Reciprocating Engine Overhaul Terminology and Standards - Including Change 1
This advisory circular (AC) discusses engine overhaul terminology and standards used in the aviation industry. This AC will:
a. Inform owners or operators of the variety of terms used to describe types of reciprocating engine overhaul;
b. Clarify the standards used by the industry during reciprocating engine overhaul; an
c. Review Title 14 of the Code of Federal Regulations (14 CFR) regarding engine records and standards.
|43-14||AFS-350||Maintenance of Weather Radar Radomes Provides guidance material useful to repair facilities in the maintenance of weather radomes.||02-24-1977|
|43-15||AFS-350||Recommended Guidelines for Instrument Shops Provides guidelines concerning environmental conditions for instrument repair and overhaul shops and information on calibration of test equipment. Provides information on obtaining printed copies of this document or electronic access to it. Provides information on obtaining printed copies of this document or electronic access to it.||08-15-1977|
|43-2B||AFS-343||Minimum Barometry for Calibration and Test of Atmospheric Pressure Instruments Provides guidance material which may be used to determine the adequacy of barometers used in the calibration of aircraft static instruments and presents information concerning the general operation, calibration, and maintenance of such barometers.||10-16-1980|
This advisory circular (AC) provides information concerning preventive maintenance,including who may perform it, the standards of performance applicable to it, authority for approval for return to service, and the applicable recording requirements. This AC clarifies those areas most frequently misunderstood in the past.
Describes methods, procedures and practices determined to be acceptable for showing compliance with the general aviation maintenance record-making and record-keeping requirements of Title 14 of the Code of Federal Regulations (14 CFR) parts 43 and 91. This material is issued for guidance and outlines several methods of compliance with the regulations.
Acceptable Methods, Techniques, and Practices - Aircraft Inspection and Repair [Large AC. This includes Change 1.]
This advisory circular (AC) contains methods, techniques, and practices acceptable to the Administrator for the inspection and repair of nonpressurized areas of civil aircraft, only when there are no manufacturer repair or maintenance instructions. This data generally pertains to minor repairs. The repairs identified in this AC may only be used as a basis for FAA approval for major repairs. The repair data may also be used as approved data, and the AC chapter, page, and paragraph listed in block 8 of FAA form 337 when:
a. the user has determined that it is appropriate to the product being repaired;
b. it is directly applicable to the repair being made; and
c. it is not contrary to manufacturer’s data.
|43-206||AFS-300||Inspection, Prevention, Control, and Repair of Corrosion on Avionics Equipment AC contains acceptable methods, techniques, and practices for inspection, prevention, control and repair of corrosion on avionic systems and equipment.||05-30-2001|
|43-207||AFS-340||Correlation, Operation, Design, and Modification of Turbofan/Jet Engine Test Cells Provides guidance regarding test cell correlation procedures for test cells used for in-service acceptance testing of turbofan and turbojet engines. This AC discusses the effects of the design, operation, and modification of a test cell and engine test hardware on engine performance. The AC also provides guidance on conducting, evaluating, and maintaining test cell correlation. Like all advisory material, this AC is not in itself mandatory and does not constitute a regulation. The Federal Aviation Administration (FAA) issues it to describe an acceptable means, but not the only means, for correlating and maintaining a satisfactory correlation status of a test cell.||12-26-2002|
Maintenance of Emergency Evacuations Systems for Aircraft Operating Under Part 121
This advisory circular (AC) provides information and guidance for the maintenance of emergency evacuation systems (EES) used on aircraft operating under the provisions of Title 14 of the Code of Federal Regulations (14 CFR) part 121. Additionally, this AC discusses the responsibilities and means of compliance for the air carrier and persons performing maintenance. EES include components of all aircraft slide-equipped exits affecting the emergency egress function (e.g., slides, slide/rafts, exit doors, exit door or hatch mechanisms, exit door or hatch opening assist mechanisms, tail cone release mechanisms, arm/disarm mechanisms, slide activation mechanisms, electronic slide monitoring systems, and slide-to-airframe attachments).
Fabrication of Aircraft parts by Maintenance Personnel
This advisory circular (AC) ensures that parts fabricated during maintenance and alteration have an equivalent level of safety as those parts produced under the original design holder’s production certificate. This AC provides one means of complying with the requirements of Title 14 of the Code of Federal Regulations (14 CFR) parts 21 and 43 for the design and fabrication of parts by persons performing maintenance and alterations using methods, techniques, and practices acceptable to the Administrator. As required by regulations, such parts fabrication and their implementation must be accomplished "in such a manner...that the condition of the aircraft, airframe, aircraft engine, propeller, or appliance worked on will be at least equal to its original or properly altered condition." This AC is not mandatory and does not constitute a regulation. It outlines one method (but not the only method) of compliance with the rules. A person may elect to follow an alternative method, provided the Federal Aviation Administration (FAA) finds the alternative method to be an acceptable means of complying with the applicable requirements of 14 CFR.
