« Back to Advisory Circulars main page

Will search within 'Airport Improvement Program (AIP)' only. Search all ACs.

51 - 75 of 84 results.

Export (CSV)

Search results
Number Office Title Date
150/5345-28G AAS-100 Precision Approach Path Indicator (PAPI) Systems

Contains the FAA standards for the Precision Approach Path Indicator (PAPI) systems, which provides pilots with visual glideslope guidance during approach for landing.

See also--

150/5370-12B AAS-100 Quality Management for Federally Funded Airport Construction Projects

This advisory circular (AC) provides information on the planning and oversight of construction projects at airports accomplished under the FAA's Airport Improvement Program (AIP). In addition to the previous version, this AC cancels:

  • AC 150/5300-9B, Predesign, Prebid, and Preconstruction Conferences for Airport Grant Projects
  • AC 150/5370-6D, Construction Progress and Inspection Report-Airport Improvement Program (AIP)

150/5370-16 AAS-100 Rapid Construction of Rigid (Portland Cement Concrete) Airfield Pavements
Provides guidance for the planning, coordination, management, design, testing, inspection, and execution of rapid construction of rigid (Portland Cement Concrete) airfield pavements. This AC focuses on rigid airfield pavement construction. The material contained herein also applies to other types of airfield improvements where rapid construction is identified as the preferred construction method.
150/5325-4B AAS-100 Runway Length Requirements for Airport Design
Provides design standards and guidelines for determining recommended runway lengths.
150/5395-1A AAS-100 Seaplane Bases

This AC provides guidance to assist operators in planning, designing, and constructing seaplane bases and associated facilities.

150/5340-5D AAS-100 Segmented Circle Airport Marker System

This AC provides standards for a system of airport marking consisting of certain pilot aids and traffic control devices.

150/5345-49C AAS-100 Specification L-854, Radio Control Equipment
Contains the specifications for radio control equipment to be used for controlling airport lighting facilities.
150/5345-42G AAS-100 Specification for Airport Light Bases, Transformer Housings, Junction Boxes, and Accessories

This AC contains the specifications for airport light bases, transformer housings, junction boxes, and accessories. This AC is not intended to be a compilation of currently available product designs. It provides the basic standard requirements for critical dimensions and performance requirements to which all manufacturers must demonstrate compliance.

150/5345-12F AAS-100 Specification for Airport and Heliport Beacons

Contains equipment specifications for light beacons that are used to locate and identify civil airports, military airports, seaplane bases, and heliports.

150/5345-10H AAS-100 Specification for Constant Current Regulators and Regulator Monitors

Contains a specification for constant current regulators (CCR) and a monitor for use with airport lighting circuits.

See also Engineering Brief 67, Light Sources Other than Incandescent and Xenon for Airport and Obstruction Lighting Fixtures.

150/5345-51B AAS-100 Specification for Discharge-Type Flashing Light Equipment

Contains the specifications for discharge-type flashing light equipment to be used for runway end identification lights (REIL) and for an omni-directional approach lighting system (ODALS).

See also Notice to Manufacturers of Airport Lighting and Navigation Aid Equipment about AIP Buy American Requirement (12/19/2011). The FAA is requesting information to determine if waivers to this requirement are needed.

150/5345-3G AAS-100 Specification for L-821, Panels for the Control of Airport Lighting

Provides the specified manufacturing requirements for panels used for remote control of airport lighting and auxiliary systems.

150/5345-7F AAS-100 Specification for L-824 Underground Electrical Cable for Airport Lighting Circuits

This AC provides specifications for L-824 underground electrical cable for airport lighting circuits.

150/5345-13B AAS-100 Specification for L-841 Auxiliary Relay Cabinet Assembly for Pilot Control of Airport Lighting Circuits
Contains the specification requirements for a relay cabinet used to control airfield lighting circuits. The L-841 consists of an enclosure containing a direct current (DC) power supply, control circuit protection and 20 pilot relays.
150/5345-39D AAS-100 Specification for L-853, Runway and Taxiway Retroreflective Markers

Contains the Federal Aviation Administration (FAA) standards for retroreflective markers for airport runways and taxiways. Version D changes Paragraph, Cylindrical Markers, to increase the marker diameter and surface area, and Paragraph, Mounting System, to clarify Type II marker mounting and tethering requirements.

Effective six months after the issue date of this AC, only equipment qualified per these specifications will be listed in AC 150/5345-53, Airport Lighting Equipment Certification Program.

150/5345-54B AAS-100 Specification for L-884, Power and Control Unit for Land and Hold Short Lighting Systems

Contains the FAA standards for power and control units for land and hold short lighting systems.

150/5345-56B AAS-100 Specification for L-890 Airport Lighting Control and Monitoring System (ALCMS)

Specifies the minimum requirements for an Airport Lighting Control and Monitoring System (ALCMS). The ALCMS simplifies the control and monitoring of lighted visual aids and enhances airport safety. The basic function of the system remains the same whether for a general aviation airport that supports only a few operations in a day or a large commercial airport which caters to hundreds of operations on any given day.

150/5345-55A AAS-100 Specification for L-893, Lighted Visual Aid to Indicate Temporary Runway Closure
Provides guidance in the design of a lighted visual aid to indicate temporary runway closure.
150/5345-43G AAS-100 Specification for Obstruction Lighting Equipment

This specification sets forth the FAA requirements for obstruction lighting equipment used to increase conspicuity of structures to permit early obstruction recognition by pilots.

150/5345-50B AAS-100 Specification for Portable Runway and Taxiway Lights
Contains the FAA standards for portable runway and taxiway lights and runway end identifier lights for temporary use to permit continued aircraft operations while all or part of a runway lighting system is inoperative.
150/5345-46D AAS-100 Specification for Runway and Taxiway Light Fixtures

Contains FAA specifications for in-pavement and elevated light fixtures used on airport runways and taxiways, including Runway Status Lights (RWSL), Takeoff Hold Lights (THL), Runway Intersection Lights (RIL), and Runway Entrance Lights (REL). See also--

150/5345-44K AAS-100 Specification for Runway and Taxiway Signs

This AC contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways. 

150/5345-47C AAS-100 Specification for Series to Series Isolation Transformers for Airport Lighting Systems

Contains the Federal Aviation Administration (FAA) specifications for series to series isolation transformers for use in airport lighting systems.

150/5345-27E AAS-100 Specification for Wind Cone Assemblies

This AC contains a specification for wind cone assemblies to be used to provide wind information to pilots. This revision revises the equipment qualification requirements to be furnished under the Federal grant assistance program for airports, applies photometric requirements for internally lighted wind cones to both Size 1 and Size 2 windsocks, and makes editorial changes.

150/5335-5C AAS-100 Standardized Method of Reporting Airport Pavement Strength - PCN

This AC provides guidance for using the standardized International Civil Aviation Organization (ICAO) method, called the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method, to report airport runway, taxiway, and apron pavement strength. Includes instructions for using the COMFAA program to calculate ACN values to determine PCN.

Also provides guidance for reporting changes to airport data that is generally published on Federal Aviation Administration (FAA) Form 5010, Airport Master Record, particularly those data elements associated with Gross Weight (Data Elements 35 through 38) and Pavement Classification Number (Data Element 39).

Access COMFAA and related Support Spreadsheet on our Airport Design Software page.


51 - 75 of 84 results.

Export (CSV)