Provides standards for the design of heliports serving helicopters with single rotors. Basic concepts can also be applied to facilities serving helicopters with tandem (front and rear) or dual (side by side) rotors; although many standards will not apply to these facilities.

This advisory circular (AC) contains the specifications for airport light bases, transformer housings, junction boxes, accessories, and elevated light fixture covers and stakes.

This AC contains the FAA standards for the siting and installation of signs on airport runways and taxiways.

Provides guidance on Aircraft Fire Extinguishing Agents and provides an acceptable methodology for complying with Title 14, Code of Federal Regulations, Part 139, Certification of Airports.

Contains specifications for the frangible connections used to support objects located in airfield safety areas, including fuse bolts, special material bolts, frangible couplings, tear-through fasteners, and tear-out sections.

This AC provides guidance for using the standardized International Civil Aviation Organization (ICAO) method, called the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method, to report airport runway, taxiway, and apron pavement strength.

This AC provides general guidance on asphalt paving operations. The Hot-Mix Asphalt Paving Handbook 2000 (handbook) is in Appendix 1 of this AC.

Contains the Federal Aviation Administration’s (FAA) standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.This substantial revision fully incorporates all previous changes to AC 150/5300-13 as well as new standards and technical requirements.

Contains performance standards, specifications, and recommendations for DEVS equipment on Aircraft Rescue and Fire Fighting (ARFF) vehicles.

Provides guidelines on providing airport data to the FAA using FAA Forms 5010-3 and 5010-5.

This AC contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.

Contains the specification for plug and receptacle (cable connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport lighting systems.

This AC provides standards and recommendations for use in the design of aircraft deicing facilities.

This AC contains minimum performance specifications for systems and equipment airports use to provide a warning to drivers on an airfield about a potential runway incursion.

This AC contains a specification for wind cone assemblies to be used to provide wind information to pilots.

Contains the Federal Aviation Administration (FAA) standards for retroreflective markers for airport runways and taxiways.

Contains FAA specifications for light fixtures to be used on airport runways and taxiways. See also--

• Engineering Brief 67: Light Sources Other than Incandescent and Xenon for Airport and Obstruction Lighting Fixtures

This advisory circular provides guidance to the public on the design and evaluation of pavements used by aircraft at civil airports.