Notices to Airmen (NOTAMs) for Airport Operators
This AC provides guidance on using the Notice to Airmen (NOTAM) system for reporting airport facilities changes or outages and for airport condition reporting. It explains procedures used to describe, format, and disseminate information on unanticipated or temporary changes to components of, or hazards in, the National Airspace System (NAS).
Specification for Runway and Taxiway Signs
This AC contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.
Survey and Data Standards for Submission of Aeronautical Data Using Airports GIS
This AC provides the specifications and technical requirements for data collection conducted at airports in support of the FAA Airport Surveying – Geographic Information System (GIS) Program. The information furnished under these standards covers the entire spectrum of the FAA’s airport data requirements, including runway and stopway data, navigational aid data, obstruction data, and data on various airport features, including taxiways, aprons, and landmark features.
This version of the AC is a major rewrite; it now conforms to the new FAA enterprise data model and process of maintaining a single authoritative source of aeronautical data.
Ground Vehicle Operations to include Taxiing or Towing an Aircraft on Airports
This AC and its appendices provide guidance to airport operators about developing training programs for safe ground vehicle operations, personnel taxiing or towing an aircraft, and pedestrian control on the movement and safety areas of an airport.
This version represents a major rewrite. The AC now addresses aircraft being taxied by persons other than certificated pilots; adds a definition for Airport Operations Area; revises the definition for Non-Movement Area; replaces the term “Ramp” with “Apron” to harmonize with the International Civil Aviation Organization (ICAO) Annex 14 Volume 1; adds a definition for Vehicle or Pedestrian Deviation; provides guidance for towered airports on Part 139 requirements for people and equipment in the Runway Safety Area (RSA); calls for a Letter of Agreement at towered airports between the airport operator, the tower, and FAA Technical Operations; provides guidance on taxing and/or towing aircraft in the movement area by non-pilots; and incorporates numerous changes to format and content throughout the document.
Programs for Training of Aircraft Rescue and Firefighting Personnel
This AC provides information on courses and reference materials for training of Aircraft Rescue and Firefighting (ARFF) personnel. This revision replaces Appendix 1 with an Addendum of Aircraft Rescue and Firefighting (ARFF) Training Facilities, which the FAA will update on a quarterly basis. It also removes the one minute time requirement for donning of Personal Protective Equipment and the Self-Contained Breathing Apparatus.
Airport Snow and Ice Control Equipment
This advisory circular provides guidance to assist airport operators in the procurement of snow and ice control equipment for airport use.
Design and Installation Details for Airport Visual Aids
This AC provides guidance and recommendations about the installation of airport visual aids.
Maintenance of Airport Visual Aid Facilities
This AC provides guidance and specifications for the Maintenance of airport Visual Aid Facilities.
Standards for Airport Markings
This AC contains the FAA standards for markings used on airport runways, taxiways, and aprons.
Specification for Wind Cone Assemblies
This AC contains a specification for wind cone assemblies to be used to provide wind information to pilots. This revision revises the equipment qualification requirements to be furnished under the Federal grant assistance program for airports, applies photometric requirements for internally lighted wind cones to both Size 1 and Size 2 windsocks, and makes editorial changes.
Segmented Circle Airport Marker System
This AC provides standards for a system of airport marking consisting of certain pilot aids and traffic control devices.
Aircraft Fuel Storage, Handling, Training, and Dispensing on Airports
Contains specifications and guidance for the storage, handling, and dispensing of aviation fuel on airports. Additionally, this AC provides standards and guidance for the training of personnel who conduct these activities.
Please see the associated Addendum for a list of companies offering courses of instruction in line service training as well as supervisory training that are acceptable to the Administrator. We will update the Addendum on a quarterly basis.
Engineered Materials Arresting Systems (EMAS) for Aircraft Overruns
Contains standards for the planning, design, installation, and maintenance of Engineered Materials Arresting Systems (EMAS) in runway safety areas (RSAs).
Qualifications for Wildlife Biologist Conducting Wildlife Hazard Assessments and Training Curriculums for Airport Personnel Involved in Controlling Wildlife Hazards on Airports (Consolidated AC includes Change 1)
Describes the qualifications for wildlife biologists who conduct Wildlife Hazard Assessments (WHA) for airports certificated under 14 CFR Part 139 and at non-certificated airports funded by the Airport Improvement Program (AIP) or Passenger Facility Charge (PFC) Program. Addresses the minimum wildlife hazard management curriculum for the initial and recurrent training of airport personnel who implement an FAA-approved Wildlife Hazard Management Plan (WHMP).
