|150/5345-45C||AAS-100||Low-Impact Resistant (LIR) Structures Contains the FAA specifications for low-impact resistant (LIR) structures used to support approach lighting systems (ALS) at airports.||04-06-2007|
Airport Master Plans
Provides guidance for the preparation of airport master plans that range in size and function from small general aviation to large commercial service facilities. Appendix D of this AC cancels Chapter 1, Section 5; Appendix 6; and Appendix 7 of AC 150/5300-13, Airport Design. Consolidated file contains Changes 1 and 2.
|150/5200-29A||AAS-300||Announcement Of Availability Of Airport Self-Inspection DVD Announces the availability of the Airport Safety Self-Inspection DVD, which replaces the previously issued videotape. It also corrects a previously released announcement, dated January 31, 2007, that was incorrectly numbered AC 150/5200-18C.||06-05-2007|
|150/5345-49C||AAS-100||Specification L-854, Radio Control Equipment Contains the specifications for radio control equipment to be used for controlling airport lighting facilities.||06-27-2007|
|150/5345-55A||AAS-100||Specification for L-893, Lighted Visual Aid to Indicate Temporary Runway Closure Provides guidance in the design of a lighted visual aid to indicate temporary runway closure.||06-27-2007|
|150/5200-33B||AAS-300||Hazardous Wildlife Attractants On or Near Airports Provides guidance on certain land uses that have the potential to attract hazardous wildlife on or near public-use airports. It also discusses airport development projects (including airport construction, expansion, and renovation) affecting aircraft movement near hazardous wildlife attractants.||08-28-2007|
|150/5345-52A||AAS-100||Generic Visual Glideslope Indicators (GVGI) Contains the FAA standards for generic visual glideslope indicators systems. GVGI systems provide pilots with visual glideslope guidance during approaches for landing at general aviation airports.||09-05-2007|
|150/5220-18A||AAS-100||Buildings for Storage and Maintenance of Airport Snow and Ice Control Equipment and Materials Provides guidance for the site selection and design of buildings used to store and maintain airport snow and ice control equipment, store approved materials, and provide personnel areas required to support the requirements under the airport operator’s winter storm management plan.||09-14-2007|
General Guidance and Specifications for Aeronautical Surveys: Establishment of Geodetic Control and Submission to the National Geodetic Survey
Explains the specifications for establishing geodetic control on or near an airport. It also describes how to submit the information to the National Geodetic Survey (NGS) for approval and inclusion in the National Spatial Reference System (NSRS) in support of aeronautical information surveys. See also Airports GIS Video Training Series.
|150/5345-13B||AAS-100||Specification for L-841 Auxiliary Relay Cabinet Assembly for Pilot Control of Airport Lighting Circuits Contains the specification requirements for a relay cabinet used to control airfield lighting circuits. The L-841 consists of an enclosure containing a direct current (DC) power supply, control circuit protection and 20 pilot relays.||09-20-2007|
|150/5345-50B||AAS-100||Specification for Portable Runway and Taxiway Lights Contains the FAA standards for portable runway and taxiway lights and runway end identifier lights for temporary use to permit continued aircraft operations while all or part of a runway lighting system is inoperative.||09-20-2007|
|150/5050-8||APP-400||Environmental Management Systems for Airport Sponsors Provides guidance to airport sponsors that develop Environmental Management Systems (EMS). It provides guidance to airport sponsors on the needed parts of an EMS.||09-26-2007|
|150/5370-16||AAS-100||Rapid Construction of Rigid (Portland Cement Concrete) Airfield Pavements Provides guidance for the planning, coordination, management, design, testing, inspection, and execution of rapid construction of rigid (Portland Cement Concrete) airfield pavements. This AC focuses on rigid airfield pavement construction. The material contained herein also applies to other types of airfield improvements where rapid construction is identified as the preferred construction method.||09-28-2007|
Aircraft Rescue and Fire Fighting Communications
Provides guidance to assist airport operators in preparing for Aircraft Rescue and Fire Fighting (ARFF) communications.
