« Back to Advisory Circulars main page

Will search within "Design, Construction, and Maintenance - General" only. Search all ACs.

26 - 50 of 75 results.

Export to MS Excel

Search results
Number Office Title Date
150/5370-12A AAS-100 Quality Control of Construction for Airport Grant Projects Provides information to ensure the quality of construction accomplished under the Airport Improvement Program (AIP). 09-29-2007
150/5300-9B AAS-100 Predesign, Prebid, and Preconstruction Conferences for Airport Grant Projects

Provides guidance for conducting predesign, prebid, and preconstruction conferences for projects funded under the FAA airport grant program. This version adds quality acceptance as a topic of discussion for the preconstruction conference, items to be addressed in the engineer’s report, details about what should be included in the phasing plan, and discussion of construction management plans.

09-30-2009
150/5345-28G AAS-100 Precision Approach Path Indicator (PAPI) Systems

Contains the FAA standards for the Precision Approach Path Indicator (PAPI) systems, which provides pilots with visual glideslope guidance during approach for landing.

See also--

09-29-2011
150/5360-9 APP-400 Planning and Design of Airport Terminal Facilities at Non-Hub Locations

Provides guidance material for the planning and design of airport terminal buildings at non-hub locations.

Note: Portions of this AC are under review for update. Please contact the National Planning and Environmental Division for assistance.

Because of the size of this document (5.28 MB), it is available as one large file (see Complete) or as several smaller files (see Parts 1-4).

04-04-1980
150/5360-13 APP-400 Planning and Design Guidelines for Airport Terminal Facilities

Provides guidelines for the planning and design of airport terminal buildings and related access facilities. Consolidated file includes Change 1.

Note: Portions of this AC are under review for update. Please contact the National Planning and Environmental Division for assistance.

Because of the size of the document, it is available as one large file (see Complete) or as several smaller files (Part 1-4).

04-22-1988
150/5210-25 AAS-100 Performance Specification for Airport Vehicle Runway Incursion Warning Systems (RIWS)

This AC contains minimum performance specifications for systems and equipment airports use to provide a warning to drivers on an airfield about a potential runway incursion. This AC discusses two types of detection systems: a preconfigured, commercial off the shelf (COTS) system; and a system with custom hardware and software.

09-28-2012
150/5370-2F AAS-100 Operational Safety on Airports During Construction

Provides guidelines for operational safety on airports during construction. Principal changes include prohibiting construction in safety areas when associated runway or taxiway is open, providing guidance for incorporating safety risk management, and including checklists for writing Construction Safety and Phasing Plans (CSPP) and for daily inspections.

09-29-2011
150/5370-13A AAS-100 Off-Peak Construction of Airport Pavements Using Hot-Mix Asphalt Provides guidance for the planning, coordination, management, design, testing, inspection, and execution of off-peak construction of airport pavements using hot-mix asphalt (HMA) paving materials. Also focuses on HMA airfield pavement construction and applies to other types of airfield improvements where off-peak construction is identified as the preferred delivery method. 09-29-2006
150/5320-12C AAS-100 Measurement, Construction, and Maintenance of Skid Resistant Airport Pavement Surfaces Contains guidelines and procedures for the design and construction of skid-resistant pavement; pavement evaluation, without or with friction equipment; and maintenance of high skid-resistant pavements.
CHANGE 1 (04-16-2004)
Updates names and addresses of FAA-approved CFME.
CHANGE 2 (09-02-2004)
Updates references to polymer-based runway surface chip seals to account for current materials technology.
CHANGE 3 (08-25-2004)
Updates names and addresses of FAA-approved CFME.
CHANGE 4 (02-03-2005)
Updates names and addresses of FAA-approved CFME.
CHANGE 5 (04-15-2005)
Updates names and addresses of FAA-approved CFME.
CHANGE 6 (05-25-2005)
Updates names and addresses of FAA-approved CFME.
CHANGE 7 (12-05-2005)
Updates names and addresses of FAA-approved CFME.
CHANGE 8 (02-07-2007)
Updates list of FAA-approved CFME.
03-18-1997
150/5320-15A AAS-100 Management Of Airport Industrial Waste Provides basic information on the characteristics, management, and regulations of industrial wastes generated at airports. Provides guidance for the development of a Storm Water Pollution Prevention Plan (SWPPP) that applies best management practices to eliminate, prevent, or reduce pollutants in storm water runoff associated with particular airport industrial activities. 09-08-2008
150/5340-26B AAS-100 Maintenance of Airport Visual Aid Facilities

Provides recommended guidelines for maintenance of airport visual aid facilities, including Runway Status Lights (RWSL) Systems, rotating beacons, lighted wind cone assemblies, runway and taxiway guidance signs, Precision Approach Path Indicator (PAPI) Systems, Visual Approach Slope Indicators (VASIs), Runway End Identifier Lights (REILs), Medium Approach Lighting Systems (MALS, MALSF, MALSR), Hazard Beacons And Obstruction Lights, and Airport Lighting Control And Monitoring Systems (ALCMS).

09-30-2009
150/5340-26C AAS-100 Maintenance of Airport Visual Aid Facilities

This AC provides guidance and specifications for the Maintenance of airport Visual Aid Facilities.

