communications.

150/5210-13C AAS-300 Airport Water Rescue Plans and Equipment

Provides guidance to assist airport operators in preparing for water rescue operations.

150/5210-14B AAS-300 Aircraft Rescue Fire Fighting Equipment, Tools and Clothing

Contains references to the minimum requirements for the selection and performance of aircraft rescue and firefighting personal protective equipment (PPE), self contained breathing apparatus (SCBA), and powered rescue tools. Designed to assist airport management in the development of local procurement specifications for airport fire departments.

150/5210-23 AAS-300 ARFF Vehicle and High Reach Extendable Turret (HRET) Operation, Training and Qualifications

Provides FAA standards and recommendations for the training of airport firefighting and rescue personnel in the proper operation and tactical use of Aircraft Rescue and Fire Fighting (ARFF) vehicles and ARFF vehicles equipped with High Reach Extendable Turret (HRETs). This guidance includes the development of department Standard Operating Guidelines (SOGs) and the development of department proficiency evaluation standards.

150/5210-24 AAS-300 Airport Foreign Object Debris (FOD) Management

Provides guidance for developing and managing an airport foreign object debris (FOD) program.  In addition, this AC provides specifications for the equipment used in FOD removal operations.

The described program addresses prevention, detection, removal, and evaluation as well as strategies and practices that can help reduce FOD at airports. The guidelines presented in this AC are advisory and can be implemented at the discretion of the airport operator in accordance with the airport operator’s approved Airport Certification Manual.

This AC cancels AC 150/5380-5B, Debris Hazards at Civil Airports, dated July 5, 1996.

150/5000-13A AAS-100 Announcement Of Availability: RTCA Inc., Document RTCA-221 Announces the availability of RTCA, Inc., Document RTCA/DO-221, Guidance and Recommended Requirements for Airport Surface Movement Sensors, dated April 24, 1994. Provides recommended minimum performance standards for airport surface movement sensors and specifies both sensor and system characteristics that provide guidance to airport systems designers, manufacturers, installers, and users of the equipment.

Cancels AC 150/5000-13, Announcement of Availability-RTCA Inc., Document RTCA-221, dated September 7, 1994.
150/5210-5D AAS-100 Painting, Marking, and Lighting of Vehicles Used on an Airport

Provides guidance, specifications, and standards for painting, marking, and lighting of ground vehicles operating in the airport air operations area (AOA). The approved lights, colors, and markings described in the AC assure the conspicuity of vehicles operating in the AOA from both the ground and the air. The AC contains new specifications and recommendations for the painting, marking, and lighting of Towbarless Tow Vehicles (TLTVs).

150/5210-15A AAS-100 Aircraft Rescue and Firefighting Station Building Design Contains information, references and guidelines for construction of Aircraft Rescue and Fire Fighting (ARFF) station building design. 09-10-2008
150/5210-18A AAS-100 Systems for Interactive Training Of Airport Personnel Provides guidance in the design of systems for interactive training of airport personnel, which are eligible for funding under the Airport Improvement Program (AIP) and with Passenger Facility Charge (PFC) revenues. 09-29-2008
150/5210-19A AAS-100 Driver's Enhanced Vision System (DEVS) Contains performance standards, specifications, and recommendations for DEVS equipment on Aircraft Rescue and Fire Fighting (ARFF) vehicles. 06-12-2009
150/5220-10E AAS-100 Guide Specification for Aircraft Rescue and Fire Fighting (ARFF) Vehicles

Provides an interactive specification that airports can use in procuring Aircraft Rescue and Fire Fighting (ARFF) vehicles. It describes the selection process, vehicle requirements, and how to produce formal specifications.

150/5220-17B AAS-100 Aircraft Rescue and Fire Fighting (ARFF) Training Facilities

Provides guidance on the design, construction, and operation of aircraft rescue and fire fighting (ARFF) training facilities.

150/5220-18A AAS-100 Buildings for Storage and Maintenance of Airport Snow and Ice Control Equipment and Materials Provides guidance for the site selection and design of buildings used to store and maintain airport snow and ice control equipment, store approved materials, and provide personnel areas required to support the requirements under the airport operator’s winter storm management plan. 09-14-2007
150/5220-20A AAS-100 Airport Snow and Ice Control Equipment

This advisory circular provides guidance to assist airport operators in the procurement of snow and ice control equipment for airport use.

150/5220-21C AAS-100 Aircraft Boarding Equipment

Contains the FAA's performance standards, specifications, and recommendations for the design, manufacture, testing and maintenance of equipment used in the boarding of airline passengers. The physical area covered in this AC is that which is bounded by the door of the passenger terminal area, on one end, to the door of the aircraft, on the other end. Although this AC refers only to aircraft boarding (enplaning), all references apply equally to disembarking (deplaning) with the described procedures occurring in reverse order.

The previous version of this AC discussed only the passenger lift scenario and associated equipment. This document updates that effort and addresses the other methods and equipment used to board an aircraft, including passenger boarding bridges, ramps, lifts, and aircraft boarding chairs.

150/5220-22B AAS-100 Engineered Materials Arresting Systems (EMAS) for Aircraft Overruns

Contains standards for the planning, design, installation, and maintenance of Engineered Materials Arresting Systems (EMAS) in runway safety areas (RSAs).

150/5220-23 AAS-100 Frangible Connections

Contains specifications for the frangible connections used to support objects located in airfield safety areas, including fuse bolts, special material bolts, frangible couplings, tear-through fasteners, and tear-out sections.

This AC is based on the performance standards, specifications, and recommendations contained in the International Civil Aviation Organization (ICAO) Aerodrome Design Manual, Part 6, Frangibility, and the U.S. Air Force (USAF) Engineering Technical Letter (ETL) 01-20: Guidelines for Airfield Frangibility Zones.

150/5220-25 AAS-100 Airport Avian Radar Systems

Provides guidance on the use of avian radar systems to supplement an airport’s Wildlife Hazard Management Plan (WHMP) and reduce the potential avian threats to aircraft.

See also:

150/5300-13A AAS-100 Airport Design

Contains the Federal Aviation Administration’s (FAA) standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.This substantial revision fully incorporates all previous changes to AC 150/5300-13 as well as new standards and technical requirements.

See also Interim Guidance on Land Uses Within a Runway Protection Zone.

CHANGE 1 (02-26-2014)

This change replaces Runway Reference Code (RRC) with new Approach and Departure Reference Code (APRC and DPRC) designations; expands Taxiway Fillet information and adds a new Appendix 8, Taxiway Fillet Design; adjusts TDG limits, with associated changes to fillet dimensions; moves Figure 4-1 to Chapter 1; combines Tables 3-4 and 3-5 to form Standards for Instrument Approach Procedures; incorporates minor editorial corrections; adds a Record of Changes at the end of the AC; and incorporates revisions describes in the Errata Sheet for the original release.

See also Additional Design Tools and Drawings for Change 1.


1 - 25 of 72 results.

Export to MS Excel