Skip to page content

Engineering Designee Training Information
(DER & ODA UM)

Course Topics

Electrical:

The Recurrent CBT for Electrical DERs and ODA UMs is available for registration through the Designee Registration System. This curriculum is comprised of 1 required course and 1 elective from a list. Students must complete the courses selected in order to receive credit for this curriculum. This curriculum will be available for credit through September 30, 2019. Review the 2019 Course Catalog for full descriptions of available courses. The following topics are offered:

Prerequisite Course

  • (27200138) 2019 Engineering Designee Recurrent General Overview (1 Hour)

Electives (Select 1)

  • (25811) NextGen Advanced Communications (4 Hours)
  • (25815) NextGen Advanced Navigation (Rev 4) (4 Hours)
  • (27200002) Understanding the US/EU Aviation Safety Agreement (4 Hours)
  • (27200019) Fundamentals of Risk Analysis (3 Hours)
  • (27200043) Electrical: Systems Aspects of Certification (2 Hours)
  • (27200050) Software Job Functions: Legacy System Software [Updated 1/2019]
  • (27200099) NextGen Surveillance (1 Hour)
  • (27200100) Head Up Displays (HUD) and Vision Systems (1 Hour)
  • (27200101) Auxiliary Displays & Electronic Flight Bag (EFB) Function (2 Hours)
  • (27200103) Software Job Functions: Model-Based Development (6 Hours) [Updated 1/2019]
  • (27200106) Electrical: Electronic Flight Bag Policy Overview (1.5 Hours)
  • (27200116) Electrical: System Safety Analysis (2 Hours) [Updated 4/2019]
  • (27200118) Electrical: ADS-B Installations (1 Hour)
  • (27200131) Part 23: A Performance-based Approach to Type Certification of Small Airplanes (2.5 Hours)

Flight Test:

The Recurrent CBT for Flight Test DERs and ODA UMs is available for registration through the Designee Registration System. This curriculum is comprised of 1 required course and 1 elective from a list. Students must complete the courses selected in order to receive credit for this curriculum. This curriculum will be available for credit through September 30, 2019. Review the 2019 Course Catalog for full descriptions of available courses. The following topics are offered:

Prerequisite Course

  • (27200138) 2019 Engineering Designee Recurrent General Overview (1 Hour)

Electives (Select 1)

  • (25811) NextGen Advanced Communications (4 Hours)
  • (27200002) Understanding the US/EU Aviation Safety Agreement (4 Hours)
  • (27200019) Fundamentals of Risk Analysis (3 Hours)
  • (27200069) Flight Test: Risk Management Update (30 minutes)
  • (27200070) Flight Test: Considerations for EMC Certification (30 minutes) [Updated 4/2019]
  • (27200099) NextGen Surveillance (1 Hour)
  • (27200100) Head Up Displays (HUD) and Vision Systems (1 Hour)
  • (27200101) Auxiliary Displays & Electronic Flight Bag (EFB) Function (2 Hours)
  • (27200108) Flight Test: Takeoff and Landing Performance Assessment (TALPA) Advisory Circulars (3 Hours) [Updated 3/2019]
  • (27200131) Part 23: A Performance-based Approach to Type Certification of Small Airplanes (2.5 Hours)

Mechanical Systems:

The Recurrent CBT for Mechanical Systems DERs and ODA UMs is available for registration through the Designee Registration System. This curriculum is comprised of 1 required course and 1 elective from a list. Students must complete the courses selected in order to receive credit for this curriculum. This curriculum will be available for credit through September 30, 2019. Review the 2019 Course Catalog for full descriptions of available courses. The following topics are offered:

Prerequisite Course

  • (27200138) 2019 Engineering Designee Recurrent General Overview (1 Hour)

Electives (Select 1)

