« Back to Advisory Circulars main page

Will search within 'Design, Construction, and Maintenance - General' only. Search all ACs.

26 - 50 of 75 results.

Export (CSV)

Search results
Number Office Title Date
150/5345-46D AAS-100 Specification for Runway and Taxiway Light Fixtures

Contains FAA specifications for in-pavement and elevated light fixtures used on airport runways and taxiways, including Runway Status Lights (RWSL), Takeoff Hold Lights (THL), Runway Intersection Lights (RIL), and Runway Entrance Lights (REL). See also--

150/5320-6E AAS-100 Airport Pavement Design and Evaluation

Provides guidance to the public on the design and evaluation of pavements at civil airports.

Because of the size of the document, it is available as one large file (see Complete) or as four smaller files (see Parts 1-4).

See also related Airport Design Software.

150/5345-54B AAS-100 Specification for L-884, Power and Control Unit for Land and Hold Short Lighting Systems

Contains the FAA standards for power and control units for land and hold short lighting systems.

150/5380-9 AAS-100 Guidelines and Procedures for Measuring Airfield Pavement Roughness

Provides guidelines and procedures for measuring and evaluating runway roughness as identified by surface profile data of rigid and flexible airport pavements. Provides technical procedures to quantify surface irregularities and to determine how surface irregularities may affect specific categories of airplanes.

150/5340-18F AAS-100 Standards for Airport Sign Systems

Contains standards for the siting and installation of signs on airport runways and taxiways, including taxiway ending markers, location signs, runway distance remaining signs, mandatory hold signs associated with POFZ and CAT II/III operations, and many others.

See also Engineering Brief 89: Taxiway Nomenclature Convention.

150/5345-51B AAS-100 Specification for Discharge-Type Flashing Light Equipment

Contains the specifications for discharge-type flashing light equipment to be used for runway end identification lights (REIL) and for an omni-directional approach lighting system (ODALS).

See also Notice to Manufacturers of Airport Lighting and Navigation Aid Equipment about AIP Buy American Requirement (12/19/2011). The FAA is requesting information to determine if waivers to this requirement are needed.

150/5345-12F AAS-100 Specification for Airport and Heliport Beacons

Contains equipment specifications for light beacons that are used to locate and identify civil airports, military airports, seaplane bases, and heliports.

150/5345-3G AAS-100 Specification for L-821, Panels for the Control of Airport Lighting

Provides the specified manufacturing requirements for panels used for remote control of airport lighting and auxiliary systems.

150/5210-24 AAS-300 Airport Foreign Object Debris (FOD) Management

Provides guidance for developing and managing an airport foreign object debris (FOD) program.  In addition, this AC provides specifications for the equipment used in FOD removal operations.

The described program addresses prevention, detection, removal, and evaluation as well as strategies and practices that can help reduce FOD at airports. The guidelines presented in this AC are advisory and can be implemented at the discretion of the airport operator in accordance with the airport operator’s approved Airport Certification Manual.

This AC cancels AC 150/5380-5B, Debris Hazards at Civil Airports, dated July 5, 1996.

150/5220-17B AAS-100 Aircraft Rescue and Fire Fighting (ARFF) Training Facilities

Provides guidance on the design, construction, and operation of aircraft rescue and fire fighting (ARFF) training facilities.

150/5220-25 AAS-100 Airport Avian Radar Systems

Provides guidance on the use of avian radar systems to supplement an airport’s Wildlife Hazard Management Plan (WHMP) and reduce the potential avian threats to aircraft.

See also:

150/5370-17 AAS-100 Airside Use of Heated Pavement Systems

Establishes minimum performance requirements for the design, construction, inspection, and maintenance of heated pavement systems for use in the Aircraft Operations Area (AOA).

150/5220-16D AJW-14A Automated Weather Observing Systems(AWOS) for Non-Federal Applications

This advisory circular (AC) contains the Federal Aviation Administration’s (FAA) standard for the non-Federal AWOS. This AC applies to anyone proposing to design, procure, construct, install, activate or maintain an AWOS.

150/5220-10E AAS-100 Guide Specification for Aircraft Rescue and Fire Fighting (ARFF) Vehicles

Provides an interactive specification that airports can use in procuring Aircraft Rescue and Fire Fighting (ARFF) vehicles. It describes the selection process, vehicle requirements, and how to produce formal specifications.

150/5345-47C AAS-100 Specification for Series to Series Isolation Transformers for Airport Lighting Systems

Contains the Federal Aviation Administration (FAA) specifications for series to series isolation transformers for use in airport lighting systems.

