« Back to Advisory Circulars main page

Will search within "Certification: Pilots and Flight Instructors" only. Search all ACs.

18 results

Export to MS Excel

Search results
Number Office Title Date
61-136A AFS-800 FAA Approval of Aviation Training Devices and Their Use for Training and Experience

This advisory circular (AC) provides information and guidance for Aviation Training Device (ATD) manufacturers seeking Federal Aviation Administration (FAA) approval of basic aviation training devices (BATD) or advanced aviation training devices (AATD) under Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.4(c). This AC also provides information and guidance for those persons who intend to use a BATD or AATD for activities involving pilot training and experience, other than for practical tests, aircraft-type-specific training, or an aircraft type rating. This AC contains specific procedures regarding the evaluation, approval, and use of an ATD under 14 CFR parts 61 and 141. The criteria specified in this AC are used by the FAA to determine whether an ATD is qualified for approval as a BATD or an AATD. These guidelines have developed from extensive FAA and industry experience in determining methods of compliance with the pertinent 14 CFR regulations. Applicable regulations are noted only for reference. This AC does not change regulatory requirements; therefore, the provisions of the current regulation always control. This AC applies only to the evaluation and use of BATDs and AATDs. This notice does not apply to full flight simulators (FFS) and flight training devices (FTD) that are regulated under 14 CFR part 60.

61-138 AFS-200 Airline Transport Pilot Certification Training Program

This advisory circular (AC) provides information and courseware guidelines to authorized providers, to aid in the development of a training program which meets the requirements of Title 14 Code of Federal Regulations (14 CFR) part 61, § 61.156.

61-107B AFS-800 Aircraft Operations at Altitudes Above 25,000 Feet Mean Sea Level or Mach Numbers Greater Than .75

This advisory circular (AC) alerts pilots transitioning from aircraft with less performance capability to complex, high-performance aircraft that are capable of operating at high altitudes and high airspeeds. In particular, this AC stresses special physiological, equipment, and aerodynamic considerations involved in these kinds of operations. It also provides information to aid pilots in becoming familiar with the basic phenomena associated with high-altitude and high-speed flight.

Title 14 of the Code of Federal Regulations (14 CFR) part 61 prescribes the knowledge and skill requirements for the various airman certificates and ratings, including category, class, and type ratings authorized to be placed thereon. The civil aircraft fleet consists of numerous aircraft capable of high-altitude flight. Certain knowledge elements of high-altitude flight are essential for the pilots of these aircraft. As required by 14 CFR § 61.31, pilots who fly at altitudes at or above FL250 in a pressurized aircraft must receive training in the critical factors relating to safe flight operations under those circumstances. These critical elements include knowledge of the special physiological and/or aerodynamic considerations that should be given to highperformance aircraft operating in the high-altitude environment. High-altitude flight has different effects on the human body than those experienced during lower altitude flight. An aircraft's aerodynamic characteristics displayed in high altitude flight may differ significantly from those experienced when penetrating at a lower altitude. Knowledge of and skill in operating high-performance aircraft will enhance the pilot's ability to easily transition into aircraft capable of high speed, high altitude flight.

61-98B AFS-800 Currency Requirements and Guidance for the Flight Review and Instrument Proficiency Check

This advisory circular (AC) provides information for certificated pilots and flight instructors to use in complying with the flight review required by Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.56 and the recent flight experience requirements of § 61.57. This AC is particularly directed to General Aviation (GA) pilots holding sport or higher grades of pilot certificates who wish to maintain currency and to certificated flight instructors (CFI) who give flight instruction to support such activities. This AC does not apply to training programs or proficiency checks conducted pursuant to 14 CFR part 121 or 135, nor to curriculums approved pursuant to 14 CFR part 142.

