« Back to Advisory Circulars main page

Will search within "Design, Construction, and Maintenance - General" only. Search all ACs.

1 - 25 of 75 results.

Export to MS Excel

Search results
Number Office Title Date
150/5000-13A AAS-100 Announcement Of Availability: RTCA Inc., Document RTCA-221 Announces the availability of RTCA, Inc., Document RTCA/DO-221, Guidance and Recommended Requirements for Airport Surface Movement Sensors, dated April 24, 1994. Provides recommended minimum performance standards for airport surface movement sensors and specifies both sensor and system characteristics that provide guidance to airport systems designers, manufacturers, installers, and users of the equipment.

Cancels AC 150/5000-13, Announcement of Availability-RTCA Inc., Document RTCA-221, dated September 7, 1994.
150/5000-15B AAS-100 Announcement of Availability of Airport-Related Research and Development Products

This AC explains how to obtain the latest airport-related research and development (R&D) products funded by the Federal Aviation Administration’s (FAA’s) Airports Organization, particularly the FAA’s Airport Technology Research and Development Branch, the Airport Cooperative Research Program (ACRP), the Innovative Pavement Research Foundation (IPRF), and the Airfield Asphalt Pavement Technology Program (AAPTP).

150/5100-13B AAS-100 Development of State Standards for Nonprimary Airports

Provides guidelines for the development of State standards for and the use of State highway specifications for pavement construction at nonprimary public-use airports as provided for in title 49 United States Code (USC), Sections 47105(c) and 47114(d)(5), respectively.

150/5100-14E AAS-100 Architectural, Engineering, and Planning Consultant Services for Airport Grant Projects

This AC provides guidance for airport sponsors in the selection and engagement of architectural, engineering, and planning consultants. It also discusses services that normally would be included in an airport grant project, types of contracts for these services, contract format and provisions, and guidelines for determining the reasonableness of consultant fees. Please see the Principal Changes paragraph for a list of major changes from the last version of this AC.

CHANGE 1 (09-25-2015)
150/5210-6D AAS-100 Aircraft Fire Extinguishing Agents

Provides guidance on Aircraft Fire Extinguishing Agents and provides an acceptable methodology for complying with Title 14, Code of Federal Regulations, Part 139, Certification of Airports.

150/5210-25 AAS-100 Performance Specification for Airport Vehicle Runway Incursion Warning Systems (RIWS)

This AC contains minimum performance specifications for systems and equipment airports use to provide a warning to drivers on an airfield about a potential runway incursion. This AC discusses two types of detection systems: a preconfigured, commercial off the shelf (COTS) system; and a system with custom hardware and software.

150/5220-10E AAS-100 Guide Specification for Aircraft Rescue and Fire Fighting (ARFF) Vehicles

Provides an interactive specification that airports can use in procuring Aircraft Rescue and Fire Fighting (ARFF) vehicles. It describes the selection process, vehicle requirements, and how to produce formal specifications.

150/5220-17B AAS-100 Aircraft Rescue and Fire Fighting (ARFF) Training Facilities

Provides guidance on the design, construction, and operation of aircraft rescue and fire fighting (ARFF) training facilities.

150/5220-18A AAS-100 Buildings for Storage and Maintenance of Airport Snow and Ice Control Equipment and Materials Provides guidance for the site selection and design of buildings used to store and maintain airport snow and ice control equipment, store approved materials, and provide personnel areas required to support the requirements under the airport operator’s winter storm management plan. 09-14-2007
150/5220-20A AAS-100 Airport Snow and Ice Control Equipment

This advisory circular provides guidance to assist airport operators in the procurement of snow and ice control equipment for airport use.

150/5220-21C AAS-100 Aircraft Boarding Equipment

Contains the FAA's performance standards, specifications, and recommendations for the design, manufacture, testing and maintenance of equipment used in the boarding of airline passengers. The physical area covered in this AC is that which is bounded by the door of the passenger terminal area, on one end, to the door of the aircraft, on the other end. Although this AC refers only to aircraft boarding (enplaning), all references apply equally to disembarking (deplaning) with the described procedures occurring in reverse order.

The previous version of this AC discussed only the passenger lift scenario and associated equipment. This document updates that effort and addresses the other methods and equipment used to board an aircraft, including passenger boarding bridges, ramps, lifts, and aircraft boarding chairs.

150/5220-22B AAS-100 Engineered Materials Arresting Systems (EMAS) for Aircraft Overruns

Contains standards for the planning, design, installation, and maintenance of Engineered Materials Arresting Systems (EMAS) in runway safety areas (RSAs).

150/5220-23 AAS-100 Frangible Connections

Contains specifications for the frangible connections used to support objects located in airfield safety areas, including fuse bolts, special material bolts, frangible couplings, tear-through fasteners, and tear-out sections.

This AC is based on the performance standards, specifications, and recommendations contained in the International Civil Aviation Organization (ICAO) Aerodrome Design Manual, Part 6, Frangibility, and the U.S. Air Force (USAF) Engineering Technical Letter (ETL) 01-20: Guidelines for Airfield Frangibility Zones.

150/5220-25 AAS-100 Airport Avian Radar Systems

Provides guidance on the use of avian radar systems to supplement an airport’s Wildlife Hazard Management Plan (WHMP) and reduce the potential avian threats to aircraft.

See also:

150/5300-13A AAS-100 Airport Design

Contains the Federal Aviation Administration’s (FAA) standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.This substantial revision fully incorporates all previous changes to AC 150/5300-13 as well as new standards and technical requirements.

See also Interim Guidance on Land Uses Within a Runway Protection Zone.

