Provides guidance to assist airport operators in preparing for Aircraft Rescue and Fire Fighting (ARFF) communications.

Announces the availability of the Airport Safety Self-Inspection DVD, which replaces the previously issued videotape.

Contains references to the minimum requirements for the selection and performance of aircraft rescue and firefighting personal protective equipment (PPE), self contained breathing apparatus (SCBA), and powered rescue tools.

Contains equipment specifications for light beacons that are used to locate and identify civil airports, military airports, seaplane bases, and heliports.

Provides guidance on the development, installation, testing, approval, and maintenance of ADS-B Out squitter units for airport ground vehicles.

Provides guidance on the use of avian radar systems to supplement an airport’s Wildlife Hazard Management Plan (WHMP) and reduce the potential avian threats to aircraft.

This AC provides standards for a system of airport marking consisting of certain pilot aids and traffic control devices.

This AC sets forth guidelines for operational safety on airports during construction.

This AC contains standards and guidance for airport operators on the issuance of Notice to Air Missions (NOTAM).

This AC contains the FAA standards for markings used on airport runways, taxiways, and aprons. Consolidated to include Change 1, dated December 23, 2020.

This AC contains the FAA standards for the siting and installation of signs on airport runways and taxiways.

This AC provides guidance to the public on the design and evaluation of pavements used by aircraft at civil airports.

This AC contains specifications and guidance for the storage, handling, and dispensing of aviation fuel on airports.

Contains standards for the planning, design, installation, and maintenance of Engineered Materials Arresting Systems (EMAS) in runway safety areas (RSAs).

Contains guidance on complying with new Federal statutory requirements regarding the construction or establishment of landfills near public airports.

Contains information, references and guidelines for construction of Aircraft Rescue and Fire Fighting (ARFF) station building design.

Provides the specifications for the collection of airport data for the FAA Airport Surveying – Geographic Information System (GIS) Program.

Provides guidance in the design of systems for interactive training of airport personnel, which are eligible for funding under the Airport Improvement Program (AIP) and with Passenger Facility Charge (PFC) revenues.

Provides guidance for developing and managing an airport foreign object debris (FOD) program. In addition, this AC provides specifications for the equipment used in FOD removal operations.

Provides guidance to the airport operator in the development and implementation of an Airport Emergency Plan (AEP).

Provides guidance, specifications, and standards for painting, marking, and lighting of ground vehicles operating in the airport air operations area (AOA).

Provides guidance on the design, construction, and operation of aircraft rescue and fire fighting (ARFF) training facilities.

Establishes minimum performance requirements for the design, construction, inspection, and maintenance of heated pavement systems for use in the Aircraft Operations Area (AOA).

Provides an interactive specification that airports can use in procuring Aircraft Rescue and Fire Fighting (ARFF) vehicles.

Provides guidance to assist airport operators in preparing for water rescue operations.

For certificated airports, this Advisory Circular (AC) defines the minimum acceptable standards for the conduct and preparation of Wildlife Hazard Site Visits (Site Visit), Wildlife Hazard Assessments (Assessments) and Wildlife Hazard Management Plans (Plans).

Provides guidance on the use of remote sensing technologies in the collection of data describing the physical infrastructure of an airport.

This AC provides information on courses and reference materials for training of Aircraft Rescue and Firefighting (ARFF) personnel.

This advisory circular provides guidance to assist airport operators in the procurement of snow and ice control equipment for airport use.

This AC provides guidance and specifications for the Maintenance of airport Visual Aid Facilities.

This AC and its appendices provide guidance to airport operators about developing training programs for safe ground vehicle operations, personnel taxiing or towing an aircraft, and pedestrian control on the movement and safety areas of an airport.

This AC provides guidance to assist airport operators in developing a snow and ice control plan, assessing and reporting airport conditions through the utilization of the Runway Condition Assessment Matrix (RCAM), and establishing snow removal and control procedures.

This AC contains the FAA standards for the Precision Approach Path Indicator (PAPI) systems, which provides pilots with visual glideslope guidance during approach for landing.

This AC contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.

This AC provides guidance and recommendations on the installation of airport visual aids. See the Principal Changes paragraph for a list of major changes to the document since the last version.

This AC describes the qualifications for wildlife biologists who conduct Wildlife Hazard Assessments (WHA) for airports, and it addresses the minimum wildlife hazard management curriculum for the initial and recurrent training of airport personnel who implement Wildlife Hazard Management Plans (WHMPs).

This AC explains the specifications for establishing geodetic control on or near an airport.

This AC provides guidance on submitting accurate, complete on-airport proposals so the FAA can conduct an aeronautical study.

This AC provides guidance on certain land uses that have the potential to attract hazardous wildlife on or near public-use airports.

This AC contains the FAA specification for obstruction lighting equipment.

This AC provides information to airport operators on airport self-inspection programs and identifies the items included in these programs.

Provides methods for meeting the certification requirements specified in Title 14, Code of Federal Regulations, Part 139, Certification of Airports.