  • (27200019) Fundamentals of Risk Analysis (3 Hours)
  • (27200048) Aircraft Seat Dynamic Impact Test Procedures-History and Background (8 Hours)
  • (27200050) Software Job Functions: Legacy System Software
  • (27200063) Mechanical: Flight Controls Emerging Concerns (1 Hour)
  • (27200068) Mechanical: Fire Resistant Hydraulic Fluids in Aviation (1 Hour)
  • (27200103) Software Job Functions: Model-Based Development (6 Hours)
  • (27200109) Mechanical/Powerplant: Icing Related Regulatory Changes (1 Hour)
  • (27200110) Mechanical: Post Maintenance Functional Tests (1.5 Hours) [Updated 3/2019]
  • (27200131) Part 23: A Performance-based Approach to Type Certification of Small Airplanes (2.5 Hours)
  • (27200139) Mechanical: Cargo Compartment Fire Protection (1 Hour) - NEW
  • (27200418) Mechanical: Certification of Brake Systems (1.5 Hours) - NEW

Propulsion:

The Recurrent CBT for Propulsion DERs and ODA UMs is available for registration through the Designee Registration System. This curriculum is comprised of 1 required course and 1 elective from a list. Students must complete the courses selected in order to receive credit for this curriculum. This curriculum will be available for credit through September 30, 2019. Review the 2019 Course Catalog for full descriptions of available courses. The following topics are offered:

Prerequisite Course

  • (27200138) 2019 Engineering Designee Recurrent General Overview (1 Hour)

Electives (Select 1)

  • (27200019) Fundamentals of Risk Analysis (3 Hours)
  • (27200050) Software Job Functions: Legacy System Software
  • (27200057) Powerplant: Understanding a Propeller Type Certificate Data Sheet (1 Hour)
  • (27200058) Powerplant: Diesel Engine Certification (1 Hour)
  • (27200060) Powerplant: CAAM Overview (1 Hour)
  • (27200062) Powerplant: Transport Airplane Propulsion Certification Issues (1 Hour)
  • (27200103) Software Job Functions: Model-Based Development (6 Hours)
  • (27200109) Mechanical/Powerplant: Icing Related Regulatory Changes (1 Hour)
  • (27200111) Powerplant: Fire Protection of Engine Cowling and Other Components (1 Hour) [Updated 4/2019]
  • (27200112) Powerplant: Valve Controls located in Flight Deck (1 Hour)
  • (27200113) Powerplant: Turbine Engine Endurance Test (1.5 Hours) [Updated 4/2019]
  • (27200114) Powerplant: Guidance for 14 CFR 33.4 Instructions for Continued Airworthiness (1 Hour)
  • (27200115) Powerplant: Guidance for 14 CFR 33.28 Engine Control Systems (1.25 Hours)
  • (27200131) Part 23: A Performance-based Approach to Type Certification of Small Airplanes (2.5 Hours)

Structures:

The Recurrent CBT for Structures DERs and ODA UMs is available for registration through the Designee Registration System. This curriculum is comprised of 1 required course and 1 elective from a list. Students must complete the courses selected in order to receive credit for this curriculum. This curriculum will be available for credit through September 30, 2019. Review the 2019 Course Catalog for full descriptions of available courses. The following topics are offered:

Prerequisite Course

  • (27200138) 2019 Engineering Designee Recurrent General Overview (1 Hour)

Electives (Select 1)

  • (27200019) Fundamentals of Risk Analysis (3 Hours)
  • (27200048) Aircraft Seat Dynamic Impact Test Procedures-History and Background (8 Hours)
  • (27200056) Introduction to Fatigue and Fatigue Management (2 Hours)
  • (27200095) Structures: Finite Element Modeling and Analysis Validation - Part I (1 Hour)
  • (27200096) Structures: Finite Element Modeling and Analysis Validation - Part II (1 Hour)
  • (27200098) Structures: Certification Compliance for Bird Strike Requirements (1 Hour) [Updated 4/2019]
  • (27200130) Structures: Composite Guidance - Present and In-Development (1.5 Hours)
  • (27200131) Part 23: A Performance-based Approach to Type Certification of Small Airplanes (2.5 Hours)