06-20-2014
150/5345-45C AAS-100 Low-Impact Resistant (LIR) Structures Contains the FAA specifications for low-impact resistant (LIR) structures used to support approach lighting systems (ALS) at airports. 04-06-2007
150/5370-14B AAS-100 Hot Mix Asphalt Paving Handbook

This AC provides general guidance on asphalt paving operations. The Hot-Mix Asphalt Paving Handbook 2000 (handbook) is in Appendix 1 of this AC. The handbook concentrates on field practices for asphalt paving, including plant operations, transportation of materials, surface preparation, laydown, compaction, and quality control processes.

09-27-2013
150/5390-2C AAS-100 Heliport Design

Provides standards for the design of heliports serving helicopters with single rotors. Basic concepts can also be applied to facilities serving helicopters with tandem (front and rear) or dual (side by side) rotors; although many standards will not apply to these facilities.

This version adds guidance for pavement or structure larger than the touchdown and liftoff area (TLOF), but less than the size of the final approach and take off (FATO); turbulence effects; clearance between parking areas and taxi routes and within parking areas; minimum dimensions of curved approach/departure airspace; Touchdown/Positioning Circle (TDPC) Marking; Flight Path Alignment Guidance markings and lights; Emergency Helicopter Landing Facility Requirements (EHLF); FATO to FATO separation distance for simultaneous operations; revised standards for size of “H” for general aviation heliports; increased TLOF size when the FATO of a hospital heliport is not load bearing; and Heliport Protection Zone (HPZ) for hospital heliports. See "Principal Changes" for a complete list.

04-24-2012
150/5380-9 AAS-100 Guidelines and Procedures for Measuring Airfield Pavement Roughness

Provides guidelines and procedures for measuring and evaluating runway roughness as identified by surface profile data of rigid and flexible airport pavements. Provides technical procedures to quantify surface irregularities and to determine how surface irregularities may affect specific categories of airplanes.

09-30-2009
150/5380-6B AAS-100 Guidelines and Procedures for Maintenance of Airport Pavements Provides guidelines and procedures for maintaining rigid and flexible airport pavements.

Because of the size of this document, it is available as one large file (see Complete) or as several smaller files (see Parts 1-3).
09-28-2007
150/5220-10E AAS-100 Guide Specification for Aircraft Rescue and Fire Fighting (ARFF) Vehicles

Provides an interactive specification that airports can use in procuring Aircraft Rescue and Fire Fighting (ARFF) vehicles. It describes the selection process, vehicle requirements, and how to produce formal specifications.

06-01-2011
150/5345-52A AAS-100 Generic Visual Glideslope Indicators (GVGI) Contains the FAA standards for generic visual glideslope indicators systems. GVGI systems provide pilots with visual glideslope guidance during approaches for landing at general aviation airports. 09-05-2007
150/5300-18B AAS-100 General Guidance and Specifications for Submission of Aeronautical Surveys to NGS: Field Data Collection and Geographic Information System (GIS) Standards

Provides the specifications for the collection of airport data for the FAA Airport Surveying – Geographic Information System (GIS) Program. Also explains how to submit data to the FAA, which will forward the safety critical data to the National Geodetic Survey (NGS) for independent verification and validation. The standards covered in this document provide critical information for the operation and safety of the National Airspace System (NAS) and are classified as critical by the International Civil Aviation Organization (ICAO). ICAO Annex 15 defines data as critical when “there is a high probability when using corrupted critical data that the continued safe flight and landing of an aircraft would be severely at risk with the potential for catastrophe.” The information furnished under these standards covers the entire spectrum of the FAA’s airport data requirements. See also FAA Airport Surveying - GIS Program and Airports GIS Video Training Series.

CHANGE 1 (02-24-2014)

This change incorporates updated airport data collection standards and deletes outdated information. These changes clarify airport data collection and ongoing Airports GIS and other system enhancements.

05-21-2009
150/5300-16A AAS-100 General Guidance and Specifications for Aeronautical Surveys: Establishment of Geodetic Control and Submission to the National Geodetic Survey

Explains the specifications for establishing geodetic control on or near an airport. It also describes how to submit the information to the National Geodetic Survey (NGS) for approval and inclusion in the National Spatial Reference System (NSRS) in support of aeronautical information surveys. See also Airports GIS Video Training Series.

09-15-2007
150/5220-23 AAS-100 Frangible Connections

Contains specifications for the frangible connections used to support objects located in airfield safety areas, including fuse bolts, special material bolts, frangible couplings, tear-through fasteners, and tear-out sections.

This AC is based on the performance standards, specifications, and recommendations contained in the International Civil Aviation Organization (ICAO) Aerodrome Design Manual, Part 6, Frangibility, and the U.S. Air Force (USAF) Engineering Technical Letter (ETL) 01-20: Guidelines for Airfield Frangibility Zones.

04-27-2009
150/5345-26D AAS-100 FAA Specification For L-823 Plug And Receptacle, Cable Connectors Contains the specification for plug and receptacle (cable connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport lighting systems. 09-30-2008
150/5300-7B AAS-300 FAA Policy on Facility Relocations Occasioned by Airport Improvements or Changes Reaffirms to the aviation community the FAA policy governing responsibility for funding relocation, replacement and modification of air traffic control and air navigation facilities that are made necessary by improvements or changes to the airport. 11-08-1972
150/5220-22B AAS-100 Engineered Materials Arresting Systems (EMAS) for Aircraft Overruns

Contains standards for the planning, design, installation, and maintenance of Engineered Materials Arresting Systems (EMAS) in runway safety areas (RSAs).

09-27-2012

26 - 50 of 75 results.

Export to MS Excel