Provides inspection notes which can be used for the maintenance support program for certain structural parts of the B-727 series aircraft.

Provides information and guidance concerning compliance with FAR Part 23 and CAR Part 3 applicable to flammability tests for various materials, components, and electrical wire.

Provides information and suggests procedures to increase crankshaft service life and to minimize failures.

Provides an acceptable means of compliance with Part 23 of the FAR for type certification of certain small airplanes.

This advisory circular (AC) establishes an acceptable means, but not the only means, of obtaining airworthiness approval of Global Positioning System (GPS) equipment for use as a supplemental navigation system for oceanic and remote, domestic en route, terminal, and non-precision instrument approach [except localizer, localizer directional aid (LDA) and simplified directional facility (SDF)] operations.

Provides guidance that public aircraft status does not exist outside the territorial limits of the United States.

Contains the specifications for radio control equipment to be used for controlling airport lighting facilities.

This advisory circular (AC) provides aircraft operators with information and guidance for assistance in compliance to Title 14 of the Code of Federal Regulations (14 CFR) part 91, section 91.21.

Provides updated information regarding the items that are required to be covered in oral passenger briefings and on passenger briefing cards.

Provides information and guidance concerning an acceptable means, but not the only means, for showing compliance with Title 14 Code of Federal Regulations (14 CFR) Part 23 for the certification of systems and equipment in normal, utility, acrobatic, and commuter category airplanes.

This advisory circular is issued to describe RVR measuring equipment and its operating use.

Provides the specifications for the collection of airport survey data through field and office methodologies in support of aeronautical information and airport engineering surveys.

Provides general information and guidance concerning issuance of airworthiness certificates for U.S. registered aircraft, and issuance of special flight authorizations for operation in the United States of foreign aircraft not having standard airworthiness certificates issued by the country of registry.

Provides maintenance inspection notes which can be used for the maintenance support program for certain structural parts of Fairchild Hiller F-27/FH-227 series aircraft.

Informs owners and operators about the usefulness of manufacturers’ maintenance manuals for servicing, repairing, and maintaining aircraft, engines and propellers.

Provides an acceptable means, but not the only means, of complying with the requirement that anti-skid and associated systems must be designed so that no probable malfunction will result in a hazardous loss of braking or directional control of an airplane.

Provides guidance to the public for the design and evaluation of pavements at civil airports.

Provides information and guidance concerning acceptable means, but not the only means, of complying with Title 14 of the Code of Federal Regulations (14 CFR) part 23 Subpart C and portions of Subpart D.

Provides guidance for the selection of a water source and standards for the design of a distribution system to support aircraft rescue and firefighting (ARFF) service operations on airports.

Establishes an acceptable means, but not the only means, of obtaining airworthiness approval of airborne Loran-C navigation systems for use under VFR (visual flight rules) and IFR (instrument flight rules) within the conterminous United States, Alaska, and surrounding U.S. waters.

Describes the public procedure the Federal Aviation Administration (FAA) will use to develop and issue Technical Standard Orders (TSOs) for aeronautical articles to be used on civil aircraft.

This advisory circular (AC) provides guidance and acceptable methods, but not the only methods, for demonstrating compliance with the applicable engine induction system icing and engine ice ingestion requirements.

Contains the FAA specification for obstruction lighting equipment. See also the following Engineering Briefs:

• EB 67: Light Sources Other than Incandescent and Xenon for Airport and Obstruction Lighting Fixtures
• EB 76: Using Solar Power for Airport Obstruction Lighting

Contains the specification for plug and receptacle (cable connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport lighting systems.

Provides information concerning Subpart F of FAR Part 21, and sets forth an acceptable means, not the sole means, of compliance with its requirements.

Provides information on approvals required for modifications to TSO’d seating systems. This revision incorporates guidance regarding TSO-C127 seating systems and additional information on marking and flammability testing requirements.

Describes acceptable methods for the operation of aircraft under Federal Aviation Regulations Part 91 with certain inoperative instrument and equipment, which are not essential for safe flight.

Establishes an acceptable means, but not the only means, of obtaining airworthiness approval of a multi-sensor navigation or flight management systems integrating data from multiple navigation sensors for use as a navigation system for oceanic and remote, domestic enroute, terminal, and non-precision instrument approach (except localizer, localizer directional aid (LDA) and simplified directional facility operations.

This advisory circular (AC) supports the introduction and the use of flight information Service Broadcast (FIS-B) weather and other aeronautical data link products for enhanced situational awareness.

Provides guidance material for the planning and design of airport terminal buildings at non-hub locations.

Provides instructions on the preparation and submittal of subject form.

This advisory circular (AC) applies to manufacturers and installers of products or appliances incorporating complex custom micro-coded components with hardware design assurance levels of A, B, and C.

Supplements AC 00-6A, Aviation Weather, in that it explains the weather service in general and the use and interpretation of reports, forecasts, weather maps, and prognostic charts in detail.

Provides an accepted methodology for estimating the value, or upper limit of the value, of Expected Casualty Ec for commercial space launch and reentry missions.

Provides guidance to commercial launch license applicants on the procedural aspects of the application process.

Describes the hazards of thunderstorms to aviation and offers guidance to help prevent accidents caused by thunderstorms.

Provides air carriers, freight forwarders, and shippers with sources of regulatory and training information and provides office locations and telephone numbers where technical assistance may be obtained dealing with the provisions of the appropriate regulations concerning the transportation by air of commodities which have been designated as regulated hazardous materials.

Provides guidance for the preparation and implementation of emergency plans at civil airports.

Provides guidance on Aircraft Fire Extinguishing Agents and provides an acceptable methodology for complying with Title 14, Code of Federal Regulations, Part 139, Certification of Airports.

Provides a compilation of historically acceptable means of compliance to specifically selected sections of Part 23 of the Federal Aviation Regulations that have become burdensome for small low performance airplanes to show compliance.

Provides information and guidance concerning an acceptable means, but not the only means, for showing compliance with Title 14 Code of Federal Regulations (14 CFR) Part 23 for the certification of systems and equipment in normal, utility, acrobatic, and commuter category airplanes.

This advisory circular (AC) sets forth an acceptable means, but not the only means, for demonstrating compliance to the following by computer modeling analysis techniques validated by dynamic tests: • Title 14 Code of Federal Regulations (14 CFR) parts 23, 25, 27, and 29, §§ 23.562, 25.562, 27.562, and 29.562.

This advisory circular (AC) establishes an acceptable means, but not the only means, to obtain Federal Aviation Administration’s (FAA) airworthiness approval for the installation of an Integrated Modular Avionics (IMA) System that uses hardware elements authorized under Technical Standard Order (TSO)-C153, Integrated Modular Avionics Hardware Elements.

Provides recommended guidelines for maintenance of airport visual aid facilities.

Provides maintenance inspection notes which can be used for the maintenance support program for certain structural parts of the DC-8 series aircraft.

Provides maintenance inspection notes, which can be used for the maintenance support program for certain structural parts of the B-737 series aircraft.

Provides information and guidance for maintaining aircraft tires to ensure their continued airworthiness.

Updates statistical information and brings to the attention of aircraft owners, operators, manufacturers, and maintenance personnel the circumstances surrounding engine power-loss accidents with recommendations on how those accidents can be prevented.

Provides guidance on using the NOTAM system for airport condition reporting.

Suggests acceptable methods by which product manufacturers may indicate FAA approval of recommended actions prescribed in manufacturers’ service documents.

Provides guidelines for design approval of aircraft data communications systems and applications primarily used for air traffic services.

Provides information and guidance concerning compliance with the requirements of Federal Aviation Regulations (FAR) Part 21, Certification Procedures for Products and Parts.

Describes a system for the voluntary accreditation of civil aircraft parts distributors on the basis of voluntary industry oversight and provides information that may be used for developing accreditation programs.

Consolidates into a single document existing policy documents applicable to the powerplant installation in normal, utility, acrobatic, and commuter category airplanes; and, certain ACs that cover specific paragraphs of the regulations.

Contains guidance and information on procedures for exporting aeronautical products and related special requirements submitted to the Federal Aviation Administration by other governments.

This advisory circular (AC) sets forth a method of compliance with the requirements of Part 25 of the Federal Aviation Regulations (FAR) pertaining to installations of miscellaneous, nonrequired electrical equipment in transport category airplanes.

Describes the hazards of thunderstorms to aviation and offers guidance to help prevent accidents caused by thunderstorms.

Informs owners and operators about the usefulness of manufacturers’ maintenance manuals for servicing, repairing, and maintaining aircraft, engines and propellers.

Provides guidelines for the development and installation of automatic reporting systems for altimeter setting and other operational data intended for use in connection with IFR operations.

Provides guidance for the development and implementation of standard pilot procedures for conducting safe aircraft operations on the airport surface.

Lists all commonly used drugs by pharmacological effect on airmen with side effects and recommendations.

This Advisory Circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the ice protection requirements in Title 14 of the Code of Federal Regulations (14 CFR) part 23.

Provides guidance for conducting predesign, prebid, and preconstruction conferences for projects funded under the FAA airport grant program.

Provides guidance on preparing for water rescue operations.

Provides guidance on the various aspects that should be considered in the FAA approval process of fire extinguishing system components manufactured under a Production Certificate (PC), components to be FAA approved under the Part Manufacturer Approval (PMA) process, or design changes to components originally approved by either method.

Provides information and guidance concerning control of software and related digital input/output data (used by production approval holders (PAH) and their suppliers during manufacture, inspection and/or test) designed for use in the acceptance of airborne products.

Provides guidance for compliance with the provisions of 14 CFR Part 25 of the Federal Aviation Regulations (FAR) pertaining to the damage-tolerance and fatigue evaluation requirements for transport category aircraft structure.

Provides guidance for airport sponsors in the selection and employment of architectural, engineering, and planning consultants under Federal Aviation Administration airport grant programs.

This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the ice protection requirements in Title 14 of the Code of Federal Regulations (14 CFR) part 23.

Transmits a directory of air carriers certificated by the FAA under the provisions of Title 14 of the Code of Federal Regulations (14 CFR Part 135).

Provides information for persons interested in applying for a Rotorcraft External-Load Operator Certificate.

Provides guidance to assist operators in planning, designing, and constructing seaplane base facilities.

This advisory circular (AC) provides guidance and information for incorporation into operators’ existing receiving/inspection systems to help prevent the introduction of unairworthy parts into inventories.

Provides information to assist manufacturers of aeronautical products (aircraft, aircraft engines, propellers, appliances, and parts) in notifying the Federal Aviation Administration of certain failures, malfunctions, or defects, resulting from design or quality control problems, in the products which they manufacture.

This advisory circular (AC) provides guidance for the migration of satellite voice systems for direct pilot/controller communictions as a supplement to high frequency/very high frequency (HF/vhf) voice communication systems.

Provides information and describes criteria to be emphasized in evaluating and approving the quality control system of a multinational and/or multicorporate consortium seeking a production certificate (PC).

This advisory circular (AC) provides guidance for showing compliance with certain requirements of Title 14, Code of Federal Regulations (CFR), part 25, for the design, installation, integration, and approval of electronic flight deck displays, components, and systems installed in transport category airplanes.

Communicates key windshear information relevant to flight crews. Appendix 1 of this advisory circular is the Pilot Windshear Guide, which is only one section of the two-volume Windshear Training Aid.

Provides information and guidance concerning controls for managing information systems that generate and store records used in the manufacture of products and parts.

Replaces AC 120-56. Provides information and guidance that may be used by certificate holders, production approval holders, indirect air carriers, and foreign air carriers disclosing apparent violations to the FAA of regulations in 14 CFR parts 21, 107, 108, 109, 121, 125, 129 (security program violations only), 133, 135, 137, 141, 142, 145, & 147 under the self-disclosure program.

Provides a means of getting Federal Aviation Administration (FAA) approval of aircraft lightning protection.

Provides guidance for the submission of the PFC application. View more recent versions of the

Explains the different categories of U.S. airports designated to serve international air traffic and provides a listing of these airports.

Contains FAA standards and recommendations for the installations of aircraft arresting systems on civil airports not owned or operated by the U.S.

Provides guidance as to acceptable methods for compliance with changes to the Federal Aviation Regulations 121.97(b) and 121.117(b).

Provides guidance for air operations and foreign air carriers when reporting to the FAA instances of noncompliance through the Voluntary Disclosure Reporting Program.