Announcement Of Availability: RTCA Inc., Document RTCA-221
Announces the availability of RTCA, Inc., Document RTCA/DO-221, Guidance and Recommended Requirements for Airport Surface Movement Sensors, dated April 24, 1994. Provides recommended minimum performance standards for airport surface movement sensors and specifies both sensor and system characteristics that provide guidance to airport systems designers, manufacturers, installers, and users of the equipment.
Cancels AC 150/5000-13, Announcement of Availability-RTCA Inc., Document RTCA-221, dated September 7, 1994.
|150/5320-15A||AAS-100||Management Of Airport Industrial Waste Provides basic information on the characteristics, management, and regulations of industrial wastes generated at airports. Provides guidance for the development of a Storm Water Pollution Prevention Plan (SWPPP) that applies best management practices to eliminate, prevent, or reduce pollutants in storm water runoff associated with particular airport industrial activities.||09-08-2008|
|150/5210-15A||AAS-100||Aircraft Rescue and Firefighting Station Building Design Contains information, references and guidelines for construction of Aircraft Rescue and Fire Fighting (ARFF) station building design.||09-10-2008|
|150/5210-18A||AAS-100||Systems for Interactive Training Of Airport Personnel Provides guidance in the design of systems for interactive training of airport personnel, which are eligible for funding under the Airport Improvement Program (AIP) and with Passenger Facility Charge (PFC) revenues.||09-29-2008|
Aircraft Rescue Fire Fighting Equipment, Tools and Clothing
Contains references to the minimum requirements for the selection and performance of aircraft rescue and firefighting personal protective equipment (PPE), self contained breathing apparatus (SCBA), and powered rescue tools. Designed to assist airport management in the development of local procurement specifications for airport fire departments.
|150/5300-15A||AAS-100||Use Of Value Engineering For Engineering And Design Of Airport Grant Projects Provides guidance on using value engineering (VE) in airport projects funded under the Federal Aviation Administration's (FAA's) Airport Grant program.||09-30-2008|
|150/5345-26D||AAS-100||FAA Specification For L-823 Plug And Receptacle, Cable Connectors Contains the specification for plug and receptacle (cable connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport lighting systems.||09-30-2008|
Airport Winter Safety and Operations
This advisory circular (AC) provides guidance to assist airport operators in developing a snow and ice control plan, conducting and reporting runway friction surveys, and establishing snow removal and control procedures. Version B of this AC cancelled AC 150/5220-13B, Runway Surface Condition Sensor Specification Guide, dated March 27, 1991. Consolidated file contains Change 1.
See also Notice to Manufacturers of Airport In-Pavement Stationary Runway Weather Information Systems about AIP Buy American Requirement (10/28/2011). The FAA is requesting information to determine if waivers to this requirement are needed.
Contains specifications for the frangible connections used to support objects located in airfield safety areas, including fuse bolts, special material bolts, frangible couplings, tear-through fasteners, and tear-out sections.
Specification for Runway and Taxiway Light Fixtures
Contains FAA specifications for in-pavement and elevated light fixtures used on airport runways and taxiways, including Runway Status Lights (RWSL), Takeoff Hold Lights (THL), Runway Intersection Lights (RIL), and Runway Entrance Lights (REL). See also--
General Guidance and Specifications for Submission of Aeronautical Surveys to NGS: Field Data Collection and Geographic Information System (GIS) Standards
Provides the specifications for the collection of airport data for the FAA Airport Surveying – Geographic Information System (GIS) Program. Also explains how to submit data to the FAA, which will forward the safety critical data to the National Geodetic Survey (NGS) for independent verification and validation. The standards covered in this document provide critical information for the operation and safety of the National Airspace System (NAS) and are classified as critical by the International Civil Aviation Organization (ICAO). ICAO Annex 15 defines data as critical when “there is a high probability when using corrupted critical data that the continued safe flight and landing of an aircraft would be severely at risk with the potential for catastrophe.” The information furnished under these standards covers the entire spectrum of the FAA’s airport data requirements. See also FAA Airport Surveying - GIS Program and Airports GIS Video Training Series.
Note: We have re-activated this AC until further notice. Please see the letter cancelling AC 150/5300-18C and re-activating AC 150/5300-18B.