150/5100-13B AAS-100 Development of State Standards for Nonprimary Airports

Provides guidelines for the development of State standards for and the use of State highway specifications for pavement construction at nonprimary public-use airports as provided for in title 49 United States Code (USC), Sections 47105(c) and 47114(d)(5), respectively.

150/5345-39D AAS-100 Specification for L-853, Runway and Taxiway Retroreflective Markers

Contains the Federal Aviation Administration (FAA) standards for retroreflective markers for airport runways and taxiways. Version D changes Paragraph, Cylindrical Markers, to increase the marker diameter and surface area, and Paragraph, Mounting System, to clarify Type II marker mounting and tethering requirements.

Effective six months after the issue date of this AC, only equipment qualified per these specifications will be listed in AC 150/5345-53, Airport Lighting Equipment Certification Program.

150/5345-28G AAS-100 Precision Approach Path Indicator (PAPI) Systems

Contains the FAA standards for the Precision Approach Path Indicator (PAPI) systems, which provides pilots with visual glideslope guidance during approach for landing.

See also--

150/5345-56B AAS-100 Specification for L-890 Airport Lighting Control and Monitoring System (ALCMS)

Specifies the minimum requirements for an Airport Lighting Control and Monitoring System (ALCMS). The ALCMS simplifies the control and monitoring of lighted visual aids and enhances airport safety. The basic function of the system remains the same whether for a general aviation airport that supports only a few operations in a day or a large commercial airport which caters to hundreds of operations on any given day.

150/5370-2F AAS-100 Operational Safety on Airports During Construction

Provides guidelines for operational safety on airports during construction. Principal changes include prohibiting construction in safety areas when associated runway or taxiway is open, providing guidance for incorporating safety risk management, and including checklists for writing Construction Safety and Phasing Plans (CSPP) and for daily inspections.

150/5370-11B AAS-100 Use of Nondestructive Testing in the Evaluation of Airport Pavements

Focuses on nondestructive testing (NDT) equipment that measures pavement surface deflections after applying a static or dynamic load to the pavement. It also briefly introduces other types of nondestructive measuring equipment to illustrate how supplementing NDT data with other test data may improve the quality and reliability of the pavement evaluation. This version updates Chapter 8, NDT-Based Evaluation and Design Updates, to reflect the requirements of the pavement design program FAARFIELD rather than the previous design program LEDFAA.

See also Airport Design Software.

150/5370-15B AAS-100 Airside Applications for Artificial Turf

Provides guidance for the planning, design, installation, and maintenance of aviation grade artificial turf in areas adjacent to the operational areas of an airport.

150/5390-2C AAS-100 Heliport Design

Provides standards for the design of heliports serving helicopters with single rotors. Basic concepts can also be applied to facilities serving helicopters with tandem (front and rear) or dual (side by side) rotors; although many standards will not apply to these facilities.

This version adds guidance for pavement or structure larger than the touchdown and liftoff area (TLOF), but less than the size of the final approach and take off (FATO); turbulence effects; clearance between parking areas and taxi routes and within parking areas; minimum dimensions of curved approach/departure airspace; Touchdown/Positioning Circle (TDPC) Marking; Flight Path Alignment Guidance markings and lights; Emergency Helicopter Landing Facility Requirements (EHLF); FATO to FATO separation distance for simultaneous operations; revised standards for size of “H” for general aviation heliports; increased TLOF size when the FATO of a hospital heliport is not load bearing; and Heliport Protection Zone (HPZ) for hospital heliports. See "Principal Changes" for a complete list.

150/5220-21C AAS-100 Aircraft Boarding Equipment

Contains the FAA's performance standards, specifications, and recommendations for the design, manufacture, testing and maintenance of equipment used in the boarding of airline passengers. The physical area covered in this AC is that which is bounded by the door of the passenger terminal area, on one end, to the door of the aircraft, on the other end. Although this AC refers only to aircraft boarding (enplaning), all references apply equally to disembarking (deplaning) with the described procedures occurring in reverse order.

The previous version of this AC discussed only the passenger lift scenario and associated equipment. This document updates that effort and addresses the other methods and equipment used to board an aircraft, including passenger boarding bridges, ramps, lifts, and aircraft boarding chairs.

150/5345-53D AAS-100 Airport Lighting Equipment Certification Program

This AC describes the Airport Lighting Equipment Certification Program (ALECP). It provides information on how an organization can get Federal Aviation Administration (FAA) acceptance as a third-party certification body (third-party certifier) and how manufacturers may get equipment qualified under the program. It includes a list of the equipments that are certified under the program. This AC does not impose requirements or mandate participation in the ALECP by any party. This revision clarifies the criteria that FAA will use to determine whether a certification body qualifies for participation and how equipment may be qualified.


26 - 50 of 75 results.

Export (CSV)