Specification for Wind Cone Assemblies
Date Cancelled: 06-02-2004
Structural Substantiation of Secondary Structures
Date Cancelled: 01-27-2003
Cancelled By: 23-19
Quality Control of Construction for Airport Grant Projects
Provides information to ensure the quality of construction accomplished under the FAA Airports grant program.
Date Cancelled: 09-29-2007
Nationally Scheduled FAA-Approved Industry-Conducted Flight Instructor Refresher Clinics (FIRC)
Provides guidance for the preparation of training course outlines (TCO) for FAA-approved industry conducted FIRC’s under Amendment 61-25 to the FAR
Date Cancelled: 11-19-2001
Cancelled By: 61-83E
Means of Compliance with Section 23.629, "Flutter"
Date Cancelled: 09-28-2004
Cancelled By: 23.629-1B
Installation, Removal, or Change of Identification Data and Identification Plates on Aircraft
Provides information and guidance concerning the installation, removal, or change of identification data and identification plates on aircraft engines, and identifies an acceptable means, but not the only means, of compliance with FAR Part 45.
Date Cancelled: 08-03-2010
Minimum Standards for Commercial Aeronautical Activities on Public Airports
Date Cancelled: 06-10-2002
Cancelled By: 150/5190-5
Qualification of Fuels
Provides acceptable procedures for approving the qualification of fuels, lubricants, and additives for use in certificated aircraft engines.
Date Cancelled: 07-29-2011
|150/5340-17B||AAS-200||Standby Power for Non-FAA Airport Lighting Systems (Cancelled)||01-06-1986|
|150/5340-27A||AAS-200||Air-To-Ground Radio Control of Airport Lighting Systems (Cancelled)||03-04-1986|
Flight Test Guide for Certification of Transport Category Airplanes
Date Cancelled: 06-06-1995
|23-4||ACE-111||Static Strength Substantiation of Attachment Points for Occupant Restraint System Installations (Cancelled)||06-20-1986|
Painting, Marking, and lighting of Vehicles used on and Airports
Provides guidance, specifications, and standards, in the interest of airport personnel safety and operational efficiency, for painting, marking, and lighting of vehicles operating in the airport air operations areas.
Date Cancelled: 08-31-2007
|23-5||ACE-111||Cutouts in a Modified Fuselage of Small Airplanes (Cancelled)||08-06-1986|
Specification for L-841 Auxiliary Relay Cabinet Asembly for Pilot Control of Airport Lighting Circuits
Contains the specification requirements for a relay cabinet used to control airfield lighting circuits. The L-841 consists of an enclosure containing a DC power supply, control circuit protection, and 20 pilot relays.
Date Cancelled: 09-20-2007
Specification L-854, Radio Control Equipment
Contains the specification for radio control equipment to be used for controlling airport lighting facilities.
Date Cancelled: 09-15-2005
Labor Requirements for the Airport Improvement Program (AIP)
Encompasses the basic labor and associated requirements for the airport grant program. It is intended for sponsors using program assistance and for contractors and subcontractors working on projects under the program.
This AC is superseded by more current AIP labor requirements found in 49 Code of Federal Regulatios Part 18.36 (Procurement).
Date Cancelled: 03-05-2012
Fuselage Doors, Hatches, and Exits
Sets forth acceptable means of compliance with the provisions of Part 25 of the Federal Aviation Regulations (FAR) dealing with the certification requirements of fuselage doors. Guidance information is provided for showing compliance with structural and functional safety standards for doors and their operating systems. The intent of the requirements and some acceptable means of compliance are discussed. Other means are acceptable if they meet the intent of the regulations. For the propose of showing compliance with section 25.783 of FAR, hatches and exits are also considered to be doors.
Date Cancelled: 04-25-2005
Cancelled By: 25.783-1A
|23-6||ACE-111||Interpretation of Failure for Static Structural Test Programs (Cancelled)||02-17-1987|
Guidance for Installation of Miscellaneous, Nonrequired Electrical Equipment
This advisory circular (AC) sets forth a method of compliance with the requirements of Part 25 of the Federal Aviation Regulations (FAR) pertaining to installations of miscellaneous, nonrequired electrical equipment in transport category airplanes. It is for guidance purposes and provides an example of a method of compliance that has been found acceptable. Because the method of compliance presented in this AC is not mandatory, the terms "shall" and "must" used in this AC apply only to an applicant who chooses to follow this particular method without deviation. The applicant may elect to follow an alternate method provided the alternate method is also found acceptable by the FAA.
Date Cancelled: 07-22-2010
Application for U.S. Airworthiness Certificate, FAA Form 8130-6 (OMB 2120-0018)
Date Cancelled: 11-06-2001
Cancelled By: 21-12B
Airframe and Powerplant Mechanics Certification Information
Date Cancelled: 11-09-2001
Cancelled By: 65-30A
|150/5000-7||APP-400||Report No. DOT/FAA/PP/87-1 Measuring the Regional Economic Significance of Airports (Cancelled)||05-12-1987|
High-Speed Tire Maintenance and Operational Practices
Provides information and guidance for maintaining aircraft tires to ensure their continued airworthiness.
Date Cancelled: 04-18-2005
Cancelled By: 20-97B
Instructions for Completion of FAA Form 337 (OMB No. 2120-0020), Major Repair and Alteration (Airframe, Powerplant, Propeller, or Appliance)
Date Cancelled: 01-25-2007
Cancelled By: 43.9-1F