Provides aircraft operators with information and guidance for assistance in the compliance to FAR Section 91.21.

Transmits a directory of air carriers certificated by the FAA under the provisions of Title 14 of the Code of Federal Regulations (14 CFR Part 135).

Provides information and guidance material which may be used by Air Ambulance and Emergency Medical Service/Helicopter (EMS/H) operators.

Provides information and guidance which can be used to develop an approved aircraft inspection program (AAIP) for operators subject to provisions of FAR Section 135.419.

Transmits a directory of all FAA Certificated Pilot Schools

Discusses the requirements for the qualification of thrust reversers and sets forth an acceptable means of compliance with the tests prescribed in Federal Aviation Regulations, Part 33, then run under nonstandard ambient air conditions.

Provides information on the potential dangers of carbon monoxide contamination from faulty engine exhaust systems or cabin heaters of the exhaust gas heat exchanger type.

Alerts the aviation community to the potential hazards of inadvertent mixing or contamination of turbine and piston fuels, and provides recommended fuel control and servicing procedures.

Provides technical information to persons conducting a visual inspection of aircraft. The procedures presented in this AC are an acceptable means, but not the only means, for conducting visual inspections and inspection programs.

Provides guidance and information relative to the airworthiness certification and operation of amateur-built aircraft.

Provides information on the use of anti-icing additives PFA-55MB and Mil-I-27686 as an acceptable means of compliance with the FARs that require assurance of continuous fuel flow under conditions where ice may occur in turbine aircraft fuel systems.

Updates statistical information related to landing accidents involving aircraft with retractable landing gear and suggests procedures to minimize those accidents.

Issued monthly, the Aviation Maintenance Alerts are prepared from information submitted by persons who operate and maintain civil aeronautical products.

Outlines acceptable methods, but not the only methods, for measuring cabin interior emergency illumination on transport airplanes, and provides information as to suitable measuring instruments.

Provides information on acceptable methods of testing altimeters, static systems, altitude encoders, and Air Traffic Control (ATC) transponder systems.

Describes an acceptable means, but not the only means,, for selecting and testing alternatives to chemical agents and/or processes currently required by some manufacturers’ maintenance instructions, including instructions for continuing airworthiness.

This advisory circular (AC) provides a recommended inspection schedule for all owners of Socata TBM-700 aircraft who operate their aircraft 100 hours a year or less.

Provides guidance and information concerning the identification and marking requirements of Federal Aviation Regulations (FAR) Part 45, and describes an acceptable means, but not the sole means, of compliance with the regulations.

Specifies minimum requirements for an Airport Lighting Control and Monitoring System (ALCMS), which simplifies the control and monitoring of lighted visual aids and enhances airport safety.

Provides information and guidance concerning the installation, removal, or change of identification data and identification plates on aircraft engines, and identifies an acceptable means, but not the only means, of compliance with FAR Part 45.

A guide to the procedures and standards to be followed for a thorough and comprehensive checkout in modern single- and twin-engine aircraft.

Provides information and guidance for implementation of FARs 108.11 and 108.21 concerning the carriage of weapons and passengers under the control of armed law enforcement escorts.

Provides guidance for pilots and flight instructors on the certification standards, written test procedures, and other requirements contained in FAR Part 61.

This advisory circular informs pilot schools, flight instructors, and student IJilots of the recommendation of the Federal Aviation Administration for the use of approach slope indicator systems for pilot training.

Provides information and guidance regarding compliance with the provisions of Part 25 of the Federal Aviation Regulations applicable to dynamic testing of seats intended for use in transport category airplanes.

Provides instructions for the screening of passengers carrying classified material in order to maintain the integrity of the screening process and prevent the compromise of classified material.

Provides instructions to ensure continued airworthiness of structural repairs on transport category airplanes.

Describes acceptable means for showing compliance with certain requirements of Title 14, CFR, of FAR 25.1329, Flight Guidance System.

Sets forth one acceptable means of compliance with provisions of FAR 25.1457 (b), (e), and (f) pertaining to area microphones, cockpit voice recorder location, and erasure features.

Transmits a consolidated directory of all FAA Certificated Repair Stations certificated under the authority of Title 14 of the Code of Federal Regulations (14 CFR) Part 145.

Transmits a consolidated directory of all FAA Certificated Repair Stations certificated under the authority of Title 14 of the Code of Federal Regulations (14 CFR) Part 145.

Provides information and guidance on continuous airworthiness maintenance programs for operators subject to the provisions of FAR Parts 121, 127, or 135.

Transmits a directory of Federal Aviation Administration certificated Aviation Maintenance technician schools certificated by FAA under CFR 14 part 147, and the directory is current as of August 17, 2006.

Sets forth guidelines to assist persons in obtaining a pilot school certificate and associated ratings under FAR Part 141.

Transmits a directory of Federal Aviation Administration certificated Aviation Maintenance technician schools certificated by FAA under CFR 14 part 147, and the directory is current as of August 17, 2006.

Transmits a directory of Federal Aviation Administration certificated Aviation Maintenance technician schools certificated by FAA under CFR 14 part 147, and the directory is current as of August 17, 2006.

Clarifies the mechanical reliability reporting requirements contained in Parts 121, 127, and 135 of the Federal Aviation Regulations (FAR) and the accident and incident reporting requirements of Part 830 (old Part 430) of the National Transportation Safety Board (NTSB), Safety Investigation Regulations.

Provides one means, but not the only means, for obtaining approval of a weight and balance control system.

Defines the criteria and procedures required for an International Civil Aviation Organization (ICAO) three-letter and/or telephony designator assignment.

This advisory circular emphasizes the potential hazards to life and property due to lavatory fluid and potable water systems’ ice accumulation and resultant separation from aircraft in flight.

Provides one means, but not the only means, for obtaining approval of a weight and balance control system.

Provides guidance and acceptable means, not the sole means, by which compliance may be shown with the design and construction requirements of Part 33 of the Federal Aviation Regulations.

Contains guidance relating to type certification of aircraft engines which will constitute acceptable means, although not the sole means, of compliance with the Federal Aviation Regulations.

Provides guidance and recommendations on the installation of airport visual aids.

See also--

• Airport Technical Advisory on Electromagnetic Interference (EMI) (below)
• The Design, Installation, and Maintenance of In-Pavement Airport Lighting (PDF) by Arthur S.

Provides information and guidance concerning acceptable means, but not the only means, of compliance with part 33 of the Federal Aviation Regulation (FAR) applicable to vibration tests.

Provides basic information pertaining to FAA exclusive rights and minimum standards policies, which, in part, describe the contractual grant obligations assumed by the operators of public use airports.

Contains the specifications for discharge-type flashing light equipment to be used for runway end identifier lights (REIL) and for an omnidirectional approach lightning system (ODALS).

Provides guidance for citizen involvement in airport planning. Although not mandatory for airport grant programs, it explains the need for early citizen participation.

Contains the FAA standards for retroreflective markers for airport runways and taxiways. See also Errata Sheet below.

Contains performance standards, specifications, and recommendations for DEVS.

Provides guidance to airport owners and inspectors on using FAA Forms 5010-3 and 5010-5.

Provides guidance on certain land uses that have the potential to attract hazardous wildlife on or near public-use airports.

This AC assists the owners of public airports in developing and applying minimum standards for commercial aeronautical activities on public airports.

Provides a generic type rating curriculum that may serve as a basis for schools to develop a training requirements of Federal Aviation Regulations Parts 61 and 141.

Provides guidance on locating certain land uses having the potential to attract hazardous wildlife to or in the vicinity of public-use airports.

Provides information and guidance material on the certification process of air carriers under FAR Part 121 and Part 135.

Provides guidance for the preparation of training course outlines (TCO) for FAA-approved industry conducted FIRC’s under Amendment 61-25 to the FAR

This advisory circular outlines scales of protection considered as the recommended level compared with the minimum level in Federal Aviation Regulation Part 139.49 and tells how: these levels were established from test and experience data; to apply a systems approach in determining the overall needs for various airports; and to use conversion factors for estimating the equivalency between various fire extinguishing agents.

Provides recommendations, but is not the only means, that may be used by glider pilots who desire to transition into sailplanes or gliders with self-launching capability.

Transmits a directory all certificated mechanics who held an inspection authorization. SN 050-007-01341-8

Transmits a directory all certificated mechanics who held an inspection authorization. SN 050-007-01341-8

Promotes uniformity of implementation of the noise certification requirements of Part 36 of the Federal Aviation Regulations (FAR) by presenting technically acceptable test, analysis, and documentation procedures for subsonic turbojet airplanes that may be used by applicants for demonstrating compliance with Part 36.

Provides guidance for reporting construction progress of projects under the Airport Improvement Program (AIP).

Provides guidance material to manufacturers and operators of transport category airplanes for use in developing a continuing structural integrity program to ensure safe operation of older airplanes throughout their operational lives.

Contains information and guidance to be used by operators and pilots planning oceanic flights.

Provides information and guidance about acceptable maintenance programs for U.S. registered aircraft subject to FAR Part 129.

Transmits a directory of all FAA Certificated Pilot Schools

Provides information and guidance concerning the installation, removal, or change of identification data and identification plates on aircraft, aircraft engines, propellers, and propeller blades and hubs.

Provides guidance and information relative to the airworthiness certification and operation of amateur-built aircraft.

Provides updated information and guidance to aircraft owners/operators and maintenance personnel concerning mechanical work performed on U.S. registered aircraft by Canadian maintenance personnel and on Canadian registered aircraft by U.S. maintenance personnel and on Canadian registered aircraft by U.S. maintenance personnel.

Provides guidance for using the standardized International Civil Aviation Organization (ICAO) method to report airport pavement strength.

Provides information and guidance for implementation of new FAR 108, Airplane Operator Security

Provides guidance material for acceptable means for demonstrating compliance with the provisions of part 25 of the FAR dealing with the design requirements for transport category airplanes to preclude the aeroelastic instabilities of flutter, divergence and control reversal.

Set forth an acceptable means, but not the only means, of obtaining airworthiness and operational approval of airborne OMEGA navigation systems used in updating self-contained navigation systems such as Doppler and Inertial Radar for operations outside the United States under FAR Part 121.

Contains guidance relating to type certification of aircraft engines which will constitute acceptable means, although not the sole means, of compliance with the Federal Aviation Regulations.

Provides guidance and information concerning the identification and marking requirements of Federal Aviation Regulations (FAR) Part 45, and describes an acceptable means, but not the sole means, of compliance with the regulations.

Announces availability of Guidelines for the Sound Insulation of Residences Exposed to Aircraft Operations.

Describes the qualifications for wildlife biologists who conduct Wildlife Hazard Assessments for airports certificated under Title 14, Code of Federal Regulations, Part 139.

Announces the availability of RTCA Inc., Document RTCA-221, Guidance and Recommended Requirements for Airport Surface Movement Sensors.

Contains the specifications for containers designed to serve as airport light bases, transformer housings, junction boxes, and accessories.

Provides FAA guidance for approval of an Advanced Qualification Program (AQP) under SFAR 58.

Provides FAA guidance for approval of an Advanced Qualification Program (AQP) under SFAR 58.

Provides guidance, specifications, and standards, in the interest of airport personnel safety and operational efficiency, for painting, marking, and lighting of vehicles operating in the airport air operations areas.

Expands the Pilot Proficiency Award Program to 20 phases and makes special provision for seaplane-rated pilots to obtain “seawings.

Provides the specifications for the collection of airport survey data through field and office methodologies in support of aeronautical information and airport engineering surveys.

Describes the standards for markings used on airport runways, taxiways, and aprons.

Provides information and suggested procedures to increase service life and to minimize blade failures of metal propellers.

Provides a recommended inspection program for existing and new owners of L-39 Albatross aircraft operating under an Experimental Exhibition Special Airworthiness Certificate.

Provides updated information of general use on aircraft tie down techniques and procedures.

Calls attention to the regulatory requirements relating to the subject and provides information to aid pilots to comply with these requirements.

Appendixes 1 and 2 contain the latest list of reference materials and subject matter knowledge codes for airman knowledge testing.

Provides suggestions to improve sport parachuting safety and disseminates information to assist all parties associated with sport parachuting in complying with FAR Part 105, Parachute Jumping.

This advisory circular (AC) describes an acceptable means for showing compliance with the requirements of § 25.869(a), “Fire protection: systems,” of Title 14, Code of Federal Regulations (CFR) part 25.

