Design and Installation Details for Airport Visual Aids
This AC provides guidance and recommendations on the installation of airport visual aids. See the Principal Changes paragraph for a list of major changes to the document since the last version.
Operational Safety on Airports During Construction
This AC sets forth guidelines for operational safety on airports during construction. This version adds notification about impacts to both airport-owned and FAA-owned NAVAIDs; adds guidance for the use of orange construction signs (including a new appendix on the placement of these signs); discusses open trenches or excavations in the taxiway safety area while the taxiway is open to aircraft operations, subject to restrictions; enhances guidance for temporary shortened runways and displaced thresholds; and improves figures.
Access to Airports by Individuals with Disabilities
This AC assist airports in complying with the laws and regulations regarding individuals with disabilities by: (1) identifying the relevant statutes and regulations affecting airports; (2) presenting the main features of each of the statutes and regulations; and (3) listing sources of assistance or additional information. It presents and reconciles the Federal accessibility regulations implementing the Americans with Disabilities Act of 1990 (ADA); the Air Carrier Access Act of 1986 (ACAA) as amended; the Rehabilitation Act of 1973, as amended (RA); and the Architectural Barriers Act of 1968, as amended (ABA) which affect the architectural or program accessibility of airports in the U. S. transportation system and employment opportunities at these airports for individuals with disabilities.
This update adds the requirements and recommendations for Service Animal Relief Areas (SARAs) at civil use airports contained in the DOT regulation 14 CFR 382, Nondiscrimination on the Basis of Disability in Air Travel. SARAs are required for each airport with 10,000 or more enplanements and for civil use airports that receive federal financial assistance through the Airport Improvement Program or Passenger Facility Charges program.
Land Acquisition and Relocation Assistance for Airport Improvement Program Assisted Projects (Consolidated through Change 7)
Provides guidance to sponsors of airport projects developed under the Airport Improvement Program (AIP) to meet the requirements of the Uniform Relocation Assistance and Real Property Acquisition Policies Act of 1970 (PL 91-646, as amended) and the Regulations of the Office of the Secretary of Transportation, 49 CFR Part 24. Consolidated AC includes Changes 1-7.
Critical Aircraft and Regular Use Determination
This advisory circular (AC) defines the term Critical Aircraft and provides guidance on the use of Critical Aircraft in facility planning and design studies, and related FAA decision making, for federally obligated airports. It also defines the term "Regular Use", which replaces the term "Substantial Use" that was used in previous definitions of Critical Aircraft. This AC does not establish project justification for Federal Airport Improvement Program (AIP) funding.
|150/5220-16E||AJW-144||Automated Weather Observing Systems (AWOS) for Non-Federal Applications This advisory circular (AC) contains the Federal Aviation Administration’s (FAA) standard for the non-Federal AWOS. This AC applies to anyone proposing to design,manufacture, procure, install, activate or maintain an AWOS for aviation purposes.||03-10-2017|
Specification L-854, Radio Control Equipment
This AC contains the specifications for radio control equipment to be used for controlling airport lighting facilities.
Notices to Airmen (NOTAMs) for Airport Operators
This AC provides guidance on using the NOTAM system for reporting airport facilities changes or outages and for utilizing the Runway Condition Assessment Matrix for airport condition reporting. This AC prescribes procedures used to describe, format, and disseminate information on unanticipated or temporary changes to components of, or hazards in, the National Airspace System (NAS).
Airport Pavement Design and Evaluation
This advisory circular provides guidance to the public on the design and evaluation of pavements used by aircraft at civil airports.
State Block Grant Program
This AC provides guidance for application to and implementation of the State Block Grant Program (SBGP). It is intended for states and airport sponsors who participate, or plan to participate, in the SBGP.
Specification for Obstruction Lighting Equipment
This AC contains the FAA specification for obstruction lighting equipment. Effective 12 months after the date of this circular, only that equipment qualified per this specification will be listed in AC 150/5345-53, Airport Lighting Equipment Certification Program. No re-testing will be required for existing equipment where test standards are unchanged from the previous version of this AC.
Airport Field Condition Assessments and Winter Operations Safety
This AC provides guidance to assist airport operators in developing a snow and ice control plan, assessing and reporting airport conditions through the utilization of the Runway Condition Assessment Matrix (RCAM), and establishing snow removal and control procedures. Consolidated version includes Change 1.
For implementation purposes, all certificated airports must submit revised Snow and Ice Control Plans to the FAA no later than September 1, 2016, for approval. The Federal NOTAM System is the primary means of conveying airport condition information by certificated and federally obligated airports. Effective October 1, 2016, the Federal NOTAM System will incorporate the new reporting criteria and methodology contained in this AC.
