|120-78||AFS-300||Acceptance and Use of Electronic Signatures, Electronic Recordkeeping Systems, and Electronic Manuals This AC provides guidance on the acceptance and use of electronic signatures to satisfy certain operational and maintenance requirements. This AC also provides guidance on the acceptability of electronic recordkeeping systems and electronic maintenance manuals, including inspection procedures manuals, quality, operations manuals, and training manuals required by Title 14 of the Code of Federal Regulations (14 CFR).||10-29-2002|
|120-54A||AFS-230||Advanced Qualification Program Provides FAA guidance for approval of an Advanced Qualification Program (AQP) under SFAR 58.||06-23-2006|
Aging Aircraft Inspections and Records Reviews
This advisory circular (AC) provides guidance pertaining to aging aircraft inspections and records reviews accomplished to satisfy the requirements of the Aging Aircraft Safety Final Rule. This information represents an acceptable way, but not the only way, for an aging airplane inspection and records review to be conducted. However, if you use the means described in this AC, you must follow it in all important aspects.
Change 1 dated 01/15/2009
Air Cargo Operations
This advisory circular (AC) provides operators with recommended procedures for managing cargo operations. Developing and using these comprehensive procedures is key to establishing a safe and efficient cargo operation. The AC provides guidance for aircraft cargo loading systems (CLS), restraints, special cargo, and unit load devices (ULD)This AC is not mandatory and does not constitute a regulation. This AC describes an acceptable means, but not the only means, of complying with applicable regulations to manage cargo operations.
|120-44A||AFS-203||Air Carrier First Aid Programs Provides guidance about first aid program resources, subjects, equipment, and pertinent regulations. This revision adds information about blood borne pathogen awareness programs.||06-06-2001|
|120-59A||AFS-230||Air Carrier Internal Evaluation Programs Provides information and guidance material that may be used by air carrier certificate holders, operating under Federal Aviation Regulations (FAR) Parts 121 and 135, to design or develop an Internal Evaluation Program. The procedures and practices outlined in this (AC can be applied to maintenance, flight operations, and security aspects of an air carrier’s organization. Internal evaluation guidance for certificate holders other than those operating under FAR Pars 121 and 135 may be issued separately in the future.||04-17-2006|
Air Carrier Maintenance Programs
This advisory circular (AC) explains what the term "maintenance program" means. Our explanation describes the scope and content of air carrier aircraft maintenance programs. This is important as there is a significant difference between an air carrier maintenance program and an inspection program used in non-air carrier maintenance operations. We explain the background of these programs as well as the Federal Aviation Administration’s (FAA) regulatory requirements. We also describe and explain each of the 10 elements of air carrier maintenance programs. When we use "must" or "will" in this AC, we are referencing actual regulatory requirements. When we use "we," "us," or "our" in this AC, we mean the FAA. When we use "you," "your," or "yours," we mean you, the air carrier. When we use the term "person," it has the same meaning as that in Title 14 of the Code of Federal Regulations (14 CFR) part 1, § 1.1.
Air Carrier Operational Approval and Use of TCAS II
This advisory circular (AC) provides an acceptable, but not the only, means to address Traffic Alert and Collision Avoidance System (TCAS) issues related to installation and use of TCAS II regarding compliance with Title 14 of the Code of Federal Regulations (14 CFR) parts 121, 125, and 129 requirements for air carriers.
|120-32||AFS-223||Air Transportation of Handicapped Persons Identifies some of the problems handicapped air travelers face and provides some guidelines to airline personnel to help alleviate these problems.||03-25-1977|
|120-94||ANM-100||Aircraft Electrical Wiring Interconnection Systems Training Program||11-20-1997|
Aircraft Secondary Barriers and Alternate Flight Deck Security Procedures
This advisory circular (AC) calls attention to RTCA Document (RTCA/DO-329) Aircraft Secondary Barriers and Alternative Flight Deck Security Procedures, as guidance to achieve effective protection of the flight deck as required by Title 14 of the Code of Federal Regulations (14 CFR) part 121 § 121.584(1)(a).