Describes acceptable means for showing compliance with certain requirements of Title 14, CFR, of FAR 25.1329, Flight Guidance System.

Describes various acceptable means for showing compliance with the requirements of section 25.1309(b), (c), and (d) of the Federal Aviation Regulations (FAR).

Provides guidance to assist persons in obtaining and maintaining Federal Aviation Administration certification of an AMTS.

Provides guidance for the development, qualification, and approval of aircraft tire repair and retread process specifications, and the use of special nondestructive inspection (NDI) techniques.

Presents guidelines for the design and implementation of line operational simulations (LOS).

Provides guidance to assist persons in obtaining and maintaining Federal Aviation Administration certification of an AMTS.

Provides guidance to irport operators, consultants, and design engineers on preparing procurement specifications for sensor systems that monitor and report runway surface conditions.

Describes the Airport Lighting Equipment Certification Program (ALECP). See also the Addendum and an explanation of FAA's interim Non-Original Equipment Manufacturer (OEM) Parts Certification Program.

Explains the nature of the revision of FAA Form 5200-7, Bird Strike Incident/Ingestion Report and how it can be obtained.

Contains the Federal Aviation Administration (FAA) standards for Precision Approach Path Indicator (PAPI) systems, which provide pilots with visual glideslope guidance during approach for landing.

Explains the stall and spin awareness training required under FAR Part 61 and offers guidance to flight instructors who provide that training.

Transmits a directory all certificated mechanics who held an inspection authorization. SN 050-007-01341-8

Provides guidance material for acceptable means of demonstrating compliance with the requirements of Part 33 of the Federal Aviation Regulations (FAR) relative to surge and stall characteristics and thrust response of turbine engines.

Provides guidance for engineers, airport managers, and the public in the design and maintenance of airport drainage systems.

Contains performance standards, specifications, and recommendations for the design, construction, and testing of a family of aircraft rescue and firefighting (ARFF) vehicles.

Provides guidance and describes methods, but not the only methods, for demonstrating compliance with 35.37.

Presents changes to the Charles Taylor “Master Mechanic” award. This FAA award recognizes aviation maintenance personnel who have at least 50 years of experience in the aviation maintenance industry.

Provides standards for the construction of airports. Items covered include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation.

Provides information to ensure the quality of construction accomplished under the FAA Airports grant program.

Explains the importance of reporting collisions between aircraft and wildlife, more commonly referred to as wildlife strikes.

Provides listings of estimated airplane noise levels in units of A-weighted sound levels in decibels (dBA), ranked in describing order for the conditions and assumptions described.

Describes standards for the design, installation, and maintenance of land and hold short lighting systems.

Describes standards for the system design, installation, inspection, testing, and maintenance of airport miscellaneous visual aids; i.e., airport beacons, beacon towers, wind cones, wind tees, and obstruction lights.

Announces the availability and describes some of the features of a dynamic simulation computer model for use by airport planners, designers, and operators in evaluating and comparing the effectiveness of alternative airport terminal and landslide configurations and facilities.

This publication is a guide to be used by groups or emergency readiness teams in the civil aviation industry for organizing and conducting practice exercises in aircraft decontamination.

Describes maintenance inspection notes, which can be used for the maintenance support of certain structural parts of Lockheed L-188 series aircraft.

Presents changes to the Charles Taylor “Master Mechanic” award. This FAA award recognizes aviation maintenance personnel who have at least 50 years of experience in the aviation maintenance industry.

Describes maintenance inspection notes which can be used for the maintenance support of certain structural parts of Convair 240, 340/440, 240T, and 340T series aircraft.

Transmits a directory all certificated mechanics who held an inspection authorization. SN 050-007-01341-8

Designed to familiarize student mechanics with airframe construction, repair, and the operating theory of airframe systems.

Provides guidance on the use of nondestructive testing equipment to evaluate the load-carrying capacity of airport pavements.

To provide information to prospective airframe and powerplant mechanics and other persons interested in the certification requirements, application procedures, and the mechanic written, oral, and practical tests.

Identifies standards and procedures for storage, handling, and dispensing of aviation fuel on airports.

Provides standards for the construction of airports. Items covered include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation.

Provides guidelines and procedures for maintenance of rigid and flexible airport pavements.

Attempts to Acquaint public airport owners and other interested parties with the Federal Surplus Personal Property Program for public airports and to outline procedures to be used in applying for and acquiring surplus personal property for this purpose.

(Consolidated reprint includes change 1). Provides guidance to the public on the use of nondestructive testing devices as aids in the evaluation of the load-carrying capacity of airport pavements.

Contains good operating practices and procedures for use when approaching or departing airports without an operating control tower and airports that have control towers operating part time.

Discusses the Airport Pavement Management System (APMS) concept, its essential components, and how it can be used to make cost-effective decisions about pavement maintenance and rehabilitation.

Explains “wheel barrowing”, the circumstances under which it is likely to occur, and recommended corrective action.

Provides guidelines for implementation of two-dimensional area navigation (2D RNAV) within the U.S.

Contains a revised FAA policy under which the FAA accepts conditional ownership of equipment and systems from civil aviation interests, without the use of Federal funds, and operates, maintains, and provides the logistic support of such equipment.

Alerts pilots to the hazards of aircraft wake turbulence and recommends related operational procedures.

Provides recommendations for heliport design that apply to the construction, activation, and deactivation of heliports.

Provides suggestions and safety-related recommendations to assist amateur and ultra-light builders in developing individualized aircraft flight test plans.

Transmits a schedule of charges for services of FAA Flight Standards aviation safety inspectors outside the U.S.

Provides information and guidance for use in determining the quality, eligibility and traceability of aeronautical parts and materials intended for installation on U.S. type-certificated products and to enable compliance with the applicable regulations.

Outlines and upgrades the requirements for participation in the Federal Aviation Administration’s Aviation Maintenance Technician Awards Program.

Discusses problems of debris at airports, gives information on foreign objects, and tells how to eliminate such objects from operational areas.

Encompasses the basic civil rights requirements for the Airport Improvement Program (AIP). The AC is intended for sponsors using program assistance and for contractors and subcontractors working on projects under the program.

Consolidated directory of FAA Certificated technical Personnel Examiners designated under the authority of Title 14 of the Code of Federal Regulations (14CFR) Part 183, and is current as of August 29, 2001

Contains specification for containers designed to serve as airport light bases, transformer housings, junction boxes and related accessories.

Provides guidance on operational safety on airports---with special emphasis on safety during periods of construction activity---to assist airport operators in complying with Part 139, Certification of Airports.

Transmits a consolidated directory of FAA Certificated Technical Personnel Examiners, under the authority of Federal Aviation Regulation Part 183.

Presents recommended operational practices and procedures for the use of electronic long-range navigation equipment in oceanic or remote land areas.

Contains information concerning designee application, authorized functions, and initial and subsequent certificates of authority for DMIR/DAR/ODAR /DAS/DOA and SFAR No. 36.

Provides the aviation public and industry with guidelines for setting up reliable altimeter setting sources.

Provides prospective aviation event sponsors and other interested parties with information necessary to assist in planning and conducting a safe aviation event.

Contains a specification for lighted and unlighted signs to be used on taxiways and runways.

Issued to re-emphasize to general aviation instrument-rated pilots the need to determine the proper operation of gyroscopic instruments, the importance of instrument crosschecks and proficiency in partial-panel operations.

Contains the specifications for containers designed to serve as airport light bases, transformer housings, junction boxes, and accessories.

Contains the specification for radio control equipment to be used for controlling airport lighting facilities.

Contains the FAA standards for generic visual glideslope indicators systems. GVGI systems provide pilots with visual glideslope guidance during approaches for landing at general aviation airports.

Provides an acceptable means, but not the only means, to address Traffic Alert and Collision Avoidance System (TCAS) issues related to installation of TCAS II regarding compliance with 14 CFR Parts 121, 125, and 129 requirements for air carriers.

Recommends subject to be covered in air carrier programs designed to: (1) inform crewmembers about radiation exposure and known associated health risks; and (2) assist crewmembers in making informed decisions with regard to their work on commercial air carriers.

Provides one means, but not the only means, for obtaining approval of a Ground Deicing and Anti-icing Program, and for ensuring compliance with FAR Section 121.629.

This advisory circular (AC) provides one means, but not the only means, of ensuring that the contemplated maintenance, alteration, or continue-in-service condition is in compliance with applicable regulations and existing policy.

Assists airport management in the development of local procurement specifications for an acceptable, cost-effective proximity suit for use in aircraft rescue and firefighting operations.

This joint Flight Standards and Aircraft Certification Service AC provides an acceptable method of compliance for the certification, airworthiness, and operational approval of both portable and installed electronic flight bag (EFB) aircraft computing devices.

The purpose AC provides general information and acceptable methods compliance for the certification, airworthiness, and operational approval of certain aircraft surveillance systems and selected associated aviation applications.

This AC provides guidance on the acceptance and use of electronic signatures to satisfy certain operational and maintenance requirements.

Provides basic information on the characteristics, management, and regulations of industrial wastes generated at airports.

Provides information and practices regarding the use of Child Restraint Systems (CRS) on aircraft.

Provides a suggested means of compliance with the FAR regarding the evaluation and qualification of helicopter simulators to be used in training and checking

The AC offers one way to achieve an acceptable level of performance for an aircraft recording system when a controller-pilot data communication capability is installed.

This advisory circular (AC) provides information for production approval holders (PAH) under Title 14, Code of Federal Regulations (14 CFR) part 21, Certification Procedures for Products, Articles, and Parts.

Provides guidance to assist airport operators in preparing for Aircraft Rescue and Fire Fighting (ARFF) communications.

This advisory circular (AC) provides information to organizations providing training in aircraft that contain a training requirement in the limitations section of the Airplane Flight Manual (Aircraft Flight Manual (AFM), Rotorcraft Flight Manual (RFM), etc.).

Provides guidance on using the NOTAM system for airport condition reporting and describes significant changes to the format of Distant (D) and Local (L) NOTAMs.

a. This advisory circular (AC) provides guidance on developing and implementing a Fatigue Management Program (FMP).

Contains references to the minimum requirements for the selection and performance of aircraft rescue and firefighting personal protective equipment (PPE), self contained breathing apparatus (SCBA), and powered rescue tools.

Contains specifications for the frangible connections used to support objects located in airfield safety areas, including fuse bolts, special material bolts, frangible couplings, tear-through fasteners, and tear-out sections.

This advisory circular (AC) sets forth an acceptable means of showing compliance with Title 14 of the Code of Federal Regulations (14 CFR) § 23.1309(a) and (b) (Amendment 23-49) for equipment, systems, and installations in 14 CFR part 23 airplanes.

Superseded and replaced by OMB Circular A-133, Audits of States, Local Governments, and Non-Profit Organizations, revised June 24, 1997, and by the OMB Circular A-133, Compliance Supplement for the Department of Transportation, dated on or after March 2000.

Provides guidance and recommendations on the installation of airport visual aids. Because of the size of the document, it is available as one large file (see Complete) or as five smaller files (see Parts 1-6).

Provides guidelines and programming procedures for the development of state standards for general aviation airports as provided for in the Airport and Airway Development Act Amendments of 1976.

This advisory circular contains in~ormation and guidance for the servicing and ground handling of aircraft.

Provides operational and airworthiness guidance material for aircraft operators conducting 14 CFR part 97 required navigation performance (RNP) instrument approach procedures with Special Aircraft and Aircrew Authorization Required (SAAAR)

This advisory circular provides operational and airworthiness guidance regarding operation on U.S. Area Navigation (RNAV) routes, Standard Instrument Departures (SIDs), and Standard Terminal Arrivals (STARs).

Encourages pilots making VFR flights near noise-sensitive areas to fly at altitudes higher than the minimum permitted by regulation and on flight paths, which will reduce aircraft noise in such area.

Describes the standards and provides guidance in the development of a Surface Movement Guidance and Control System (SMGCS) plan for U.S. airports where scheduled air carriers are authorized to conduct operations when the visibility is less than 1,200 feet runway visual range.

(Consolidated reprint includes change 1). Contains the specifications for discharge-type flashing light equipment to be used for runway end identifier lights (REIL) and for an omnidirectional approach lightning system (ODALS).

Contains standards for portable runway and taxiway lights and runway end identifier lights for temporary use to permit continued aircraft operations while all or part of a runway lighting system is inoperative.

