NAS Innovation and Emerging Concepts - Projects
Unmanned Aircraft System (UAS) Traffic Management Pilot Program (UPP)
Purpose
The Unmanned Aircraft System (UAS) Traffic Management (UTM) Pilot Program (UPP) was established in April 2017 per Federal Aviation Administration (FAA) Extension, Safety and Security Act of 2016, Sec. 2208 as an important component for identifying the initial set of industry and FAA capabilities required to support UTM operations. Analysis of test and demonstration results will provide an understanding of the level of investment required for each stakeholder's implementation. On January 14, 2019, U.S. Department of Transportation Secretary, Elaine L. Chao, announced the FAA's selection of three FAA UAS Test Sites (listed below) to partner with the agency in the UPP.
As the FAA, the National Aeronautics and Space Administration (NASA), and our new industry partners move forward, the primary goal for the UPP is to develop, demonstrate, and provide enterprise services, using a cloud service infrastructure, which will support the implementation of initial UTM operations. These enterprise services will support the sharing of information that promotes cooperative separation and situational awareness. UTM services to be demonstrated in the UPP include sharing of flight intent between operators, the ability for a UAS Service Supplier (USS) to generate a UTM Volume Reservation (UVR) — a capability providing authorized USSs the ability to issue notifications to UAS Operators regarding air or ground activities relevant to their safe operation — and share it with stakeholders (e.g., other USSs and FIMS).
The three partners are:
UPP Demonstration Shakedown
April – July 2019
UPP Demonstration
July 2019
Sponsor Name and Organization
Praveen Raju, FAA
Technical Partners
NASA
NIEC Project Lead
Daniel Fumosa
NIEC capabilities and/or suites used
software development, cloud infrastructure setup
UAS Contingency Procedures & Requirements (CPAR) HITL 2
Purpose
The main objective is to determine the level of automation needs for UAS contingency operation in the en route environment
Sponsor Name and Organization
Lacey Thompson, FAA
Principal Investigator
Sherri Magyarits, FAA and Sherry Chappell, FAA
Technical Partners
UAS inter-agency and industry partners, TGF, Communications Maintenance Section
NIEC Project Lead
Robin Peterson-Brown
NIEC capabilities and/or suites used
DESIREE, TGF, RCS Alcove (TRACON and Ghost controller), audio, video, and data recording
Shakedown
- September 17–21, 2018
- September 27, 2018
- October 2–4, 2018
Simulation
- October 16–18, 2018
- October 23–25, 2018
- October 30–November 1, 2018
- November 6–8, 2018
- December 4–6, 2018
Angle of Attack (AoA)
Purpose
Study and document the benefits, in terms of human performance, of using various forms of angle-of-attack display indicators to aid in upset recovery and diagnosis of air data system failures in transport category airplanes. This research requirement stems from the Commercial Aviation Safety Team Safety Enhancement 207 Output 1. For this project, scenarios and metrics for testing and evaluating the effectiveness of the angle-of-attack indicators will be developed using the NIEC Reconfigurable Cockpit Simulator (RCS). In order to evaluate the usage of an AoA indicator during the scenarios, an AoA indicator will be installed in the NIEC RCS. A type-rated pilot will evaluate candidate scenarios and the performance of the AoA indicator using the simulator. The output will be details for a written test plan for an experiment that will take place in Level D simulators with line pilots.
Sponsor Name and Organization
John Stuber, FAA
Principal Investigator
Angela Campbell, FAA
Technical Partners
L3
NIEC Project Lead
Robin Peterson-Brown
NIEC capabilities and/or suites used
RCS and data recording
Snapshot Capture
October 18–19, 2017
RE-Categorization of Separation Standards (RECAT) HITL TRACON HITL part 2
Purpose
The main objective is to conduct a Human-in-the-Loop simulation to evaluate the feasibility, safety, and complexities of the additions of the new RECAT categories as well as the level of controller workload and situational awareness compared to current operations under RECAT today. The NIEC provided Workload Assessment Keyboards (WAKs) for the Terminal Radar Approach Control (TRACON) HITL part 2 in the Standard Terminal Automation Replacement System (STARS) laboratory at the WJHTC.
Sponsor Name and Organization
Paul Stramde, FAA
Principal Investigator
Victor Quach, Human Solutions, Inc.
Co Investigators
Jeffrey Tittsworth and Jillian Cheng, FAA
Technical Partners
TGF, Communications Maintenance Section
NIEC Project Lead
Mary Delemarre
TRACON Shakedown
February 20–21, 2018
TRACON Simulation
February 27–March 1, 2018
UAS Contingency Procedures & Requirements (CPAR) HITL 1
Purpose
Examine procedural solutions to three types of UAS lost link events focusing on the terminal environment. This simulation will also address the impacts of using these standardized procedures on Air Traffic Controller (ATC) personnel.