61-83G AFS-800 Nationally Scheduled FAA-Approved Industry-Conducted Flight Instructor Refresher Course



This advisory circular (AC) provides information for the preparation and approval of training course outlines (TCO) for Federal Aviation Administration (FAA)-approved, industry-conducted flight instructor refresher courses (FIRC) in accordance with Title 14 of the Code of Federal Regulations (14 CFR) part 61, § 61.197(a)(2)(iii). The FIRC is intended to keep flight instructors informed of the changing world of General Aviation (GA) flight training, and to enhance aviation safety through continued refresher training of the flight instructor cadre. It is one of several methods by which a flight instructor may renew his or her flight instructor certificate. Adherence to this AC provides one acceptable method by which the FAA may approve the FIRC program. Effective August 4, 1997, the holder of a pilot school certificate issued under 14 CFR part 141 may also obtain approval to provide a FIRC program under the authority of part 141 appendix K, paragraph 11. The holder of a part 141 pilot school certificate that desires to offer a FIRC program under their Air Agency Certificate should refer to this AC, which may be helpful as guidance in developing the TCO for FAA approval.

61-137A AFS-800 Approval of Manufacturer's Required Training Program.

This advisory circular (AC) provides information to organizations providing training in aircraft that contain a training requirement in the limitations section of the Airplane Flight Manual (Aircraft Flight Manual (AFM), Rotorcraft Flight Manual (RFM), etc.).

61-135 AFS-810 Conversion Procedures and Processes for FAA Pilot Certificates and TCCA Pilot Licenses



The Federal Aviation Administration (FAA) is issuing this advisory circular (AC) to announce the establishment of new pilot licensing/certification conversion procedures for Canadian pilot license holders and United States pilot certificate holders.

61-65E AFS-800 Certification: Pilots and Flight and Ground Instructors Provides guidance for pilots and flight instructors on the certification standards, written test procedures, and other requirements contained in FAR Part 61. 11-29-2005
61-134 AFS-800 General Aviation Controlled Flight into Terrain Awareness Highlights the inherent risk that controlled flight into terrain (CFIT) poses for general aviation (GA) pilots. This AC includes the Federal Aviation Administration's (FAA) common definition of the term CFIT, identifies some, but not all, of the risks associated with GA CFIT accidents, and provides some recommendations and strategies to combat CFIT within the GA community. This AC is not an all-inclusive document on CFIT; rather, this AC is designed to help flight instructors, FAA Aviation Safety Program Managers, and other trainers develop CFIT training materials by identifying some of the factors involved in GA CFIT accidents. 04-01-2003
61-67C AFS-840 Stall and Spin Awareness Training 09-25-2000
61-89E AFS-630 Pilot Certificates: Aircraft Type Ratings Provides a generic type rating curriculum that may serve as a basis for schools to develop a training requirements of Federal Aviation Regulations Parts 61 and 141. 08-04-2000
61-126 AFS-840 Qualification and Approval of Personal Computer-Based Aviation Training Devices Provides information and guidance to potential training device manufacturers and aviation training consumers concerning a means, acceptable to the Administrator, by which personal computer-based aviation training devices (PCATD) may be qualified and approved for flight training toward satisfying the instrument rating training under the provisions of 14 CFR parts 61 and 141. 05-12-1997
61-103 AFS-840 Announcement of Availability: Industry-Developed Transition Training Guidelines for High Performance Aircraft Alerts pilots transitioning to complex, high-performance aircraft which are capable of operating at high altitudes and high airspeeds of the need to be knowledgeable of the special physiological and aerodynamic considerations involved within this realm of operations. 05-23-1989
61-84B AFS-840 Role of Preflight Preparation Modifies and updates the flight information available to pilots as a result of changes in the basic Airmen Information Manual format. 03-18-1985
61-94 AFS-840 Pilot Transition Course for Self Launching or Powered Sailplanes (Motorgliders) Provides recommendations, but is not the only means, that may be used by glider pilots who desire to transition into sailplanes or gliders with self-launching capability. 07-31-1984
61-47A AFS-820 Use of Approach Slope Indicators for Pilot Training This advisory circular informs pilot schools, flight instructors, and student IJilots of the recommendation of the Federal Aviation Administration for the use of approach slope indicator systems for pilot training. 03-26-1979
61-9B AFS-630 Pilot Transition Courses for Complex Single Engine and Light, Twin-Engine Airplanes A guide to the procedures and standards to be followed for a thorough and comprehensive checkout in modern single- and twin-engine aircraft. SN 050-007-00226-2 01-15-1974
61-10A AFS-630 Private and Commercial Pilots Refresher Courses Provides a syllabus of study requirements and describes the areas of training that should be emphasized. SN 050-011-00060-7 09-27-1972

18 results

Export to MS Excel