Provides FAA guidance for approval of an Advanced Qualification Program (AQP) under SFAR 58.

Provides an acceptable means, but not the only means, to address Traffic Alert and Collision Avoidance System (TCAS) issues related to installation of TCAS II regarding compliance with 14 CFR Parts 121, 125, and 129 requirements for air carriers.

Provides information on how to implement a continuing analysis and surveillance system (CASS), which is required for certain types of air carriers and commercial operators under Title 14 of the Code of Federal Regulations (14 CFR), §§ 121.373 and 135.431.

Provides guidance to airport planners and operators in the use of tree and vegetation screens in and around airports.

Contains information, references, and guidelines for a family of aircraft rescue and fire fighting (ARFF) vehicles.

Contains standards, specifications, and recommendations for the design of an aircraft rescue and firefighting training facility utilizing either propane or a flammable liquid hydrocarbon (FLH) as the fuel.

This advisory circular (AC) provides information for establishing methods acceptable to the Administrator for compliance with the additional maintenance requirements of Title 14 of the Code of Federal Regulation (14 CFR) part 135 for certain air carriers and commercial operators.

This advisory circular (AC) summarizes Federal Aviation Administration Flight Standards Service (AFS) Safety and Enforcement Policy about the use of portable oxygen concentrators (POC) onboard aircraft

This advisory circular provides guidance to customers of the National Airspace System (NAS) in regard to the nationwide implementation of Automatic Dependent Surveillance-Broadcast (ADS-B), Essential Services-Traffic Information Service?

Contains the Federal Aviation Administration standards for the siting and installation of signs on airport runways and taxiways.

Describes the Federal Aviation Administration’s Aviation Safety Reporting program, which utilizes the National Aeronautics and Space Administration (NASA) as a third party to receive and analyze Aviation Safety Reports.

This advisory circular (AC) transmits a website that contains Federal Aviation Administration (FAA) Certificated Air Carriers as required under the provisions of Title 14 of the Code of Federal Regulations (14 CFR) part 135.

This advisory circular (AC) transmits a website that contains Federal Aviation Administration (FAA) Certificated Pilot Schools.

This advisory circular (AC) provides applicants guidance for obtaining an airworthiness approval for traffic alert collision avoidance systems (TCAS II).

a. This advisory circular (AC) provides information to builders of experimental aircraft concerning repairman certification.

This advisory circular (AC) identifies RTCA, Inc., document DO-307, Aircraft Design and Certification for Portable Electronic Device (PED) Tolerance, dated October 11, 2007, and RTCA/DO-307, Change 1, dated December 16, 2008, as an acceptable means for designing and demonstrating aircraft tolerance to potential electromagnetic interference from portable electronic devices (PEDs).

Sets forth acceptable means by which Category II operations may be approved in accordance with FAR Parts 23, 25, 61, 91, 97, and 135.

Recommends subject to be covered in air carrier programs designed to: (1) inform crewmembers about radiation exposure and known associated health risks; and (2) assist crewmembers in making informed decisions with regard to their work on commercial air carriers.

Presents guidelines for developing, implementing, reinforcing, and accessing Maintenance Resources Management Training Programs for improving communication effectiveness, and safety in maintenance operations.

States an acceptable means, but not the only means, for obtaining operational approval of the initial engagement or use of an Auto Flight Guidance System (AFGS) under Title 14 CFR part 121, section 121.579(d); part 125, section 125.329(e); and part 135, section 135.93(e) for the takeoff and initial climb phase of flight.

Provides an acceptable means, but not the only means, for operational approval to use digital communication systems, including data link and voice communications (e.g. via satellite), for air traffic service (ATS) and related capabilities for operators conducting operations under Title 14 of the Code of Federal Regulations (14 CFR), parts 121, 125, 129, and 135.

Provides guidance for air carrier employees, air carrier contractor employees, and air carrier subcontractor employees, concerning the joint Federal Aviation Administration (FAA)/Occupational Safety and Health Administration (OSHA) Whistleblower Protection Program.

Sets forth standards for a system of airport marking consisting of certain pilot aids and traffic control devices.

This advisory circular (AC) provides aircraft owners, operators, and pilots operating aircraft under Title 14 of the Code of Federal Regulations (14 CFR) part 91, with information for removal of paper aeronautical charts and other documentation from the cockpit through the use of either portable or installed cockpit displays (electronic flight bags (EFB).

This advisory circular (AC) provides information and guidance on acceptable methods, but not the only methods, for compliance with the requirements for 30-second OEI and 2-minute OEI rotorcraft turbine engine ratings in part 33 of Title 14 of the Code of Federal Regulations (14 CFR Part 33).

This advisory circular (AC) describes an acceptable means for showing compliance with the requirements of Title 14, Code of Federal Regulations (14 CFR), 25.1419(e), (f), (g), and (h), Ice protection.

This advisory circular (AC) provides recommendations to assist helicopter emergency medical services (HEMS) operators with the development, implementation and integration of an Operations Control Center (OCC) and enhanced operational control procedures.

This advisory circular provides guidance for demonstrating compliance with the certification requirements for prevention of ignition sources within the fuel tanks of transport category airplanes.

This advisory circular (AC) provides guidance to assist airport operators in developing a snow and ice control plan, conducting and reporting runway friction surveys, and establishing snow removal and control procedures.

Provides standards for the construction of airports. Items covered include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation.

Provides guidance for reporting construction progress of projects under the Airport Improvement Program (AIP).

This advisory circular (AC) transmits a website that contains Federal Aviation Administration (FAA) Certificated Repair Stations, which are certificated under the authority of Title 14 of the Code of Federal Regulations (14 CFR) part 145.

This advisory circular (AC) provides system and operational approval guidance for operators to conduct Title 14 of the Code of Federal Regulations (14 CFR) part 97, Required Navigation Performance (RNP) instrument approach procedures (IAP).This AC provides system and operational approval guidance for the conduct of RNP Instrument Departure Procedures(RNP 1 DPs), Standard Terminal Arrival Routes STAR)(RNP 1STARs), and RNP 2 routes within the U.S.

This advisory circular (AC) provides information to the aviation community, particularly to aircrews operating within the National Airspace System (NAS), regarding methods to manage and report instances of passenger interference with crewmembers.

This advisory circular (AC) provides information and guidance on developing procedures for part marking and part re-marking when performing maintenance, alteration, and fabrication, including the fabrication of owner- or operator-produced parts.

This advisory circular (AC) provides information material for all repair station certificate holders or applicants under Title 14 of the Code of Federal Regulations (14 CFR) part 145 to develop and evaluate a Repair Station Manual (RSM) and Quality Control Manual (QCM).

This advisory circular (AC) provides guidance for the flight test evaluation of transport category airplanes.

This advisory circular (AC) provides guidance and acceptable methods, but not the only methods, that may be used to demonstrate compliance with the bird ingestion requirements of Title 14 of the Code of Federal Regulations (14 CFR) § 33.76.

Provides guidance for the planning, design, installation, and maintenance of aviation grade artificial turf in areas adjacent to the operational areas of an airport.

Contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.

Specifies the minimum requirements for an Airport Lighting Control and Monitoring System (ALCMS).

This advisory circular (AC) provides a Framework for Safety Management System (SMS) development by aviation service providers.

Provides guidance for conducting predesign, prebid, and preconstruction conferences for projects funded under the FAA airport grant program.

Explains how to obtain the latest airport-related research and development (R&D) products funded by the Federal Aviation Administration’s (FAA’s) Airports Organization.

This advisory circular (AC) describes the scope and recommended content requirements for contractual agreements between an air carrier and a contract maintenance provider (CMP).

Contains a specification for constant current regulators (CCR) and a monitor for use with airport lighting circuits.

This advisory circular (AC) explains the technical standard order (TSO) process outlined in Title 14 of the Code of Federal Regulations (14 CFR), part 21, Subpart O, for manufacturers producing articles and appliances under a TSO authorization (TSOA) or letter of TSO design approval (LODA).

This advisory circular (AC) provides guidance material for third party Instrument Flight Procedure (IFP) developers, hereafter referred to as 'Service Providers,' who use software based tools to develop Performance Based Navigation (PBN) Title 14 of the Code of Federal Regulations (14 CFR) part 97 Standard Instrument Procedures, to have these software tools validated by the Federal Aviation Administration (FAA).

This advisory circular (AC) contains the Federal Aviation Administration’s (FAA) standard for the non-Federal AWOS.

Provides guidelines for the development of State standards for and the use of State highway specifications for pavement construction at nonprimary public-use airports as provided for in title 49 United States Code (USC), Sections 47105(c) and 47114(d)(5), respectively.

Provides guidance and recommendations on the installation of airport visual aids.

See also--

• The Design, Installation, and Maintenance of In-Pavement Airport Lighting (PDF) by Arthur S.

This AC will help you to:

(1) Obtain a Letter of Acceptance (LOA) from the Federal Aviation Administration (FAA) that acknowledges compliance with this AC regarding aeronautical data processing.

Contains the FAA standards for the Precision Approach Path Indicator (PAPI) systems, which provides pilots with visual glideslope guidance during approach for landing.

Provides standards for the design of heliports serving helicopters with single rotors. Basic concepts can also be applied to facilities serving helicopters with tandem (front and rear) or dual (side by side) rotors; although many standards will not apply to these facilities.

This advisory circular (AC) provides guidance material for the airworthiness approval of installed positioning and navigation equipment.

Provides guidance on whether particular government aircraft operations are public aircraft or civil aircraft operations under the new statutory definition of “public aircraft.

The purpose of this advisory circular (AC) is to describe enhanced guidelines for autorotations during rotorcraft/helicopter flight training.

This advisory circular (AC) transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (AFS) aviation safety inspectors (ASI) outside the United States.

Provides guidance on understanding, identifying, preventing, and mitigating alkali-silica reactivity (ASR) in fresh and hardened Portland cement concrete airfield pavements.

This revised advisory circular (AC) clarifies the administrative procedures to ensure that applications for the Charles Taylor “Master Mechanic” Award are properly submitted and processed.

Contains performance standards, specification, and recommendations for the design, construction, and testing of water/foam aircraft rescue and firefighting (ARFF) vehicles.

Provides FAA standards and recommendations for the training of airport firefighting and rescue personnel in the proper operation and tactical use of Aircraft Rescue and Fire Fighting (ARFF) vehicles and ARFF vehicles equipped with High Reach Extendable Turret (HRETs).

Transmits the address list for all regional Airports Divisions and Airports District/Field Offices.

This advisory circular (AC) provides guidance on airworthiness approval for designers, manufacturers, and installers of satellite voice equipment supportingair traffic service (ATS).

This Advisory Circular (AC) provides guidance for the submission and approval of special instrument flight procedures that are developed by non-government proponents and submitted to the Federal Aviation Administration (FAA) for review and approval.

This advisory circular (AC) provides information for the preparation and approval of training course outlines (TCO) for Federal Aviation Administration (FAA)-approved, industry-conducted flight instructor refresher courses (FIRC) in accordance with Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.197(a)(2)(iii).

This advisory circular (AC) provides guidelines that industry may use to develop and revise the minimum scheduled tasking/interval requirements for derivative or newly type-certificated (TC) aircraft and powerplants for Federal Aviation Administration (FAA) approval.

This advisory circular (AC) provides information concerning acceptable methods of testing altimeters, static systems, altitude encoders, and air traffic control (ATC) transponder systems (ATCTS).

Contains the Federal Aviation Administration’s (FAA) standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.This substantial revision fully incorporates all previous changes to AC 150/5300-13 as well as new standards and technical requirements.

This AC provides airworthiness requirements for aircraft with an installed data link system intended to support air traffic services.

This AC contains the FAA standards for markings used on airport runways, taxiways, and aprons.

a. This advisory circular (AC) will provide you with information and guidance on how to show compliance with Title 14, Code of Federal Regulations (14 CFR) 23.1308, 25.1317, 27.1317, and 29.1317, High-intensity Radiated Fields (HIRF) Protection.

a. This advisory circular (AC) provides guidance for the initial and follow-on airworthiness approval of aircraft weather radar systems meeting the latest revision of the Technical Standard Order (TSO)-C63, Airborne Weather Radar Equipment.

This guide specification was developed by the Federal Aviation Administration (FAA) to assist airport management in the development of local procurement specifications.