Sponsor Name and Organization
Lacey Thompson, FAA
Principal Investigator
Sherri Magyarits, FAA and Sherry Chappell, FAA
Technical Partners
UAS inter-agency and industry partners, TGF, Communications Maintenance Section
NIEC Project Lead
Robin Peterson-Brown
NIEC capabilities and/or suites used
DESIREE, TGF, RCS Alcove (TRACON and Ghost controller), audio, video, and data recording
Shakedown
- April 9–13, 2018
- April 16–20, 2018
- May 10–11, 2018
Simulation
- May 14–17, 2018
- June 4–8, 2018
- June 12–14, 2018
- June 26–28, 2018
- July 10–12, 2018
Unmanned Aircraft System (UAS) Traffic Management Pilot Program (UPP)
Purpose
The NIEC team supported the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Pilot Program (UPP) project. UTM is a separate, but complementary system to the Air Traffic Management (ATM) system that utilizes industry's ability to supply services under the FAA's regulatory authority where these services do not exist. UTM is designed to support the real-time or near-real-time organization, coordination, and management of primarily low-altitude (<400 ft. above ground level [AGL]) multiple BVLOS UAS operations. With UTM, the FAA makes real-time constraints available to the UAS operators, who are responsible for managing their operation safely within these constraints without receiving positive Air Traffic Control (ATC) services from the FAA. Interactions under UTM are more indirect than with the ATM system and are based on the sharing of information on airspace constraints, flight intent, etc. between applicable participating entities. The primary means of communication and coordination between the FAA, operators, and other stakeholders is through a distributed network of highly automated systems via application programming interfaces (API), and not between pilots/operators and air traffic controllers via voice.
The primary goal of the UPP is to develop, demonstrate, and provide an enterprise service to support UAS Traffic Management operations. UPP will be an important component of the initial transfer of NASA's UTM research technologies to FAA and Industry. The NIEC integrated and modified NASA's UTM code to provide additional Flight Information Management Services to the UAS service suppliers. The NIEC setup the integration and testing environment to demonstrate the integration of the UTM with National Airspace Systems (NAS) using the Federal Cloud Service. The NIEC used the FAA's DevOps toolchain (bitbucket, jenkins, and artifcatory) along with ansible scripts to build and deploy UPP for the demonstration.
UPP Demonstration
TBD 2019
Sponsor Name and Organization
Biruk Abraham, FAA
Technical Partners
NASA
NIEC Project Lead
Daniel Fumosa
NIEC capabilities and/or suites used
software development, cloud infrastructure setup
Established on Departure Operations (EDO) HITL
Purpose
Conduct a Human-in-the-Loop (HITL) simulation to study the impact of EDO procedures on En Route and Terminal Radar Approach Control Facilities (TRACON) Air Traffic Controller (ATC) personnel. During EDO, Air Traffic Controller (ATC) personnel can maintain aircraft separation using the EDO standard. Once aircraft are flying their Standard Instrument Departure (SID) route using EDO, ATC personnel will achieve minimum separation when aircraft are on diverging courses as specified in the EDO standard.
Sponsor Name and Organization
Robert Novia, FAA
Principal Investigator
Ben Willems, FAA
Technical Partners
TGF, Communications Maintenance Section
NIEC Project Lead
Mary Delemarre
NIEC capabilities and/or suites used
DESIREE, TGF, ATM Area (ERAM-R and D sides, SmartEye), Multi-purpose Area (simulation control), audio, video, and data recording
Shakedown
- November 8–9, 2016
- November 22, 2016
- November 29–December 2, 2016
- January 19, 2017
Simulation
- December 13–15, 2016
- January 24–26, 2017
- January 31–February 2, 2017
UAS Low Altitude Operating Concepts HITL 1
Purpose
To conduct a Human-in-the-Loop (HITL) simulation to assess the impacts of Low-Altitude UAS missions on Air Traffic Management (ATM) operations. Missions using the ScanEagle UAS are projected to be below 2500 feet, using the Northern California TRACON (NCT) airspace. This is the first of three HITLs. Three scenarios will be conducted in succession.
