« Back to Advisory Circulars main page

126 - 150 of 771 results.

Export to MS Excel

Search results
Number Office Title Date
20-53A ACE-111 Protection of Aircraft Fuel Systems Against Fuel Vapor Ignition Due to Lightning (Cancelled) Provides information and guidance concerning an acceptable means, but not the only means, of compliance with Parts 23 or 25 of the Federal Aviation Regulations (FAR) applicable to preventing ignition of fuel vapors due to lightning. Date Cancelled: 06-05-2006
Cancelled By: 20-53B
150/5300-9A AAS-100 Predesign, Prebid, and Preconstruction Conferences for Airport Grant Projects (Cancelled)

Provides guidance for conducting predesign, prebid, and preconstruction conferences for projects funded under the FAA airport grant program.

Date Cancelled: 09-30-2009
150/5070-6A APP-400 Airport Master Plans (Cancelled) Date Cancelled: 05-01-2007 06-01-1985
150/5345-27C AAS-200 Specification for Wind Cone Assemblies (Cancelled) Date Cancelled: 06-02-2004 07-19-1985
23-3 ACE-111 Structural Substantiation of Secondary Structures (Cancelled) Date Cancelled: 01-27-2003
Cancelled By: 23-19
150/5370-12 AAS-200 Quality Control of Construction for Airport Grant Projects (Cancelled) Provides information to ensure the quality of construction accomplished under the FAA Airports grant program. Date Cancelled: 09-29-2007 09-06-1985
61-83D AFS-840 Nationally Scheduled FAA-Approved Industry-Conducted Flight Instructor Refresher Clinics (FIRC) (Cancelled) Provides guidance for the preparation of training course outlines (TCO) for FAA-approved industry conducted FIRC’s under Amendment 61-25 to the FAR Date Cancelled: 11-19-2001
Cancelled By: 61-83E
23.629-1A ACE-100 Means of Compliance with Section 23.629, "Flutter" (Cancelled) Date Cancelled: 09-28-2004
Cancelled By: 23.629-1B
45-3 AIR-200 Installation, Removal, or Change of Identification Data and Identification Plates on Aircraft (Cancelled)

Provides information and guidance concerning the installation, removal, or change of identification data and identification plates on aircraft engines, and identifies an acceptable means, but not the only means, of compliance with FAR Part 45.

Date Cancelled: 08-03-2010
150/5190-1A AAS-310 Minimum Standards for Commercial Aeronautical Activities on Public Airports (Cancelled) Date Cancelled: 06-10-2002
Cancelled By: 150/5190-5
20-24B ANE-110 Qualification of Fuels (Cancelled)

Provides acceptable procedures for approving the qualification of fuels, lubricants, and additives for use in certificated aircraft engines.

Date Cancelled: 07-29-2011
150/5340-17B AAS-200 Standby Power for Non-FAA Airport Lighting Systems (Cancelled) 01-06-1986
90-87 AFS-840 Helicopter Dynamic Rollover (Cancelled)

Familiarize the helicopter pilot/instructor and pilot school personnel of the hazards associated with dynamic rollover.

Date Cancelled: 05-21-2015
150/5340-27A AAS-200 Air-To-Ground Radio Control of Airport Lighting Systems (Cancelled) 03-04-1986
25.571-1A ANM-110 Damage-Tolerance and Fatigue Evaluation of Structure (Cancelled)

This advisory circular (AC) sets forth an acceptable means of compliance with the provisions of·Part 25 of the Federal Aviation Regulations (FAR} dealing with the damage-tolerance alid fatigue evaluation requirements of aircraft structure.

Date Cancelled: 02-18-1997
25-7 ANM-110 Flight Test Guide for Certification of Transport Category Airplanes (Cancelled) Date Cancelled: 06-06-1995 04-09-1986
23-4 ACE-111 Static Strength Substantiation of Attachment Points for Occupant Restraint System Installations (Cancelled) 06-20-1986
150/5210-5B AAS-120 Painting, Marking, and lighting of Vehicles used on and Airports (Cancelled) Provides guidance, specifications, and standards, in the interest of airport personnel safety and operational efficiency, for painting, marking, and lighting of vehicles operating in the airport air operations areas. Date Cancelled: 08-31-2007 07-11-1986
23-5 ACE-111 Cutouts in a Modified Fuselage of Small Airplanes (Cancelled) 08-06-1986
150/5345-13A AAS-200 Specification for L-841 Auxiliary Relay Cabinet Asembly for Pilot Control of Airport Lighting Circuits (Cancelled) Contains the specification requirements for a relay cabinet used to control airfield lighting circuits. The L-841 consists of an enclosure containing a DC power supply, control circuit protection, and 20 pilot relays. Date Cancelled: 09-20-2007 08-08-1986
150/5345-49A AAS-200 Specification L-854, Radio Control Equipment (Cancelled) Contains the specification for radio control equipment to be used for controlling airport lighting facilities. Date Cancelled: 09-15-2005 08-08-1986
150/5100-6D Labor Requirements for the Airport Improvement Program (AIP) (Cancelled)

Encompasses the basic labor and associated requirements for the airport grant program. It is intended for sponsors using program assistance and for contractors and subcontractors working on projects under the program.

This AC is superseded by more current AIP labor requirements found in 49 Code of Federal Regulatios Part 18.36 (Procurement).

Date Cancelled: 03-05-2012
25.783-1 ANM-110 Fuselage Doors, Hatches, and Exits (Cancelled) Sets forth acceptable means of compliance with the provisions of Part 25 of the Federal Aviation Regulations (FAR) dealing with the certification requirements of fuselage doors. Guidance information is provided for showing compliance with structural and functional safety standards for doors and their operating systems. The intent of the requirements and some acceptable means of compliance are discussed. Other means are acceptable if they meet the intent of the regulations. For the propose of showing compliance with section 25.783 of FAR, hatches and exits are also considered to be doors. Date Cancelled: 04-25-2005
Cancelled By: 25.783-1A
23-6 ACE-111 Interpretation of Failure for Static Structural Test Programs (Cancelled) 02-17-1987
25-10 ANM-110 Guidance for Installation of Miscellaneous, Nonrequired Electrical Equipment (Cancelled)

This advisory circular (AC) sets forth a method of compliance with the requirements of Part 25 of the Federal Aviation Regulations (FAR) pertaining to installations of miscellaneous, nonrequired electrical equipment in transport category airplanes. It is for guidance purposes and provides an example of a method of compliance that has been found acceptable. Because the method of compliance presented in this AC is not mandatory, the terms "shall" and "must" used in this AC apply only to an applicant who chooses to follow this particular method without deviation. The applicant may elect to follow an alternate method provided the alternate method is also found acceptable by the FAA.

Date Cancelled: 07-22-2010

126 - 150 of 771 results.

Export to MS Excel