This advisory circular (AC) provides guidance material for acceptable means, but not the only means, of demonstrating compliance with the provisions of Title 14, Code of Federal Regulations part 25 associated with the design requirements for transport category airplanes to preclude the aeroelastic instabilities offlutter, divergence, and control reversal.

This advisory circular (AC) provides guidance for Instrument Flight Procedure(IFP) developers, hereinafter referred to as "IFP Service Providers," to become authorized by the Federal Aviation Administration (FAA) to develop Title 14 of the Code of Federal Regulations (14 CFR) Part 97 Required Navigation Performance IFPs with Authorization Required (RNP AR).

This advisory circular (AC) applies to all operators conducting data link operations and presents various methods for all air operators using data link systems to meet Federal Aviation Administration (FAA) and International Civil Aviation Organization (ICAO) Standards, to include as well-recommended practices.

This advisory circular (AC) provides operators with recommended procedures for managing cargo operations.

This advisory circular (AC) provides guidance to assist persons in obtaining and maintaining Federal Aviation Administration (FAA) certification of an Aviation Maintenance Technician School (AMTS).

This advisory circular (AC) provides information and standards for the preparation and approval of training course outlines (TCO) for Federal Aviation Administration (FAA)-approved, industry-conducted flight instructor refresher courses (FIRC) in accordance with Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.197(a)(2)(iii).

This advisory circular (AC) provides guidance for pilot applicants, pilots, flight instructors, ground instructors, and examiners on the certification standards, knowledge test procedures, and other requirements in Title 14 of the Code of Federal Regulations (14 CFR) part 61.

This advisory circular (AC) describes various types of Clear Air Turbulence (CAT), some of the weather patterns associated with CAT, and turbulence reporting systems and networks.

This advisory circular (AC) is issued for the purpose of alerting all pilots to thepotential hazards of midair collisions and near midair collisions (NMAC), and to emphasize those basic problem areas related to the human causal factors where improvements in pilot education, operating practices, procedures, and improved scanning techniques are needed to reduce midair conflicts.

This advisory circular (AC) transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (AFS) aviation safety inspectors (ASI) outside the United States.

This advisory circular sets forth one means that would be acceptable to the Administrator for the evaluation of airplane simulators to be used in training programs or for airmen checking under Title 14 Code of Federal Regulations (CFR).

This AC transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (FS) aviation safety inspectors (ASI) outside the United States.

This AC transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (FS) aviation safety inspectors (ASI) outside the United States.

Contains the FAA specifications for low-impact resistant (LIR) structures used to support approach lighting systems (ALS) at airports.

This advisory circular (AC) outlines the participation requirements for the Federal Aviation Administration (FAA) William (Bill) O’Brien Aviation Maintenance Technician (AMT) Awards Program.

This advisory circular (AC) provides guidance and describes acceptable methods, but not the only methods, that may be used to demonstrate compliance with provisions of the requirements of part 35 of Title 14 of the Code of Federal Regulations (14 CFR part 35).

The Federal Aviation Administration (FAA) is issuing this advisory circular (AC) to announce the establishment of new pilot licensing/certification conversion procedures for Canadian pilot license holders and United States pilot certificate holders.

This advisory circular (AC) provides guidelines that industry may use to develop and revise the minimum scheduled interval/tasking requirements for derivative or newly type-certificated aircraft and powerplants for Federal Aviation Administration (FAA) approval.

This advisory circular (AC) provides suggestions to improve sport parachuting safety and disseminates information to assist all parties associated with sport parachuting in compliance with Title 14 of the Code of Federal Regulations (14 CFR) part 105.

This advisory circular (AC) provides guidance for conducting Instrument Flight Procedure Validation (IFPV) of Satellite-Based Performance-Based Navigation (PBN) Instrument Flight Procedures (IFP) for both fixed-wing and helicopter aircraft.

Provides guidance for using the standardized International Civil Aviation Organization (ICAO) method, called the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method, to report airport runway, taxiway, and apron pavement strength.

This advisory circular (AC) provides information and guidance on an acceptable means, but not the only means, of how a repair station located in the United States may obtain, renew, or amend a European Aviation Safety Agency (EASA) approval to maintain foreign aircraft and parts.

This advisory circular (AC) transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (AFS) aviation safety inspectors (ASI) outside the United States.

a. This advisory circular (AC) describes acceptable statistical methods, but not the only methods, to help develop substantiating data for comparative test and analysis compliance findings.

This Advisory Circular (AC) provides guidance for the installation and airworthiness approval of Automatic Dependent Surveillance – Broadcast (ADS-B) Out systems in aircraft.

Contains specifications and guidance for the storage, handling, and dispensing of aviation fuel on airports.

a. This Advisory Circular (AC) provides information to the aviation community, particularly aircrews operating within the National Airspace System (NAS) on measures taken by the Federal Aviation Administration (FAA) to address incidents of unauthorized illumination of aircraft by lasers.

This advisory circular (AC) describes the hazards of thunderstorms to aviation and offers guidance to help prevent accidents caused by thunderstorms.

This AC describes an acceptable means, but not the only means, to comply with the requirements for identifying S-LSA and E-LSA with identification (ID) plates, displaying nationality and registration marks, and displaying placards.

This advisory circular (AC) provides guidance for airman applicants, training organizations, designated examiners, and aviation safety inspectors (ASI) in determining English language skills currently required for airman certification as required by the Administrator under Title 14 of the Code of Federal Regulations (14 CFR) parts 61, 63, and 65.

This advisory circular (AC) provides information and courseware guidelines toauthorized providers, to aid in the development of a training program which meets the requirements of Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.156.

This advisory circular (AC) provides information to assist in determining whether government or government-contracted aircraft operations conducted within the territory of the United States are public or civil aircraft operations under the statutory definition of "public aircraft," in Title 49 of the United States Code (49 U.S.C.)

This advisory circular (AC) provides ways for pilots and airplane operators to identify, understand, and mitigate risks associated with runway overruns during the landing phase of flight.

This AC provides guidance for using the standardized International Civil Aviation Organization (ICAO) method, called the Aircraft Classification Number – Pavement Classification Number (ACN-PCN) method, to report airport runway, taxiway, and apron pavement strength.

This AC provides general guidance on asphalt paving operations. The Hot-Mix Asphalt Paving Handbook 2000 (handbook) is in Appendix 1 of this AC.

This advisory circular (AC) sets forth an acceptable means of compliance with the provisions of·Part 25 of the Federal Aviation Regulations (FAR} dealing with the damage-tolerance alid fatigue evaluation requirements of aircraft structure.

This advisory circular (AC) sets forth an acceptable means of compliance with the provisions of·Part 25 of the Federal Aviation Regulations (FAR} dealing with the damage-tolerance alid fatigue evaluation requirements of aircraft structure.

The standards contained in this AC relate to materials and methods used for the construction of airports.

a.

This advisory circular (AC) transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (AFS) aviation safety inspectors (ASI) outside the United States.

This advisory circular (AC) updates information regarding the hazards and risks of in-flight fires on transport category aircraft.

This advisory circular (AC) calls attention to RTCA Document (RTCA/DO-329) Aircraft Secondary Barriers and Alternative Flight Deck Security Procedures, as guidance to achieve effective protection of the flight deck as required by Title 14 of the Code of Federal Regulations (14 CFR) part 121 § 121.584(1)(a).

This revision of the advisory circular (AC) introduces new rulemaking regarding aircarrier contract maintenance programs and air carrier manual content pertaining to contract maintenance requirements and contract maintenance provider (MP) responsibilities required by Title 14 of the Code of Federal Regulations (14 CFR) part 121, §§ 121.368 and 121.369(b)(10), and part 135, §§ 135.426 and 135.427(b)(10).

This advisory circular (AC), as any AC, is not mandatory and does not constitute a regulation; rather, it provides standards and guidance for electronic signatures, electronic recordkeeping, and electronic manual systems.

This AC contains the FAA specification for obstruction lighting equipment. Effective 12 months after the date of this circular, only that equipment qualified per this specification will be listed in AC 150/5345-53, Airport Lighting Equipment Certification Program.

This advisory circular (AC) provides suggestions and safety related recommendations primarily to assist amateur and ultralight builders in developing individualized aircraft flight-test plans.

The Federal Aviation Administration (FAA) has issued a new rule contained in Title 14 of the Code of Federal Regulations (14 CFR) part 91, §§ 91.225 and 91.227.

This advisory circular (AC) provides aircraft owners, operators, and the public with information and guidance for assistance in compliance with Title 14 of the Code of Federal Regulations (14 CFR) part 91, § 91.21.

This advisory circular (AC) transmits an updated schedule of charges forservices of Federal Aviation Administration (FAA) Flight Standards Service (AFS) aviation safety inspectors (ASI) outside the United States.

This advisory circular (AC) provides information for certificated pilots and flight instructors to use in complying with the flight review required by Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.56 and the recent flight experience requirements of § 61.57.

In this advisory circular (AC), the Federal Aviation Administration (FAA) provides applicants with guidance for obtaining airworthiness approval for equipment installation of a Synthetic Vision Guidance System (SVGS) in aircraft.

This advisory circular (AC) provides information and guidance that can be used to develop and obtain approval of an Approved Aircraft Inspection Program (AAIP).

This Advisory Circular describes the requirements and procedures for the assignment and authorization for use of aircraft call signs in the National Airspace System (NAS), specifically, International Civil Aviation Organization (ICAO) three-letter designators (3LD), U.S. special designators, and local designators, and their associated telephonies.

This advisory circular (AC) provides information for certificated pilots and flight instructors to use in complying with the flight review required by Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.56 and the recent flight experience requirements of § 61.57.

This advisory circular (AC) provides guidance for pilot and instructor applicants, pilots, flight instructors, ground instructors, and examiners on the certification standards, knowledge test procedures, and other requirements in Title 14 of the Code of Federal Regulations (14 CFR) part 61.

This advisory circular sets forth me means that would be acceptable to the Administrator ,for approval of aircraft simulators requiring approval under Section 121.4(!

This advisory circular (AC) contains the specifications for airport light bases, transformer housings, junction boxes, accessories, and elevated light fixture covers and stakes.

This advisory circular (AC) provides guidance for developing a software management program and showing compliance with applicable regulations related to continued airworthiness when managing aircraft software during maintenance activities.

This AC transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (FS) aviation safety inspectors (ASI) outside the United States.

This Advisory Circular (AC) provides information for those proponents planning to conductoutdoor laser operations that may affect aircraft operations in the National Airspace System (NAS).

This Advisory Circular (AC) describes a method to demonstrate compliance with the high consequence event protection requirements of title 14 of the Code of Federal Regulations (14 CFR) § 450.101(c) and the requirements to evaluate the potential for high consequence events in uncontrolled areas in accordance with §§ 450.108(b) and 450.108(c)(4).

This Advisory Circular (AC) describes to pilots, aircrew members,dispatchers, and other operations personnel the various types of clear air turbulence(CAT) and some of the weather patterns associated with it.

This advisory circular (AC) provides information about using an enhanced flight vision system (EFVS) in lieu of natural vision while conducting instrument approach operations.

The Pilot Records Improvement Act of 1996 (PRIA), as amended, was enacted to ensure that air carriers and air operators adequately investigate a pilot’s background before allowing that pilot to conduct commercial air carrier flights.

This AC provides guidance on using the NOTAM system for reporting airport facilities changes or outages and for utilizing the Runway Condition Assessment Matrix for airport condition reporting.

This advisory circular (AC) provides guidance for pilot applicants, pilots, flight instructors, ground instructors, and examiners on the certification standards, knowledge test procedures, and other requirements in Title 14 of the Code of Federal Regulations (14 CFR) part 61.

This AC provides aircraft operator guidance on the use of radio frequency identification (RFID) devices and systems in operational and maintenance environments as an alternative means of performing specific maintenance and inspection tasks in accordance with Title 14 of the Code of Federal Regulations (14 CFR) parts 43, 91, 121, 125, 129, and 135.

This AC provides guidance and recommendations for the preparation and approval of training course outlines (TCO) for Federal Aviation Administration (FAA)-approved, industry-conducted flight instructor refresher courses (FIRC) in accordance with Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.197(a)(2)(iii).

This advisory circular (AC) provides guidance for non-FAA Instrument Flight Procedure (IFP) developers, hereinafter referred to as “service providers,” to become authorized by the Federal Aviation Administration (FAA) (Flight Standards’ Flight Technologies and Procedures Division) to develop public, space-based IFPs.