Instructions for Completion of FAA Form 337
This advisory circular (AC) provides instructions for completing Federal Aviation Administration (FAA) Form 337, Major Repair and Alteration (Airframe, Powerplant, Propeller, or Appliance).
|43.13-2B||AFS-300||Acceptable Methods, Techniques, and Practices - Aircraft Alterations||03-03-2008|
United States—Canadian Bilateral Aviation Safety Agreement Maintenance Implementation Procedures
This advisory circular (AC) provides information relating to the Bilateral Aviation Safety Agreement (BASA) and accompanying Maintenance Implementation Procedures (MIP) between the United States and Canada. This AC is not mandatory and does not constitute a regulation. This AC presents recommendations for an acceptable means, but not the only means, to comply with the current revision of the MIP.
Recommended Inspection Procedures for Former Military Aircraft
This advisory circular (AC) is for the development of inspection program requirements for the certification of former military aircraft in the experimental category for the purpose(s) of exhibition and air racing that operate in the United States in accordance with Title 14 of the Federal Code of Regulations (14 CFR) part 21, § 21.191(d) and (e). This AC is not mandatory and does not constitute a regulation. This AC describes an acceptable means, but not the only means, for developing inspection program requirements for former military aircraft.
Parts Marking Identification - Including Change 1
This advisory circular (AC) provides information and guidance on developing procedures for part marking and part re-marking when performing maintenance, alteration, and fabrication, including the fabrication of owner- or operator-produced parts.
|43-211A||AFS-300||Recommended Alternative Inspection Schedule for Daher (Socata) TBM Series Aircraft This advisory circular (AC) recommends an inspection schedule for owners of Daher (Socata) TBM Series aircraft. If aircraft owners/operators and maintenance providersinspect aircraft under a progressive inspection program, this AC will help ensure they comply with Title 14 of the Code of Federal Regulations (14 CFR) part 91, § 91.409. While this AC provides one way of addressing progressive inspections of TBM Series aircraft, it may not be the only way.||01-29-2016|
|43-214A||AFS-300||Repairs and Alterations to Composite and Bonded Aircraft Structure This advisory circular (AC) provides information and guidance concerning an acceptable means, but not the only means, of demonstrating compliance with the requirements of Title 14 of the Code of Federal Regulations (14 CFR) parts 21, 23, 25, 26, 27, 29, 31, 33, 35, 43, 91, 121, 125, 129 (U.S.-registered airplanes), 133, 135, 137, and 145 regarding procedures and facilities for repairs and alterations of structures consisting of adhesively-bonded (including metal bond) and fiber-reinforced materials (e.g., carbon, aramid, and glass-reinforced polymeric materials mentioned in the current edition of AC 20-107, Composite Aircraft Structure). The information in this AC is applicable to repairs and alterations of bonded and composite structures, whether it is a damaged part that can be removed from the airplane for repairs, or repairs and alterations on the aircraft itself. Examples include repair patches, on-wing bonded repairs, and fabrication and bonding of replacement parts. The Federal Aviation Administration (FAA) will consider any other method of compliance that the applicant elects to present. This AC uses mandatory terms such as “must” only in the sense of ensuring the applicability of these particular methods of compliance when using the acceptable means of compliance (AMC) described herein. This AC does not change regulatory requirements and does not authorize changes in, or deviations from, regulatory requirements.||07-23-2016|
Standardized Procedures for Obtaining Approval of Data Used in the Performance of Major Repairs and Major Alterations - Change 1
This advisory circular (AC) describes a standardized procedure for requesting approval of technical data associated with major repairs/major alterations. This AC also provides information that can help determine if a proposed repair/alteration requires approved data, guidance and standardized procedures for obtaining field approval (or approval by other means) of data, and instructions for completing the field approval checklist. This AC is not mandatory and does not constitute a regulation. This AC describes an acceptable means, but not the only means, to obtain approved data for a major repair or major alteration. However, if you—whether you’re an aircraft owner, operator, or Aviation Maintenance Technician (AMT), collectively termed an applicant—use the means described in the AC, you must follow it in all important respects.
|43-6D||AFS-300||Altitude Reporting Equipment and Transponder System Maintenance and Inspection Practices This advisory circular (AC) provides information concerning acceptable methods of testing altimeters, static systems, altitude encoders, and air traffic control (ATC) transponder systems (ATCTS). This guidance also applies to the above articles, but does not include all requirements for testing the article, when part of 1090 megahertz (MHz) Extended Squitter (ES) or Universal Access Transceiver (UAT) Automatic Dependent Surveillance-Broadcast (ADS-B) systems. Like all advisory material, this AC is not in itself mandatory and does not constitute a regulation. It provides a means, but not the only means, of testing at the time of original installation, after performing repairs, or during scheduled recertification. Where indicated, this AC ensures compliance with regulatory requirements. Operators may elect to follow an alternative method that the Federal Aviation Administration (FAA) has found acceptable.||02-15-2017|
|43-4B||AFS-300||Corrosion Control for Aircraft This advisory circular (AC) is a summary of the current available data regarding identification and treatment of corrosive attack on aircraft structures and engine materials. Corrosion inspection frequency, corrosion identification, and especially corrosion treatment continues to be the responsibility of the operator. These inspections should be accomplished per this AC, the manufacturer’s recommendations, or the operator’s own maintenance program. The procedures in this AC are an acceptable means, but not the only acceptable means, of corrosion treatment. The information in this AC is applicable to aircraft for which the manufacturer has not published corrosion control information. Where the airframe or engine manufacturer has published a recommended corrosion inspection schedule and treatment program, the applicable program must take precedence over the recommendation of this AC.||09-11-2018|