Sponsor Name and Organization
Maureen Keegan, FAA
Principal Investigator
Lacey Thompson, FAA; and Carolina Zingale, FAA
Technical Partners
inter-agency and industry partners, TGF, Communications Maintenance Section
NIEC Project Lead
Robin Peterson-Brown
NIEC capabilities and/or suites used
DESIREE, TGF, RCS Alcove TRACON and Ghost controller), UAS Area (ScanEagle), audio, video, and data recording
Shakedown
- October 11–14, 2016
- October 26–27, 2016
- January 17–18, 2017
Simulation
- December 7–8, 2016
- January 24–27, 2017
UAS Low Altitude Operating Concepts HITL 2
Purpose
To conduct a Human-in-the-Loop (HITL) simulation to assess the impacts of Low-Altitude UAS missions on Air Traffic Management (ATM) operations. Missions may use the ScanEagle or Predator UAS, and are projected to be below 2500 feet, using the Northern California TRACON (NCT) airspace.
Sponsor Name and Organization
Maureen Keegan, FAA
Principal Investigator
Carolina Zingale, FAA
Technical Partners
inter-agency and industry partners, TGF, Communications Maintenance Section
NIEC Project Lead
Robin Peterson-Brown
NIEC capabilities and/or suites used
DESIREE, TGF, RCS Alcove (TRACON and Ghost controller), UAS Area (ScanEagle), audio, video, and data recording
Shakedown
- March 3, 2017
- March 16-17, 2017
- March 24, 2017
Simulation
March 28–30, 2017
UAS Low Altitude Operating Concepts HITL 3
Purpose
To conduct a Human-in-the-Loop (HITL) simulation to assess the impacts of Low-Altitude UAS missions on Air Traffic Management (ATM) operations. Missions will use UAS and global observers within Genera En Route Automation Modernization (ERAM) airspace.
Sponsor Name and Organization
Maureen Keegan, FAA
Principal Investigators
Carolina Zingale and Todd Truitt, FAA
Technical Partners
TGF, Communications Maintenance Section
NIEC Project Lead
Robin Peterson-Brown
NIEC capabilities and/or suites used
DESIREE, TGF, ATM (ERAM) RCS Alcove (NIEC dashboard and Ghost controller), audio, video, and data recording
Shakedown
- June 13-14, 2017
- June 22, 2017
- July 6,2017
Simulation Demonstration
July 11–13,2017
NextGen Advanced Trajectory Modeling (ATM)
Purpose
The purpose of this joint NIEC FTB project was to deliver aircraft intent and state data from different Flight Management Systems (FMS) to ground systems, and analyze the trajectory modelling improvements observed in those ground systems. The trajectory enhancements were captured and analyzed to quantify the level of improvements to the ground system modeling. NIEC personnel incorporated the data and integrated it into the FTB En Route Automation Modernization (ERAM) and the FTB Time-Based Flow Management (TBFM) systems. The demonstration using Denver, Colorado (ZDV) airspace.
Sponsor Name and Organization
Biruk Abraham, FAA
Principal Investigator
Gary Mueller, FAA
Technical Partners
Embry-Riddle, MITRE, FTB
NIEC Project Lead
Gary Mueller, FAA
NIEC capabilities and/or suites used
software development
RE-Categorization of Separation Standards (RECAT) HITL
Purpose
The main objective is to conduct a Human-in-the-Loop simulation to evaluate the feasibility, safety, and complexities of the additions of the new RECAT categories as well as the level of controller workload and situational awareness compared to current operations under RECAT today. The evaluation aims to discover the impacts of the new proposed separation changes using Memphis airspace in the Tower Suite within the NIEC. A secondary purpose of the HITL simulation is to evaluate the feasibility, safety, and complexities of controller decision support tools that could display RECAT separation distances (for example: an Airport Surface Detection Equipment Model X [ASDE-X] displaying RECAT separation distances, a capture box, and an Information Display System (IDS)). The NIEC provided Workload Assessment Keyboards (WAKs) for the Terminal Radar Approach Control (TRACON) HITL in the Standard Terminal Automation Replacement System (STARS) laboratory at the WJHTC.
Sponsor Name and Organization
Paul Stramde, FAA
Principal Investigator
Victor Quach, Human Solutions, Inc.
Co Investigators
Jeffrey Tittsworth and Jillian Cheng, FAA
Technical Partners
TGF, Communications Maintenance Section
NIEC Project Lead
Mary Delemarre
NIEC capabilities and/or suites used
DESIREE, TGF, Tower Area (ASDE-X, DBRITE, OTW visual system), Multi-purpose Area (simulation control), audio, video, and data recording
Tower Shakedown
- September 5–7, 2017
- September 26–28, 2017
Tower Simulation
- October 17–19, 2017
- October 24–26, 2017
- October 31–November 2, 2017
TRACON Shakedown
- August 8–10, 2017
- August 29–31, 2017
TRACON Simulation
September 12–14, 2017