Guidance on the Extraction of Oil and Gas on Federally Obligated Airports
This AC discusses oil and gas development on federally obligated airport land, including any drilling that penetrates the subsurface of airport owned land. It describes how existing FAA policy, guidance, standards and obligations, as well as other applicable laws and regulations, apply to proposed oil and gas extraction from obligated airports (both use of surface land and extraction of subsurface minerals/oil/gas). It does not create new requirements for on-airport or nearby off-airport land use or development. The AC was produced as a joint effort by the FAA’s Offices of Airport Planning and Programming, Airport Safety and Standards, and Airport Compliance and Management Analysis.
Specification for Runway and Taxiway Light Fixtures
Contains FAA specifications for light fixtures to be used on airport runways and taxiways. See also--
Specification for Airport Light Bases, Transformer Housings, Junction Boxes, and Accessories
This advisory circular contains the specifications for airport light bases, transformer housings, junction boxes, accessories, elevated light fixture covers and stakes. It is not intended to be a compilation of currently available product designs. Instead, it provides the basic standard requirements for critical dimensions and performance requirements to which all manufacturers must demonstrate compliance.
Specification for Runway and Taxiway Signs
This AC contains the FAA specifications for unlighted and lighted signs to be used on taxiways and runways.
Airport Data and Information Program
Note: The FAA is moving toward an electronic data submission system with the implementation of the FAA’s Navigation Procedures Project (NAV Lean) solution. Sections of this AC may be used as those portions of the system become available. In the interim, please refer to the current guidance provided in AC 150/5200-35A, Submitting the Airport Master Record in Order to Activate a New Airport for paper-based data submissions.
This AC provides general guidance and information for airport owners and operators in the collection and management of data describing the physical infrastructure, characteristics, and services of their airport. This data is source material for the FAA’s aeronautical information databases, for use in the dissemination of aviation information to the public, preparation of government and private industry aeronautical charts, and related flight information publications. This AC also describes the schedule, frequency, and standards for airport inspections.
Quality Management for Federally Funded Airport Construction Projects
This advisory circular (AC) provides information on the planning and oversight of construction projects at airports accomplished under the FAA's Airport Improvement Program (AIP). In addition to the previous version, this AC cancels:
Ground Vehicle Operations to include Taxiing or Towing an Aircraft on Airports
This AC and its appendices provide guidance to airport operators about developing training programs for safe ground vehicle operations, personnel taxiing or towing an aircraft, and pedestrian control on the movement and safety areas of an airport.
This version represents a major rewrite. The AC now addresses aircraft being taxied by persons other than certificated pilots; adds a definition for Airport Operations Area; revises the definition for Non-Movement Area; replaces the term “Ramp” with “Apron” to harmonize with the International Civil Aviation Organization (ICAO) Annex 14 Volume 1; adds a definition for Vehicle or Pedestrian Deviation; provides guidance for towered airports on Part 139 requirements for people and equipment in the Runway Safety Area (RSA); calls for a Letter of Agreement at towered airports between the airport operator, the tower, and FAA Technical Operations; provides guidance on taxing and/or towing aircraft in the movement area by non-pilots; and incorporates numerous changes to format and content throughout the document.
Programs for Training of Aircraft Rescue and Firefighting Personnel
This AC provides information on courses and reference materials for training of Aircraft Rescue and Firefighting (ARFF) personnel. This revision replaces Appendix 1 with an Addendum of Aircraft Rescue and Firefighting (ARFF) Training Facilities, which the FAA will update on a quarterly basis. It also removes the one minute time requirement for donning of Personal Protective Equipment and the Self-Contained Breathing Apparatus.
Specification for Constant Current Regulators and Regulator Monitors
Contains a specification for constant current regulators (CCR) and a monitor for use with airport lighting circuits.
Guidelines and Procedures for Maintenance of Airport Pavements
This AC provides guidelines and procedures for maintaining airport pavements.
Airport Pavement Management Program (PMP)
This AC discusses the Airport Pavement Management Program (PMP) concept, its essential components, and how it is used to make cost-effective decisions about pavement maintenance and rehabilitation (M&R).
Architectural, Engineering, and Planning Consultant Services for Airport Grant Projects
This AC provides guidance for airport sponsors in the selection and engagement of architectural, engineering, and planning consultants. It also discusses services that normally would be included in an airport grant project, types of contracts for these services, contract format and provisions, and guidelines for determining the reasonableness of consultant fees. Please see the Principal Changes paragraph for a list of major changes from the last version of this AC.
Airport Snow and Ice Control Equipment
This advisory circular provides guidance to assist airport operators in the procurement of snow and ice control equipment for airport use.