Contains the specifications for radio control equipment to be used for controlling airport lighting facilities.

Contains the FAA specification for obstruction lighting equipment. See also the following Engineering Briefs:

• EB 67: Light Sources Other than Incandescent and Xenon for Airport and Obstruction Lighting Fixtures
• EB 76: Using Solar Power for Airport Obstruction Lighting

Contains the specification for plug and receptacle (cable connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport lighting systems.

Specifies minimum requirements for an Airport Lighting Control and Monitoring System (ALCMS), which simplifies the control and monitoring of lighted visual aids and enhances airport safety.

Contains the specifications for discharge-type flashing light equipment to be used for runway end identifier lights (REIL) and for an omnidirectional approach lightning system (ODALS).

Contains the FAA standards for retroreflective markers for airport runways and taxiways. See also Errata Sheet below.

Contains the specifications for containers designed to serve as airport light bases, transformer housings, junction boxes, and accessories.

Describes the Airport Lighting Equipment Certification Program (ALECP). See also the Addendum and an explanation of FAA's interim Non-Original Equipment Manufacturer (OEM) Parts Certification Program.

Contains the Federal Aviation Administration (FAA) standards for Precision Approach Path Indicator (PAPI) systems, which provide pilots with visual glideslope guidance during approach for landing.

Contains specification for containers designed to serve as airport light bases, transformer housings, junction boxes and related accessories.

Contains a specification for lighted and unlighted signs to be used on taxiways and runways.

Contains the specifications for containers designed to serve as airport light bases, transformer housings, junction boxes, and accessories.

Contains the specification for radio control equipment to be used for controlling airport lighting facilities.

Contains the FAA standards for generic visual glideslope indicators systems. GVGI systems provide pilots with visual glideslope guidance during approaches for landing at general aviation airports.

(Consolidated reprint includes change 1). Contains the specifications for discharge-type flashing light equipment to be used for runway end identifier lights (REIL) and for an omnidirectional approach lightning system (ODALS).

Contains standards for portable runway and taxiway lights and runway end identifier lights for temporary use to permit continued aircraft operations while all or part of a runway lighting system is inoperative.

Contains the FAA specifications for low-impact resistant (LIR) structures used to support approach lighting systems (ALS) at airports.

Contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.

This AC contains the FAA specification for obstruction lighting equipment. Effective 12 months after the date of this circular, only that equipment qualified per this specification will be listed in AC 150/5345-53, Airport Lighting Equipment Certification Program.

Specifies the minimum requirements for an Airport Lighting Control and Monitoring System (ALCMS).

Contains a specification for constant current regulators (CCR) and a monitor for use with airport lighting circuits.

Contains the FAA standards for the Precision Approach Path Indicator (PAPI) systems, which provides pilots with visual glideslope guidance during approach for landing.

This advisory circular (AC) contains the specifications for airport light bases, transformer housings, junction boxes, accessories, and elevated light fixture covers and stakes.

Contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.

Contains a specification for constant current regulators used on airport lighting circuits and for a monitor that reports on the status of the regulator.

Replaces all references to AC 150/5345-1 with AC 150/5345-53.

Contains the specifications requirements for series-to-series isolation transformers for use in airport lighting systems.

Describes the specification requirements for L-824 electrical cables.

Provides the specified manufacturing requirements for panels used for remote control of airport lighting and auxiliary systems.

Contains a specification for wind cone assemblies to be used to provide wind information to pilots of aircraft.

Contains FAA specifications for light fixtures to be used on airport runways and taxiways.

Contains the FAA standards for power and control units for Land and Hold Short Lighting Systems.

Contains equipment specifications for light beacons which are used to locate and identify civil airports, military airports, seaplane bases, and heliports.

Provides guidance on the design of a lighted visual aid to indicate temporary runway closure.

Contains the specification requirements for a relay cabinet used to control airfield lighting circuits.

Provides the specified manufacturing requirements for panels used for remote control of airport lighting and auxiliary systems.

Contains the specifications requirements for series-to-series isolation transformers for use in airport lighting systems.

Contains the specification for radio control equipment to be used for controlling airport lighting facilities.

Contains the Federal Aviation Administration (FAA) standards for retroreflective markers for airport runways and taxiways.

This specification sets forth the FAA requirements for obstruction lighting equipment used to increase conspicuity of structures to permit early obstruction recognition by pilots.

Contains the specification for plug and receptacle (cable connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport lighting systems.

Contains FAA specifications for in-pavement and elevated light fixtures used on airport runways and taxiways, including Runway Status Lights (RWSL), Takeoff Hold Lights (THL), Runway Intersection Lights (RIL), and Runway Entrance Lights (REL).

This AC contains a specification for wind cone assemblies to be used to provide wind information to pilots.

This AC contains the specifications for airport light bases, transformer housings, junction boxes, and accessories.

This AC contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.

Contains FAA specifications for light fixtures to be used on airport runways and taxiways. See also--

• Engineering Brief 67: Light Sources Other than Incandescent and Xenon for Airport and Obstruction Lighting Fixtures

This advisory circular contains the specifications for airport light bases, transformer housings, junction boxes, accessories, elevated light fixture covers and stakes.