Thia circular set forth one means that would be acceptable to the Adminiatrator for approval of aircraft aimulatora or other training devices requiring approval uader 121.407.

This AC contains the FAA standards for the siting and installation of signs on airport runways and taxiways.

This AC provides an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (FS) aviation safety inspectors (ASI) outside the United States.

This Advisory Circular (AC) describes a method to demonstrate compliance with the high consequence event protection requirements of title 14 of the Code of Federal Regulations (14 CFR) § 450.101(c) and the requirements to evaluate the potential for high consequence events in uncontrolled areas in accordance with §§ 450.1 08(b) and 450.108(c)(4).

The Federal Aviation Administration (FAA) (“we”) developed this AC to provide general information and guidance for certificated and General Aviation (GA) operators (“you”) planning flights in oceanic and remote continental airspace.

Contains the specification for plug and receptacle (cable connectors) used with underground power cables, isolation transformer leads, and light fixture leads for airport lighting systems.

This advisory cireular (AC) provides information relative to establishing methods acceptable to the Administrator for compliance with the additional maintenance requirements of the Federal Aviation Regulations (FAR) Part 135 as amended for certain air taxi operators and commercial operators (ATCO).

This advisory circular (AC) describes an acceptable means, but not the only means, of compliance with the Title 14 of the Code of Federal Regulations (14 CFR) regarding qualification and type rating of flight crewmembers operating under 14 CFRs.

This advisory circular (AC) transmits a website that contains Federal Aviation Administration (FAA) Certificated Aviation Maintenance Technician Schools, which are certificated under the provisions of Title 14 of the Code of Federal Regulations (14 CFR) part 147.

This advisory circular (AC) sets forth an acceptable means of compliance with the provisions of Part 25 of the Federal Aviation Regulations (FAR) dealing witti the certification requirements for high lift and drag devices.

This advisory circular (AC) contains updated and additional information for the pilots of airplanes under parts 91, 121, 125, and 135 of Title 14 of the Code of Federal Regulations (14 CFR).

a. This advisory circular (AC) provides information about Title 14, Code of Federal Regulations (14 CFR), part 45, Identification and Registration Marking.

Contains performance standards, specifications, and recommendations for DEVS equipment on Aircraft Rescue and Fire Fighting (ARFF) vehicles.

This advisory circular (AC) transmits a website that contains Federal Aviation Administration (FAA) certificated mechanics that hold an inspection authorization (IA).

a. The guidance in this advisory circular (AC) provides one acceptable means of compliance, but not the only means, for type design approval of aircraft that have a data link system installed.

Contains performance standards, specification, and recommendations for the design, construction, and testing of water/foam aircraft rescue and firefighting (ARFF) vehicles.

a. In this advisory circular (AC), the Federal Aviation Administration (FAA) provides guidance on airworthiness approval of enhanced vision system (EVS), synthetic vision system (SVS), combined vision system (CVS), and enhanced flight vision system (EFVS) equipment installation.

This advisory circular (AC) contains general information and guidance for operators planning oceanic flights, including authorizations needed for operations outside the continental United States.

suppliers by a Federal Aviation Administration (FAA) production approval holder (PAH).

Provides recommended guidelines for maintenance of airport visual aid facilities, including Runway Status Lights (RWSL) Systems, rotating beacons, lighted wind cone assemblies, runway and taxiway guidance signs, Precision Approach Path Indicator (PAPI) Systems, Visual Approach Slope Indicators (VASIs), Runway End Identifier Lights (REILs), Medium Approach Lighting Systems (MALS, MALSF, MALSR), Hazard Beacons And Obstruction Lights, and Airport Lighting Control And Monitoring Systems (ALCMS).

This Advisory Circular establishes guideline for U.S. operator to use when reviewing Foreign Terminal instrument Procedures ( FTIPs)

This advisory circular (AC) presents various methods for operators of different data link systems to meet international standards set by the International Civil Aviation Organization (ICAO) and the regional airspace authorities.

This advisory circular (AC) transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (AFS) aviation safety inspectors (ASI) outside the United States.

This advisory circular (AC) provides guidance material for the airworthiness approval of installed positioning and navigation equipment.

This advisory circular (AC) provides guidance for the initial and follow-on installations of Automatic Dependent Surveillance - Broadcast (ADS-B) In systems supporting ground and airborne traffic display applications.

This advisory circular provides guidance for all operators using the continuous descent final approach (CDFA)technique while conducting a nonprecision Approach (NPA) procedure.

This advisory circular (AC) provides guidance material for third party Instrument Flight Procedure (IFP) developers, hereafter referred to as 'IFP Service Providers,' to become authorized by the Federal Aviation Administration (FAA) to develop Title 14 of the Code of Federal Regulations (14 CFR) Part 97 Required Navigation Performance (RNP) IFPs with Authorization Required (AR).

This advisory circular provides guidance material for acceptable means, but not the only means, of demonstrating compliance with the requirements of Part 25 of the Federal Aviation Regulations which includes probabilistic terms, as introduced by Amendment 25-23, for airplane equipment, systems, and installations.

This advisory circular (AC) provides an acceptable, but not the only, means to address Traffic Alert and Collision Avoidance System (TCAS) issues related to installation and use of TCAS II regarding compliance with Title 14 of the Code of Federal Regulations (14 CFR) parts 121, 125, and 129 requirements for air carriers.

Contains the Federal Aviation Administration (FAA) standards for retroreflective markers for airport runways and taxiways.

This advisory circular (AC) provides information and guidance to owners and pilots of experimental airplanes and to flight instructors who teach in these airplanes.

This document is intended as a guideline for organizations to develop a formal training program for qualification of composite technicians.

This advisory circular (AC) provides guidance for the initial and follow-on installations of Automatic Dependent Surveillance – Broadcast (ADS-B) In systems supporting ground and airborne traffic applications.

This advisory circular (AC) provides guidance for the flight test evaluation of transport category airplanes.

Provides standards for the construction of airports. Items covered in this AC include general provisions, earthwork, flexible base courses, rigid base courses, flexible surface courses, rigid pavement, fencing, drainage, turfing, and lighting installation.

This advisory circular (AC) presents various best practices for design approval holders (DAHs) of aircraft, aircraft engines, propellers, and appliances when drafting service bulletins (SBs) related to an airworthiness directive (AD).

This advisory circular (AC) explains what the term "maintenance program" means.

The Pilot Records Improvement Act of 1996 (PRIA), as amended, was enacted to ensure that air carriers and air operators adequately investigate a pilot’s background before allowing that pilot to conduct commercial air carrier flights.

This specification sets forth the FAA requirements for obstruction lighting equipment used to increase conspicuity of structures to permit early obstruction recognition by pilots.

Describes the qualifications for wildlife biologists who conduct Wildlife Hazard Assessments (WHA) for airports certificated under 14 CFR Part 139 and at non-certificated airports funded by the Airport Improvement Program (AIP) or Passenger Facility Charge (PFC) Program.

This advisory circular (AC) describes the Federal Aviation Administration (FAA) Aviation Safety Reporting Program (ASRP) which utilizes the National Aeronautics and Space Administration (NASA) as a third party to receive and process Aviation Safety Reports.

This advisory circular (AC) provides guidance for establishing the certification basis for changed aeronautical products and identifying the conditions under which it will be necessary to apply for a new type certificate.

Contains standards for the siting and installation of signs on airport runways and taxiways, including taxiway ending markers, location signs, runway distance remaining signs, mandatory hold signs associated with POFZ and CAT II/III operations, and many others.

This advisory circular (AC) provides information and practices regarding the use of child restraint systems (CRS) on aircraft.

Provides guidelines on providing airport data to the FAA using FAA Forms 5010-3 and 5010-5.

The objective of the WINGS Pilot Proficiency Program is to reduce the number of accidents in General Aviation (GA) by assisting airmen to find educational opportunities designed to help them apply the principles of risk assessment and risk management (RM).

This advisory circular (AC) provides guidance applicable to adding fuels and oils as engine, aircraft, or auxiliary power unit (APU) operating limitations.

This advisory circular (AC) transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (AFS) aviation safety inspectors (ASI) outside the United States.

This advisory circular (AC) provides information for certificated pilots and flight instructors to use in complying with the flight review required by Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.56 and the recent flight experience requirements of § 61.57.

The information contained in this advisory circular (AC) was developed based on a review of recommended practices developed by major airplane manufacturers, labor organizations, air carriers, training organizations, simulator manufacturers, and industry representative organizations.

This advisory circular (AC) provides guidance for the flight test evaluation of transport category airplanes.

Advisory Circular 120-26K defines the criteria and procedures for obtaining an International Civil Aviation Organization (ICAO) three-letter identifier and/or telephony designator assignment and for obtaining an FAA Special or Local telephony/call sign.

This AC contains minimum performance specifications for systems and equipment airports use to provide a warning to drivers on an airfield about a potential runway incursion.

This joint Flight Standards Service (AFS) and Aircraft Certification Service (AIR) advisory circular (AC) contains guidance on the operational use of Electronic Flight Bags (EFBs).

This advisory circular (AC) provides guidance to flightcrew members and other airmen on the use of data link to access Flight Information Services (FIS).

This AC provides guidance to assist operators in planning, designing, and constructing seaplane bases and associated facilities.

This AC contains a specification for wind cone assemblies to be used to provide wind information to pilots.

Contains the FAA standards for markings used on airport runways, taxiways, and aprons. This AC cancels the Signs and Marking Supplement (SAMS).

Provides guidance and recommendations on the installation of airport visual aids. Because of the size of the document, it is available as one large file (see Complete) or as four smaller files (see Parts 1-4).

This advisory circular (AC) provides information that may be used to comply with the provisions of Title 49 of the United States Code (49 U.S.C.)

Provides guidelines for operational safety on airports during construction. Principal changes include prohibiting construction in safety areas when associated runway or taxiway is open, providing guidance for incorporating safety risk management, and including checklists for writing Construction Safety and Phasing Plans (CSPP) and for daily inspections.

The Federal Aviation Administration (FAA) is amending its regulations to adopt specific rules for the operation of small Unmanned Aircraft Systems (sUAS) in the National Airspace System (NAS) through a final rule.

On November 8, 2007, the Federal Aviation Administration (FAA) published the Enhanced Airworthiness Program for Airplane Systems/Fuel Tank Safety (EAPAS/FTS) final rule.

Provides guidance and recommendations on the installation of airport visual aids.

See also--

• The Design, Installation, and Maintenance of In-Pavement Airport Lighting (PDF) by Arthur S.

The Federal Aviation Administration (FAA) has issued a new rule contained in Title 14 of the Code of Federal Regulations (14 CFR) part 91, §§ 91.225 and 91.227.

This AC explains the importance of reporting collisions between aircraft and wildlife, more commonly referred to as wildlife strikes.

This AC contains the specifications for airport light bases, transformer housings, junction boxes, and accessories.

a. This AC describes an acceptable means, but not the only means, for showing compliance with the applicable airworthiness regulations for the software aspects of airborne systems and equipment certification.

This AC provides standards and recommendations for use in the design of aircraft deicing facilities.

Provides guidance for compliance with the provisions of 14 CFR Part 25 of the Federal Aviation Regulations (FAR) pertaining to the damage-tolerance and fatigue evaluation requirements for transport category aircraft structure.

This advisory circular (AC) provides information and guidance concerning an acceptable means, but not the only means, of demonstrating compliance with the requirements of Title 14 of the Code of Federal Regulations (14 CFR) parts 21, 23, 25, 26, 27, 29, 31, 33, 35, 43, 91, 121, 125, (U.S.

This joint Flight Standards Service (AFS) and Aircraft Certification Service (AIR) advisory circular (AC) contains guidance on the operational use of Electronic Flight Bags (EFB).

a. This advisory circular (AC) supports the use of Flight Information Services - Broadcast (FIS-B) weather and other aeronautical data link products for enhanced situation awareness of flight conditions.

This advisory circular (AC) provides applicants with guidance for obtaining an airworthiness approval for traffic alert collision avoidance systems II (TCAS II).

This AC provides guidance and recommendations about the installation of airport visual aids.

See also--

• The Design, Installation, and Maintenance of In-Pavement Airport Lighting (PDF) by Arthur S.

This advisory circular (AC) provides information for Title 14 of the Code of Federal Regulations (14 CFR) part 121 air carriers that are required to implement Safety Management Systems (SMS) based on 14 CFR part 5.

