Provides recommended guidelines for maintenance of airport visual aid facilities.

Provides guidance and recommendations on the installation of airport visual aids.

See also--

• Airport Technical Advisory on Electromagnetic Interference (EMI) (below)
• The Design, Installation, and Maintenance of In-Pavement Airport Lighting (PDF) by Arthur S.

Describes the standards for markings used on airport runways, taxiways, and aprons.

Describes standards for the design, installation, and maintenance of land and hold short lighting systems.

Describes standards for the system design, installation, inspection, testing, and maintenance of airport miscellaneous visual aids; i.e., airport beacons, beacon towers, wind cones, wind tees, and obstruction lights.

Provides guidance and recommendations on the installation of airport visual aids. Because of the size of the document, it is available as one large file (see Complete) or as five smaller files (see Parts 1-6).

Sets forth standards for a system of airport marking consisting of certain pilot aids and traffic control devices.

Contains the Federal Aviation Administration standards for the siting and installation of signs on airport runways and taxiways.

Provides guidance and recommendations on the installation of airport visual aids.

See also--

• The Design, Installation, and Maintenance of In-Pavement Airport Lighting (PDF) by Arthur S.

This AC contains the FAA standards for markings used on airport runways, taxiways, and aprons.

This AC contains the FAA standards for the siting and installation of signs on airport runways and taxiways.

Describes the standards for markings used on airport runways, taxiways, and aprons.

Incorporates new mandatory hold signs that reflect changed standards for the Precision Obstacle Free Zone (POFZ) and Category (CAT II/III ) operations.

Sets forth standards for a system of airport marking consisting of certain pilot aids and traffic control devices.

Provides guidance and recommendations on the installation of airport visual aids. This AC replaces several ACs, which are now cancelled: AC 150/5340-4C, Installation Details for Runway Centerline Touchdown Zone Lighting Systems; AC 150/5340-14B, Economy Approach Lighting Aids; AC 150/5340-17B, Standby Power for Non-FAA Airport Lighting Systems; AC 150/5340-21, Airport Miscellaneous Lighting Visual Aids; AC 150/5340-23B, Supplemental Wind Cones; AC 150/5340-24, Runway and Taxiway Edge Lighting System; AC 150/5340-27A, Air-to-Ground Radio Control of Airport Lighting Systems; AC 150/5340-28, Low Visibility Taxiway Lighting Systems; and AC 150/5340-29, Installation Details for Land and Hold Short Lighting Systems.

Describes the standards for design, installation, and maintenance of low visibility taxiway lighting systems, including taxiway centerline lights, stop bars, runway guard lights, and clearance bars.

Provides recommended guidelines for maintenance of airport visual aid facilities.

(Consolidated reprint includes change 1). Describes standards for the design, installation, and maintenance of runway and taxiway edge lighting.

Provides guidance and recommendations on the installation of airport visual aids. This AC replaces several ACs, which are now cancelled: AC 150/5340-4C, Installation Details for Runway Centerline Touchdown Zone Lighting Systems; AC 150/5340-14B, Economy Approach Lighting Aids; AC 150/5340-17B, Standby Power for Non-FAA Airport Lighting Systems; AC 150/5340-21, Airport Miscellaneous Lighting Visual Aids; AC 150/5340-23B, Supplemental Wind Cones; AC 150/5340-24, Runway and Taxiway Edge Lighting System; AC 150/5340-27A, Air-to-Ground Radio Control of Airport Lighting Systems; AC 150/5340-28, Low Visibility Taxiway Lighting Systems; and AC 150/5340-29, Installation Details for Land and Hold Short Lighting Systems.

Cancelled as of 9-1-98.

Provides recommended guidelines for maintenance of airport visual aid facilities, including Runway Status Lights (RWSL) Systems, rotating beacons, lighted wind cone assemblies, runway and taxiway guidance signs, Precision Approach Path Indicator (PAPI) Systems, Visual Approach Slope Indicators (VASIs), Runway End Identifier Lights (REILs), Medium Approach Lighting Systems (MALS, MALSF, MALSR), Hazard Beacons And Obstruction Lights, and Airport Lighting Control And Monitoring Systems (ALCMS).

Contains standards for the siting and installation of signs on airport runways and taxiways, including taxiway ending markers, location signs, runway distance remaining signs, mandatory hold signs associated with POFZ and CAT II/III operations, and many others.

Contains the FAA standards for markings used on airport runways, taxiways, and aprons. This AC cancels the Signs and Marking Supplement (SAMS).

Provides guidance and recommendations on the installation of airport visual aids. Because of the size of the document, it is available as one large file (see Complete) or as four smaller files (see Parts 1-4).

Provides guidance and recommendations on the installation of airport visual aids.

See also--

• The Design, Installation, and Maintenance of In-Pavement Airport Lighting (PDF) by Arthur S.

This AC provides guidance and recommendations about the installation of airport visual aids.

See also--

• The Design, Installation, and Maintenance of In-Pavement Airport Lighting (PDF) by Arthur S.