This AC is not mandatory and does not constitute a regulation. It describes an acceptable means, but not the only means, to comply with pertinent regulatory requirements.
|120-27E||AFS-200/AFS-300||Aircraft Weight and Balance Control Provides one means, but not the only means, for obtaining approval of a weight and balance control system. It provides guidance to certificate holders that are required to have an approved weight and balance program by Title 14, Code of Federal Regulations (14 CFR) Part 121 or choose to have an approved program under 14 CFR Part 135.||06-10-2005|
|120-45A||AFS-205||Airplane Flight Training Device Qualification Provides an acceptable means of ensuring compliance with the FAR regarding the evaluation and qualification of all training devices in which flight training, qualification, or certification of airmen under Title 14, Code of Federal Regulations, is accomplished. Specifies the criteria to be used by the FAA when qualifying a device and determining what the qualification level should be.||02-05-1992|
|120-40B||AFS-205||Airplane Simulator Qualification Provides an acceptable means, but not the only means, of compliance with the Federal Aviation Regulations (FAR) regarding the evaluation of and qualification of airplane simulators used in training programs or airmen checking under Title 14 Code of Federal Regulations (CFR).||07-29-1991|
|120-91||AFS-400||Airport Obstacle Analysis Describes acceptable methods and guidelines for developing takeoff and initial climb-out airport obstacle analyses and in-flight procedures to comply with the intent of the regulatory requirements of Title 14 of the Code of Federal Regulations part 121,§§ 121.177, 121.189, and part 135, §§ 135.367, 135.379 and powered airplanes operated under parts 121 and 135||05-05-2006|
|120-66B||AFS-230||Aviation Safety Action Program (ASAP) This AC provides guidance for establishing an air transportation Aviation Safety Action Program (ASAP). This objective of the ASAP is to encourage air carrier and repair station employees to voluntarily report safety information that may be critical to identifying potential precursors to accidents. Under ASAP, safety issues are not resolved through punishment or discipline.||11-15-2002|
Basics of Aviation Fatigue
Summarizes the content of the FAA international symposium on fatigue, “Aviation
Fatigue Management Symposium: Partnerships for Solutions”, June 17-19, 2008;
Describes fundamental concepts of human cognitive fatigue and how it relates to safe Provides information on conditions that contribute to cognitive fatigue; and fatigue and/or mitigate the effects of fatigue. Provides information on how individuals and aviation service providers can reduce performance of duties by employees in the aviation industry;
|120-49||AFS-200||Certification of Air Carriers Provides information and guidance material on the certification process of air carriers under FAR Part 121 and Part 135. It provides information that can be used by applicants who desire to be certificated as an air carrier in accordance with FAR Part 121 and Part 135.||11-23-1988|
|120-48||AFS-220||Communication and Coordination Between Flight Crewmembers and Flight Attendants Presents information on common problems associated with crew coordination between flight crewmembers and flight attendants and how these problems can be avoided.||07-13-1988|
Continuous Descent Final Approach
This advisory circular provides guidance for all operators using the continuous descent final approach (CDFA)technique while conducting a nonprecision Approach (NPA) procedure. It describes the rationale for using the CDFA Technique, as well as recommended general procedures and training.
|120-51E||AFS-210||Crew Resource Management Training Provides FAA guidance for approval of an Advanced Qualification Program (AQP) under SFAR 58.||01-22-2004|
|120-29A||AFS-400||Criteria for Approval of Category I and Category II Weather Minima for Approach This AC provides an acceptable means, but not the only means, for obtaining and maintaining approval of CAT I & II Weather Minima including the installation and approval of associated aircraft systems.||08-12-2002|
|120-28D||AFS-400||Criteria for Approval of Category III Weather Minima for Takeoff, Landing, and Rollout States an acceptable means, not the only means, for obtaining approval of Category III Landing Weather Minima and low visibility takeoff, including the installation and approval of associated aircraft systems.||07-13-1999|
|120-41||AFS-400||Criteria for Operational Approval of Airborne Wind Shear Alerting and Flight Guidance Establishes an acceptable means, but not the only means, of obtaining operational approval of an airborne wind shear alerting and flight guidance system. It describes acceptable simulation test criteria, wind field modeling data, and minimum performance parameters for evaluating candidate systems.||11-07-1983|
|120-73||ANM-100||Damage Tolerance Assessment of Repairs to Pressurized Fuselages Provides guidance to operators of certain transport category airplanes operated under 14 CFR Parts 91, 121, 125, and 129. The guidance provides an acceptable means of compliance with the regulations that require incorporating FAA-approved “repair assessment guidelines” into an operator’s FAA-approved maintenance or inspection program. The means of compliance described is intended to provide guidance to supplement the engineering and operational judgment that must form the basis of any compliance findings relative to repair assessments for pressurized fuselages.||12-14-2000|