This Advisory Circular (AC) provides guidance for the submission and approval of special instrument flight procedures developed by non-FAA service providers and submitted to the Federal Aviation Administration (FAA) for review and approval.

This AC provides the specifications and technical requirements for data collection conducted at airports in support of the FAA Airport Surveying – Geographic Information System (GIS) Program.

This Advisory Circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the ice protection requirements in Title 14 of the Code of Federal Regulations (14 CFR) part 23.

This advisory circular (AC) provides updated information and guidance to the aviation community for detecting suspected unapproved parts (SUP) and reporting them to the Federal Aviation Administration (FAA).

Contains FAA specifications for light fixtures to be used on airport runways and taxiways. See also--

• Engineering Brief 67: Light Sources Other than Incandescent and Xenon for Airport and Obstruction Lighting Fixtures

The Pilot Records Improvement Act of 1996 (PRIA), as amended, was enacted to ensure that air carriers and air operators adequately investigate a pilot’s background before allowing that pilot to conduct commercial air carrier flights.

This advisory circular (AC) describes how pilots can exercise student, recreational, and private pilot privileges in certain small aircraft without holding a current medical certificate.

This circular provides guidelines for more reliable nickel-cadmium battery operation through proper operational and maintenance practices, and has been reissued to include reconditioning information.

This advisory circular (AC) provides standards and guidelines for obtaining approval and for operating Aircraft Dispatcher Certification Courses, which are approved by the Federal Aviation Administration (FAA), in accordance with Title 14 of the Code of Federal Regulations (14 CFR) part 65 subpart C.

This circular sets forth one means that would be acceptable to the Administrator for approval of aircraft simulators or other trainirie devices requiring approval under FAR 121.407.

This advisory circular (AC) provides information and guidance concerning an acceptable means, but not the only means , of showing compliance with Part 23 of the Federal Aviation Regulations (FAR) , applicable to approval procedures and installation of turbochargers in small airplanes.

This AC provides an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (FS) aviation safety inspectors (ASI) outside the United States.

This advisory circular sets forth one means that would be acceptable to the Administrator for the evaluation of airplane simulators to be used in training programs or for airmen checking under Title 14 Code of Federal Regulations (CFR).

This advisory circular (AC) provides guidance and basic information on the certification processes for a Title 14 of the Code of Federal Regulations (14 CFR) parts 121 and 135 Air Carrier or Operating Certificate.

This Advisory Circular (AC) describes the standards and provides guidance in the development of a Surface Movement Guidance and Control System (SMGCS) plan for U.S. airports where scheduled Air Carriers are authorized to conduct operations when the visibility is less than 1,200 feet runway visual range (RVR).

This Advisory Circular (AC) provides guidance for identifying computing system safety items, developing safety requirements for each computing system safety item, and mitigating the risks presented by computing system safety items in accordance with 14 CFR § 450.141.

This Advisory Circular (AC) provides guidance and a comprehensive method for performing a high fidelity flight safety analysis in accordance with title 14 of the Code of Federal Regulations (14 CFR) § 450.115.

This Advisory Circular (AC) provides guidance and a comprehensive method for performing a high fidelity flight safety analysis in accordance with title 14 of the Code of Federal Regulations (14 CFR) § 450.115.

This advisory circular (AC) provides guidance to holders ofcertificates under Ti tie 14 of the Code of Federal Regulations (CFR) parts 119 and 125 and foreign air carriers issued operations specifications under 14 CFR part 129 (operators) who voluntarily disclose to the Federal Aviation Administration (FAA) their violation(s) ofcertain hazardous materials regulations (HMR) under this voluntary disclosure reporting program (VDRP).

This AC transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (AFS) aviation safety inspectors (ASI) outside the United States.

This AC calls attention to regulatory requirements, recommended operations, and communications procedures for operating at an airport without a control tower or an airport with a control tower that operates only part time.

This AC provides interim safety guidance to individuals operating unmanned aircraft, often referred to as drones, for recreational purposes under the statutory exception for limited recreational operations of unmanned aircraft (Title 49 of the United States Code (49 U.S.C) § 44809).

This AC provides updated information regarding the items that are required or recommended content in oral passenger safety briefings and on safety information briefing cards.

This AC transmits an updated schedule of charges for services of Federal Aviation Administration (FAA) Flight Standards Service (FS) aviation safety inspectors (ASI) outside the United States.

This advisory circular (AC) provides guidelines for establishing, implementing, and maintaining a drug and alcohol testing program in accordance with Title 14 of the Code of Federal Regulations (14 CFR), part 120 and Title 49 of the CFR (49 CFR) part 40.

Provides information and guidance concerning compliance with Part 23 of the Federal Aviation Regulations (FAR) concerning flight tests and pilot judgments.

Establishes an acceptable means, but not the only means, of obtaining airworthiness approval of Global Positioning System (GPS) equipment for use as a supplemental navigation system for oceanic and remote domestic en route, terminal, and non-precision instrument approach (except localizer directional aid (LDA) and simplified directional facility (SDF) operations.

Assists pilots involved in aviation operations to diagnose the potential for severe wind events in the vicinity of mountainous areas.

Provides information for pilots regarding the hazards of aircraft icing and the use of airplane deice and anti-ice systems.

Provides an acceptable means of compliance with Part 23 of the FAR for type certification of certain small airplanes.

Contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.

This AC provides an acceptable means of showing compliance with the underwater locating device (ULD) requirements of the Federal Aviation Regulations for recorder ULD’s.

Provides guidance on understanding, identifying, preventing, and mitigating alkali-silica reactivity (ASR) in fresh and hardened Portland cement concrete airfield pavements.

Provides information and guidance concerning and acceptable means, but not the only means, of demonstrating compliance with the requirements of FAR Part 21, Certification Procedures for Products and Parts, regarding quality control (QC) systems for the manufacture of composite structures involving fiber reinforced materials, e.g., carbon (graphite), boron, aramid (Kevlar), and glass reinforced polymeric materials.

Describes the types of conditions under which the FAA may impose a temporary flight restriction.

Introduces the concept of a safety management system (SMS) to aviation service providers.

Provides information relating to the substantiation of ice protection systems on aircraft.

Sets forth an acceptable, but not the only, means of showing compliance with the provisions of FAR Parts 23, 25, 27, and 29 regarding airworthiness type certification requirements of composite aircraft structures involving fiber reinforced materials, e.g., carbon (graphite), boron, aramid (kevlar), and glass reinforced plastics.

Alerts the aviation community to the potential hazards created by unintentional keying of microphones resulting in radio transmissions from airborne, mobile, and ground based radio transmitters and gives guidance on alleviating ensuing hazards.

Provides information and guidance regarding airworthiness and operational approval of airborne equipment/systems in accordance with FAR 135.153(b) and (c).

Announces the availability of Airport Self Inspection Videotape and tells how it can be obtained.

Provides an acceptable means of compliance with Part 23 of the FAR for type certification of certain small airplanes.

Contains performance standards, specifications, and recommendations for the design, construction, and testing of a family of small, dual agent aircraft rescue and fire fighting (ARFF) vehicles.

Contains a specification for constant current regulators used on airport lighting circuits and for a monitor that reports on the status of the regulator.

Provides guidance material on how to evaluate whether data processes comply with the requirements of RTCA/DO-200A, Standards for Processing Aeronautical Data.

Describes a system for the voluntary accreditation of civil aircraft parts distributors on the basis of voluntary industry oversight and provides information that may be used for developing accreditation programs.

Provides a means, but not the only means, to control products and parts shipped prior to the issuance of a type certificate or supplemental type certificate by a manufacturer with an approved production inspection system or production certificate.

Demonstrates how existing federal regulations on obtaining a license to conduct a reusable launch vehicle (RLV) mission(s) may be used to obtain a license to conduct RLV missions for test flight purposes (referred to herein as test flight missions) while an RLV is under development.

Discusses the potential hazard associated with the sublimation of dry ice aboard aircraft. Precautionary measures and simple rules of thumb are indicated in order to preclude environmentally hazardous conditions affecting crews and passengers aboard aircraft.

States an acceptable means, not the only means, of compliance with the referenced sections of the FAR as they apply to persons operating under Parts 121 or 123 who desire approval of Doppler RADAR navigation systems or Inertial Navigation Systems (INS) for use in their operations.

Provides information and guidance concerning an acceptable means of demonstrating compliance with the requirements of Part 23 of the Federal Aviation Regulations (FAR) regarding fatigue and fail-safe evaluation of metallic airplane structure.

Establishes an acceptable means, but not the only means, of obtaining airworthiness approval of an airborne vertical navigation system for use under visual flight rules (VFR) and instrument flight rules (IFR) within the conterminous United States, Alaska and surrounding U.S. waters.

Provides an acceptable means, but not the only means, to show compliance with the quality assurance requirements of FAR Par 21, Certification Procedures for Products and Parts, as applicable to the production of software used in type certificated aircraft or related products (airborne software).

Provides information on course and reference materials for training of aircraft and firefighting (ARFF) personnel.

Provides airport sponsors with guidance for complying with the airport financial reporting requirements.

Provides guidance for engineers, airport managers, and the public in the design and maintenance of airport surface drainage systems.

Describes how insurance policies obtained by licensees to meet the requirements of 14 CFR Part 440 may satisfy certain conditions of coverage.

Suggests standards and procedures for the acquisition, use, and storage of pyrotechnic visual distress signaling devices that are intended for use in aircraft emergencies.

This advisory circular (AC) sets forth an acceptable means, but not the only means, of demonstrating compliance with the ice protection requirements in Title 14 of the Code of Federal Regulations (14 CFR) Part 23.

Explains the specifications for establishing geodetic control on or near an airport. It also describes how to submit the information to the National Geodetic Survey (NGS) for approval and to be included in the National Spatial Reference System (NSRS) in support of aeronautical information surveys.

Outlines acceptable means, but not the sole means, for showing compliance with the requirements of the FARs concerning propeller vibration.

Provides general information and guidance concerning issuance of airworthiness certificates for U.S. registered aircraft, and issuance of special flight authorizations for operation in the United States of foreign aircraft not having standard airworthiness certificates issued by the country of registry.

Outlines acceptable means, but not the sole means, for showing compliance with the requirements of the FARs concerning propeller vibration.

Provides many answers to questions regarding the purchasing of surplus military aircraft (type certification, is the aircraft flyable, is it sold for spare parts, scrap?).

Provides maintenance inspection notes which can be used for the maintenance support program for certain structural parts of the B-707/720 series aircraft.

Describes the Service Difficulty Program as it applies to general aviation activities. Instructions for completion of the revised FAA Form 8010-4 (10-92), Malfunction or Defect Report, are provided.

This advisory circular (AC) guides airworthiness approval of Traffic Alert and Collision Avoidance Systems (TCAS II) Version 7.0 certified to technical standard order (TSO)-C119b, and associated Mode S transponders.

Provides guidance on asphalt paving operations, including project organization, mix design, quality control, plant operations, laydown, and compaction.

Outlines, and encourages voluntary compliance with, safety standards for model aircraft operators.

The purpose of this AC is to provide information and practices that can be used to prevent injuries caused by turbulence

This Advisory Circular (AC) provides acceptable certification methods, but not necessarily the only acceptable methods, for demonstrating compliance with the crashworthiness requirements of part 25, as amended through Amendment 25-112, of Title 14 of the Code of Federal Regulations (14 CFR) for transport category airplanes.

Provides guidance for the use of value engineering (VE) in airport projects funded under the Airport Grant Program.

Provides information for aircraft operators from the United States who plan to conduct specialty air services (SAS) operations in Canada or Mexico in accordance with the North American Free Trade Agreement.

This AC will guide you in obtaining a design and production approval inder Technical Standard Order (TSO) C-165, Electronic Map Display Equipment for Graphical Depiction of Aircraft Position, for the software used to provide an airport moving map display(AMMD) intended for use on a Class 2 electronic flight bag (EFB).

Describes the types of conditions under which the FAA may impose a temporary flight restriction. Also explains which elements have been delegated authority by the Administrator to issue TFR’s and lists the types of responsible agencies/offices from which the FAA will accept requests to establish TFR’s.

Provides direction for the security control of civil and military air traffic during an air defense emergency.