Consolidated AC includes Change 1 dated 1/31/2013. See also--
Airport Ground Vehicle Automatic Dependent Surveillance - Broadcast (ADS-B) Out Squitter Equipment
Provides guidance on the development, installation, testing, approval, and maintenance of Automatic Dependent Surveillance – Broadcast (ADS-B) Out squitter units for airport ground vehicles. Using this AC, airports will be able to acquire approved and authorized airport ground vehicle ADS-B squitter units that are compliant with Title 14 Code of Federal Regulations (CFR), Part 91, Automatic Dependent Surveillance-Broadcast (ADS–B) Out Performance Requirements to Support Air Traffic Control (ATC) Service, as well as the initial set of ADS-B applications. Please note that the technical specifications for manufacturing ADS-B squitter units for airport ground vehicles are published in the FAA’s document, Vehicle Automatic Dependent Surveillance - Broadcast (ADS-B) Specification, Version 2.4, published May 1, 2012.
Contact the appropriate FAA Airport District Office or Regional Airports Division to discuss Airport Improvement Program (AIP) eligibility.
Learn more about Automatic Dependent Surveillance-Broadcast (ADS-B).
Standards for Using Remote Sensing Technologies in Airport Surveys
Provides guidance on the use of remote sensing technologies in the collection of data describing the physical infrastructure of an airport. This version is a substantial rewrite and includes new sections on remote sensing technologies other than aerial imagery (primarily LIDAR) for collecting airport data. See also the Airports GIS website.
Precision Approach Path Indicator (PAPI) Systems
Contains the FAA standards for the Precision Approach Path Indicator (PAPI) systems, which provides pilots with visual glideslope guidance during approach for landing.
Operational Safety on Airports During Construction
Provides guidelines for operational safety on airports during construction. Principal changes include prohibiting construction in safety areas when associated runway or taxiway is open, providing guidance for incorporating safety risk management, and including checklists for writing Construction Safety and Phasing Plans (CSPP) and for daily inspections.
Guide Specification for Aircraft Rescue and Fire Fighting (ARFF) Vehicles
Provides an interactive specification that airports can use in procuring Aircraft Rescue and Fire Fighting (ARFF) vehicles. It describes the selection process, vehicle requirements, and how to produce formal specifications.
Airside Use of Heated Pavement Systems
Establishes minimum performance requirements for the design, construction, inspection, and maintenance of heated pavement systems for use in the Aircraft Operations Area (AOA).
Airport Avian Radar Systems
Provides guidance on the use of avian radar systems to supplement an airport’s Wildlife Hazard Management Plan (WHMP) and reduce the potential avian threats to aircraft.
ARFF Vehicle and High Reach Extendable Turret (HRET) Operation, Training and Qualifications
Provides FAA standards and recommendations for the training of airport firefighting and rescue personnel in the proper operation and tactical use of Aircraft Rescue and Fire Fighting (ARFF) vehicles and ARFF vehicles equipped with High Reach Extendable Turret (HRETs). This guidance includes the development of department Standard Operating Guidelines (SOGs) and the development of department proficiency evaluation standards.
Airport Foreign Object Debris (FOD) Management
Provides guidance for developing and managing an airport foreign object debris (FOD) program. In addition, this AC provides specifications for the equipment used in FOD removal operations.
The described program addresses prevention, detection, removal, and evaluation as well as strategies and practices that can help reduce FOD at airports. The guidelines presented in this AC are advisory and can be implemented at the discretion of the airport operator in accordance with the airport operator’s approved Airport Certification Manual.
This AC cancels AC 150/5380-5B, Debris Hazards at Civil Airports, dated July 5, 1996.
Aircraft Rescue and Fire Fighting (ARFF) Training Facilities
Provides guidance on the design, construction, and operation of aircraft rescue and fire fighting (ARFF) training facilities.
Airport Water Rescue Plans and Equipment
Provides guidance to assist airport operators in preparing for water rescue operations.