EDR & ODA Training

Engineering Designee Initial Training (Online)
The DER Initial Training package consists of three courses that all must be successfully completed to obtain a certificate of completion for the DER Initial training. The package includes:

  • 27200135: Aircraft Certification for Engineering Designees (4.5 Hours)
  • 27200025: Becoming A Designated Engineering Representative (2.5 Hours)
  • 27200026: Roles and Responsibilities for AIR Engineering Designees (1.5 Hours)

2019 DER Optional Supplemental Training (In-person)

  • Welcome/Introductions
  • Open Questions concerning Engineering Designee Training Program
  • International Update
    • AIR-40
    • Bilateral Agreements Overview
    • FAA and Brexit
    • DERs and International Policy
    • DER Do’s and Don’ts
  • Design Certification Part 21 Policy Update
    • Remote Technology
    • Design Approval Holder Major/Minor Change Responsibilities
    • Configuration Management Systems
    • Draft Directives, Policy and Guidance
  • Certification Process Guide (CPG) Overview
  • Open Forum
    • Potential Topics for Discussion:
      • DMS for DERs
      • Electronic 8110-3
      • Repair and Alteration Data
      • Repair Specifications
    • Additional Topics based on questions/input from attendees

27200027: Repairs and Alterations for AIR Engineering Designees (Online)
This course was recently updated and released February 2015. This course is intended for DERs and DER applicants seeking appointment of a special delegation for Major Repairs and/or Major Alterations, as well as for ODA Unit Members seeking authority for Major Repairs and/or Major Alterations within the ODA.

ODA Engineering Initial Training (Online)
The ODA Engineering Initial Training package consists of two courses that both must be successfully completed to obtain a certificate of completion for the ODA Engineering Initial training. The package includes:

  • AIR Indoctrination for FAA Engineering Designee Applicants
  • Roles and Responsibilities for AIR Engineering Designees

ODA Applicant Training, Part I (Online)
This course is intended for individuals who hold, or will hold the position of administrator for a company or organization that holds an Organization Designation Authorization (ODA), or who have applied to the FAA for an ODA

ODA, Part II: Major Repairs, Major Alterations and Airworthiness (MRA) (Online)
This training is intended for administrators of Organization Designation Authorization (ODA) holders with Major Repair, Alteration, and Airworthiness (MRA) functions. ODA Applicant Training Part I is a pre-requisite for this course.

ODA, Part II: Parts Manufacturer Approval (PMA) (Online)
This training is intended for administrators of Organization Designation Authorization (ODA) holders with Parts Manufacturer Approval (PMA) functions. ODA Applicant Training Part I is a pre-requisite for this course.

ODA, Part II: Production Certification (PC) (Online)
This training is intended for administrators of Organization Designation Authorization (ODA) holders with Production Certification (PC) functions.

ODA, Part II: Supplemental Type Certificate (STC) (Online)
This training is intended for administrators of Organization Designation Authorization (ODA) holders with Supplemental Type Certificate (STC) functions.

ODA, Part II: Technical Standard Order Authorization (TSOA) (Online)
This training is intended for administrators of Organization Designation Authorization (ODA) holders with Technical Standard Order Authorization (TSOA) functions.

ODA, Part II: Type Certification (TC) (Online)
This training is intended for administrators of Organization Designation Authorization (ODA) holders with Type Certification (TC) functions.

Acoustical Session:
The Acoustics Session will continue to be offered as an 'in person' seminar. It is offered in Los Angeles on even numbered years, i.e., 2020, 2022, in September.

Software Session:
The Software Session is offered through AIR-9A0. Information for this course can be on found on the Aircraft Certification Software website.


Links:


Visit our page often to stay current with program updates.

Page last modified:

This page was originally published at: https://www.faa.gov/other_visit/aviation_industry/designees_delegations/training/der_recurrent/online_topics/