This AC describes the process for any person or organization that provides access to aviation weather and notices to Airmen (NOTAMS) via the public Internet to become a qualified Internet communications provider (QICP)

Calls attention to RTCA, Inc., (formerly the Radio Technical Commission for Aeronautics) Document RTCA/DO- 178B, “Software Considerations in Airborne Systems and Equipment Certification,” issued December 1992.

Provides information and guidance concerning an acceptable means, but not the only means, of compliance with Parts 23, 25, 27, and 29 of the FAR as applicable for preventing hazardous effects, due to lightning, from occurring to electrical/electronic systems performing critical essential functions.

Describes the standards for markings used on airport runways, taxiways, and aprons.

Provides information concerning Subpart G of Federal Aviation Regulations (FAR) Part 21, and sets forth acceptable means of compliance with its requirements.

Replaces all references to AC 150/5345-1 with AC 150/5345-53.

Provides an up-to-date and expanded text for pilots and other flight operations personnel whose interest in meteorology is primarily in its application to flying.

Sets forth acceptable means, but not the only means, of obtaining authorization to operate within specified airspace over the North Atlantic, designated as the NAT (North Atlantic) MNPS (Minimum Navigation Performance Specifications) airspace, after 0001 Greenwich Mean Time, Dec. 29, 1977.

Provides guidance for the development and implementation of standard pilot procedures for conducting safe aircraft operations on the airport surface.

Sets forth an acceptable means, but not the sole means, of complying with the requirements of the Federal Aviation Regulations (FAR’s) applicable to the installation on transport category airplanes of cargo load devices approved as meeting the criteria in NAS 3610.

Describes acceptable methods and guidelines for developing takeoff and initial climb-out airport obstacle analyses and in-flight procedures to comply with the intent of the regulatory requirements of Title 14 of the Code of Federal Regulations part 121,§§ 121.177, 121.189, and part 135, §§ 135.367, 135.379 and powered airplanes operated under parts 121 and 135

Provides guidance on the selection, documentation, and control of Certification Maintenance Requirements (CMR’s).

Sets forth one means that would be acceptable to the Administrator to assist persons in complying with the requirements of FAR Part 125.

Warns general aviation aircraft owner/pilots and maintenance personnel of possible total electrical system failure following aircraft engine starting.

Explains the requirement and use of FAA Form 8000-39, Aviation Safety Inspector Identification Card, and its relation to the Aviation Safety Credential, FAA Form 110A.

Contains the specifications requirements for series-to-series isolation transformers for use in airport lighting systems.

Makes available to interested persons copies of all current U.S. Bilateral Airworthiness Agreements (BAA) together with an explanation of their intent.

RTCA/DO-160E, “Environmental Conditions and Test Procedures for Airborne Equipment,” dated December 9, 2004, as containing acceptable environmental qualifications for showing compliance with certain airworthiness requirements.

Provides guidelines for more reliable nickel-cadmium battery operation through proper operational and maintenance practices, and has been reissued to include reconditioning information.

Provides basic information about the FAA's recommendations on commercial minimum standards and related policies.

Introduces the concept of a safety management system (SMS) for airport operators.

This advisory circular (AC) contains information and guidance to be used by data base vendors that develop data for use in the National Airspace System (NAS) for the non precision GPS overlay program.

This Advisory Circular provides guidance to aircraft flight crewmembers and other airmen for the use of Flight Information Services Data Link (FISDL) systems

Provides standards, specifications, and guidance for designing aircraft deicing facilities. Note: Column No. 1 of Table 3-1 in this AC is cancelled and should be replaced with Column No. 1 of Table 3-2.

Provides a means whereby air taxi operators may submit a maintenance program to comply with FAR Part 135, Section 135.91.

Provides guidelines and procedures for maintaining rigid and flexible airport pavements.

Because of the size of this document, it is available as one large file (see Complete) or as several smaller files (see Parts 1-3).

Transmits a directory of all FAA Certificated Pilot Schools

Provides acceptable procedures for approving the qualification of fuels, lubricants, and additives for use in certificated aircraft engines.

Describes standardized procedures for requesting field approvals for certificated products. It describes the field approval process, data that supports making an alteration or repair, and the purpose and uses of the Aircraft Flight Manual Supplements (AFMS) and Instructions for Continued Airworthiness (ICA).

Provides information on trade opportunity programs and publications relating to foreign airport planning, design, and construction.

Transmits a directory of all FAA Certificated Pilot Schools

Provides information on acceptable methods of testing altimeters, static systems, altitude encoders, and Air Traffic Control (ATC) transponder systems.

Appendixes 1 and 2 contain the latest list of reference materials and subject matter knowledge codes for airman knowledge testing.

Announces the renumbering of airman training and testing materials published by the Airman Testing Standards Branch, AFS-630, Oklahoma City, OK

Provides information and guidance which should be used by “indirect air carriers” when accepting and handling property to be carried by “air carriers”’ or by the operator of any civil aircraft for transportation in air commerce.

Discusses the potential hazard associated with the sublimation of dry ice aboard aircraft. Precautionary measures and simple rules of thumb are indicated in order to preclude environmentally hazardous conditions affecting crews and passengers aboard aircraft.

Sets forth an equivalent means of complying with the provisions of Part 25 of the Federal Aviation Regulations (FAR) pertaining to the certification requirements of active flight controls.

Provides guidance material for acceptable means for demonstrating compliance with the provisions of part 25 of the FAR dealing with the design requirements for transport category airplanes to preclude the aeroelastic instabilities of flutter, divergence and control reversal.

Sets forth acceptable means of compliance with the provisions of Part 25 of the Federal Aviation Regulations (FAR) dealing with the certification requirements of fuselage doors.

Gives means for compliance with flight requirements in various CAR’s. Change 2, Transmits revised information about the time delay of automatic stabilization equipment.

Transmits a consolidated directory of all FAA Certificated Repair Stations certificated under the authority of Title 14 of the Code of Federal Regulations (14 CFR) Part 145.

Transmits a directory of Federal Aviation Administration certificated Aviation Maintenance technician schools certificated by FAA under CFR 14 part 147.

Provides information concerning an acceptable means, but not the only means, that should be used by repair station certificate holders in the U.S. to obtain Joint Aviation Authorities (JAA) and foreign National Aviation Authority (NAA) acceptance under the provisions of Maintenance Implementation Procedures (MIP) concluded pursuant to a Bilateral Aviation Safety Agreement.

Provides information concerning an acceptable means, but not the only means, that should be used by repair station certificate holders in the U.S. to obtain Joint Aviation Authorities (JAA) and foreign National Aviation Authority (NAA) acceptance under the provisions of Maintenance Implementation Procedures (MIP) concluded pursuant to a Bilateral Aviation Safety Agreement.

This advisory circular announces the availability of the National Plan of Integrated Airport Sys- tems (NPIAS) 1993-1997.

Provides guidelines to assist FAA-certificated aviation maintenance technician schools when crediting servicemen/women and veterans in the evaluation of aviation training completed while in the military.

Provides information and guidance materials which may be used to design or develop maintenance reliability programs utilizing reliability control methods.

Provides one means, but not the only means, for obtaining approval of a weight and balance control system.

Explains how to compute airport capacity and aircraft delay for airport planning and design. Reflects the increased capacity resulting from the recent change in parallel runway separation criteria, adds a procedure for calculating savings associated with a reduction in aircraft delay, and updates the capacity and delay computer program references.

Sets forth acceptable means, but not the only means, for operators certificated under FAR Parts 121 and 123 and operators utilizing large aircraft under FAR 135.2, to obtain approval to operate within a specific airspace over the NAT (North Atlantic) MNPS (Minimum Navigation Performance Specifications) airspace after 0001 Greenwich Mean Time, Dec. 29, 1977.

Contains guidance relating to type certification of aircraft engines which will constitute acceptable means, although not the sole means, of compliance with the Federal Aviation Regulations.

States an acceptable means but not the only means for obtaining approval under FAR Section 121.161 for two-engine airplanes to operate over a route that contains a point farther than one hour flying time at the normal one-engine inoperative cruise speed (in still air) from an adequate airport.

Sets forth guidance and acceptable means, not the sole means, by which compliance may be shown with the turbine and compressor rotor substantiation requirements in FAR Part 33.

Incorporates new mandatory hold signs that reflect changed standards for the Precision Obstacle Free Zone (POFZ) and Category (CAT II/III ) operations.

Provides an acceptable means of ensuring compliance with the FAR regarding the evaluation and qualification of all training devices in which flight training, qualification, or certification of airmen under Title 14, Code of Federal Regulations, is accomplished.

Establishes an acceptable means of obtaining airworthiness and operational approval of Airborne Omega Navigational Systems as a sole means of long range navigation for operations conducted outside the United States in accordance with FAR 121, 123, or large aircraft operated under FAR 135.2.

Provides the specifications for Airport Imagery Acquisition and how to submit the imagery to the National Geodetic Survey for approval in support of aeronautical information and airport engineering surveys.

Furnishes general guidance for airport, employees, airport management, and other personnel responsible for firefighting and rescue operations, at the scene of an aircraft accident, and on the proper presentation of evidence.

Contains standards for the planning, design, and installation of EMAS in runway safety areas.

Describes the specification requirements for L-824 electrical cables.

Provides the specified manufacturing requirements for panels used for remote control of airport lighting and auxiliary systems.

Announces the availability of two training programs on aircraft taxi procedures and tug and tow procedures, and also provides information about how to acquire these programs

Designed to familiarize student mechanics with the construction, theory of operation, and maintenance of aircraft powerplants.

Provides information to persons interested in becoming certificated parachute riggers. Provides information on how to apply for a parachute rigger certificate and ratings, and assists the applicant in preparing for the written, oral, and practical tests.

Provides noise level data for airplanes certificated under FAR Part 36. Noise level data for foreign airplanes certificated to ICAO Annex 16 standards are also provided in a separate appendix for informational purposes.

Encompasses the basic labor and associated requirements for the airport grant program. It is intended for sponsors using program assistance and for contractors and subcontractors working on projects under the program.

Sets forth an acceptable means for complying with rules governing the installation of inertial navigation systems in transport category aircraft.

Provides guidance for the preparation of an Operations Specification--Preface Page which will afford nominal and reasonable relief from approved service and overhaul time limits when a part is borrowed from another operator.

Transmits a directory of air carriers certificated by the FAA under the provisions of Title 14 of the Code of Federal Regulations (14 CFR Part 135).

Transmits a directory of air carriers certificated by the FAA under the provisions of Title 14 of the Code of Federal Regulations (14 CFR Part 135).

Describes methods used in ultrasonic nondestructive testing, discusses the many advantages, and points out the simplicity of the tests.

Transmits a directory of all FAA Certificated Pilot Schools

Transmits a directory of all FAA Certificated Pilot Schools

Provides guidance and information relative to the airworthiness certification and operation of amateur-built aircraft.

Provides guidelines for the planning and design of airport terminal buildings and related access facilities.

Provides guidance for airman applicants, training organizations, designated examiners, and aviation safety inspectors in determining English language skills required for airman certification under Title 14 of the Code of Federal Regulations (14 CFR) parts 61,63 and 65.

Acquaints pilots with the hazards of disorientation caused by loss of visual reference with the surface.

Sets forth an acceptable means, but not the only means, by which compliance may be shown with FAR 25.253 during certification flight tests.

Provides guidance material on a means, but not the only means, of compliance with the FAR concerning (1) conduct of full-scale emergency evacuation demonstrations, and (2) use analysis and tests for emergency evacuation demonstrations in lieu of conducting an actual demonstration.

This advisory circular (AC) provides guidance for certification of airframe ice protection systems on transport category airplanes.

Provides guidance regarding an acceptable means but not the only means of compliance with Part 27 of the Federal Aviation Regulations (FAR) applicable to certification of normal category rotorcraft.

This advisory circular (AC) provides guidance for certification of airframe ice protection systems on transport category airplanes.

Transmits a consolidated directory of all FAA Certificated Repair Stations certificated under the authority of Title 14 of the Code of Federal Regulations (14 CFR) Part 145.

Provides information and guidance concerning an acceptable means, but not the only means, that may be used by a Joint Aviation Authorities (JAA) Approved Maintenance Organization (AMO) to obtain, renew, or amend a FAR Part 145 repair station certificate under the provisions of Maintenance Implementation Procedures (MIP) concluded pursuant to a Bilateral Aviation Safety Agreement (BASA).

Defines the criteria and procedures required for an International Civil Aviation Organization (ICAO) three-letter and/or telephony designator assignment.