CHANGE 1 (02-26-2014)

This change replaces Runway Reference Code (RRC) with new Approach and Departure Reference Code (APRC and DPRC) designations; expands Taxiway Fillet information and adds a new Appendix 8, Taxiway Fillet Design; adjusts TDG limits, with associated changes to fillet dimensions; moves Figure 4-1 to Chapter 1; combines Tables 3-4 and 3-5 to form Standards for Instrument Approach Procedures; incorporates minor editorial corrections; adds a Record of Changes at the end of the AC; and incorporates revisions describes in the Errata Sheet for the original release.

See also Additional Design Tools and Drawings for Change 1.

150/5300-15A AAS-100 Use Of Value Engineering For Engineering And Design Of Airport Grant Projects Provides guidance on using value engineering (VE) in airport projects funded under the Federal Aviation Administration's (FAA's) Airport Grant program. 09-30-2008
150/5300-16A AAS-100 General Guidance and Specifications for Aeronautical Surveys: Establishment of Geodetic Control and Submission to the National Geodetic Survey

Explains the specifications for establishing geodetic control on or near an airport. It also describes how to submit the information to the National Geodetic Survey (NGS) for approval and inclusion in the National Spatial Reference System (NSRS) in support of aeronautical information surveys. See also Airports GIS Video Training Series.

150/5300-18C AAS-100 Survey and Data Standards for Submission of Aeronautical Data Using Airports GIS

This AC provides the specifications and technical requirements for data collection conducted at airports in support of the FAA Airport Surveying – Geographic Information System (GIS) Program. The information furnished under these standards covers the entire spectrum of the FAA’s airport data requirements, including runway and stopway data, navigational aid data, obstruction data, and data on various airport features, including taxiways, aprons, and landmark features. 

This version of the AC is a major rewrite; it now conforms to the new FAA enterprise data model and process of maintaining a single authoritative source of aeronautical data. 

150/5300-19 AAS-100 Airport Data and Information Program

Note: The FAA is moving toward an electronic data submission system with the implementation of the FAA’s Navigation Procedures Project (NAV Lean) solution.  Sections of this AC may be used as those portions of the system become available.  In the interim, please refer to the current guidance provided in AC 150/5200-35A, Submitting the Airport Master Record in Order to Activate a New Airport for paper-based data submissions.

This AC provides general guidance and information for airport owners and operators in the collection and management of data describing the physical infrastructure, characteristics, and services of their airport. This data is source material for the FAA’s aeronautical information databases, for use in the dissemination of aviation information to the public, preparation of government and private industry aeronautical charts, and related flight information publications. This AC also describes the schedule, frequency, and standards for airport inspections.  

150/5320-5D AAS-100 Airport Drainage Design

This AC provides guidance for engineers, airport managers, and the public about the design and construction of airport surface storm drainage systems; and subsurface drainage systems for paved runways, taxiways, and aprons. It incorporates the DOD Unified Facilities Criteria (UFC) draft document, Surface Drainage Design, dated August 1, 2006. This revision adds guidance that was not included in the original DOD document. See paragraph 5,, "Purpose of this Revision."

150/5320-6E AAS-100 Airport Pavement Design and Evaluation

Provides guidance to the public on the design and evaluation of pavements at civil airports.

Because of the size of the document, it is available as one large file (see Complete) or as four smaller files (see Parts 1-4).

See also related Airport Design Software.

150/5320-12C AAS-100 Measurement, Construction, and Maintenance of Skid Resistant Airport Pavement Surfaces Contains guidelines and procedures for the design and construction of skid-resistant pavement; pavement evaluation, without or with friction equipment; and maintenance of high skid-resistant pavements.
CHANGE 1 (04-16-2004)
Updates names and addresses of FAA-approved CFME.
CHANGE 2 (09-02-2004)
Updates references to polymer-based runway surface chip seals to account for current materials technology.
CHANGE 3 (08-25-2004)
Updates names and addresses of FAA-approved CFME.
CHANGE 4 (02-03-2005)
Updates names and addresses of FAA-approved CFME.
CHANGE 5 (04-15-2005)
Updates names and addresses of FAA-approved CFME.
CHANGE 6 (05-25-2005)
Updates names and addresses of FAA-approved CFME.
CHANGE 7 (12-05-2005)
Updates names and addresses of FAA-approved CFME.
CHANGE 8 (02-07-2007)
Updates list of FAA-approved CFME.
150/5320-15A AAS-100 Management Of Airport Industrial Waste Provides basic information on the characteristics, management, and regulations of industrial wastes generated at airports. Provides guidance for the development of a Storm Water Pollution Prevention Plan (SWPPP) that applies best management practices to eliminate, prevent, or reduce pollutants in storm water runoff associated with particular airport industrial activities. 09-08-2008
150/5320-17A AAS-100 Airfield Pavement Surface Evaluation and Rating Manuals

This AC provides limited guidance on understanding and rating the surface condition of flexible (asphalt) and rigid (concrete) airfield pavements. Appendices A and B of this AC include the Asphalt and Concrete Airfield Pavement Surface Evaluation and Rating Manuals (PASER Manuals). The FAA recommends the information and procedures contained in the manuals for use by airport staff and consultants, directly or in combination with additional testing and data collection, only when it is not possible to complete a more detailed pavement condition index (PCI) survey as part of a more comprehensive pavement maintenance management program.

150/5325-4B AAS-100 Runway Length Requirements for Airport Design Provides design standards and guidelines for determining recommended runway lengths. 07-01-2005

1 - 25 of 75 results.

Export to MS Excel